Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Minitek 1.0mm Vertical SMT Header, 12 Pos, Tin Plated, Natural Color
Pre-order
5,100,000
Factory Lead Time:14 weeks
10,200+$0.8357
- +
Ext. Price(USD):$8,524.14
MOQ:10,200
Mult:1,700
SPQ:1,700
Wire-to-Board Header, 20 Pos, 4.2mm Pitch, Solder, Straight Top Entry Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.586
- +
Ext. Price(USD):$1,427.40
MOQ:900
Mult:900
SPQ:300
Molex
ECAD Model:
Conn Board to Board PL 120 POS 0.4mm Solder ST SMD SlimStack T/R
Available Stock
64
Estimated Ship Time:3-5 working days
10+
10+$0.3912
50+$0.3846
100+$0.3712
- +
Ext. Price(USD):$3.91
MOQ:10
Mult:10
SPQ:10
Header, 2.54mm, Vertical, 10POS, 2Row, SMD
Available Stock
1,182
Estimated Ship Time:6-12 working days
50+$0.4571
100+$0.4388
200+$0.4388
- +
Ext. Price(USD):$24.22
MOQ:53
Mult:1
TW - Samtec 2mm Flexible Board Stacker Surface Mount 12.37mm Overall Pin Length (04)
Pre-order
100
Factory Lead Time:8-10 weeks
50+$4.0051
100+$3.4743
40,883+$0.9892
88,397+$0.8975
- +
Ext. Price(USD):$252.32
MOQ:63
Mult:1
SPQ:1
Pre-order
1,600,000
Factory Lead Time:15 weeks
3,200+$1.0812
- +
Ext. Price(USD):$3,459.84
MOQ:3,200
Mult:3,200
SPQ:1,600
JST
ECAD Model:
Conn IDC Connector F 10 POS 2mm Solder ST Thru-Hole
Pre-order
120,000
Factory Lead Time:18-22 weeks
26+
12,000+$0.2019
36,000+$0.1986
60,000+$0.1935
- +
Ext. Price(USD):$2,422.80
MOQ:12,000
Mult:12,000
SPQ:12,000
Molex
ECAD Model:
Conn Wire to Board PL 24 POS 2.54mm Solder RA Thru-Hole EXTreme PowerPlus™ Tray
Pre-order
192,000
Factory Lead Time:22-26 weeks
1,920+$4.1
- +
Ext. Price(USD):$7,872.00
MOQ:1,920
Mult:1,920
SPQ:1,920
Molex
ECAD Model:
Pre-order
19,500
Factory Lead Time:22-26 weeks
195+$2.725
780+$2.5875
- +
Ext. Price(USD):$531.37
MOQ:195
Mult:195
SPQ:195
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 6 POS 2mm Solder ST Thru-Hole Bag
Available Stock
50
Estimated Ship Time:3-5 working days
12+
10+$0.5433
50+$0.5341
100+$0.5153
- +
Ext. Price(USD):$5.43
MOQ:10
Mult:10
SPQ:10
Amphenol ICC Wire-to-Board Connector, T816 Series, 2.54mm Pitch, 26-Pin Dual Row, Right Angle, TH
Available Stock
812
Estimated Ship Time:6-12 working days
10+$1.1328
100+$1.0384
500+$1.0384
1,000+$1.0195
2,500+$1.0195
- +
Ext. Price(USD):$24.92
MOQ:22
Mult:1
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 3 POS 2.5mm Solder RA Thru-Hole Bag
Available Stock
40
Estimated Ship Time:3-5 working days
07+
10+$0.4346
50+$0.4273
100+$0.4122
- +
Ext. Price(USD):$4.34
MOQ:10
Mult:10
SPQ:10
Molex
ECAD Model:
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$0.425
6,000+$0.4
- +
Ext. Price(USD):$1,275.00
MOQ:3,000
Mult:3,000
SPQ:3,000
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.1542
- +
Ext. Price(USD):$1,038.78
MOQ:900
Mult:900
SPQ:300
Wire-to-Board HDR 24 Pos 4.2mm Solder ST Top Entry TH
Pre-order
472,500
Factory Lead Time:15 weeks
945+$8.1527
- +
Ext. Price(USD):$7,704.30
MOQ:945
Mult:945
SPQ:315
Conn Shrouded Header HDR 2 POS 2mm Solder ST Thru-Hole Box
Available Stock
18,990
Estimated Ship Time:6-7 working days
23+
20+$0.1308
1,000+$0.0458
- +
Ext. Price(USD):$2.61
MOQ:20
Mult:20
Conn Unshrouded Header HDR 30 POS 1.27mm Solder ST SMD T/R
Pre-order
30,000
Factory Lead Time:10-12 weeks
100+$1.0308
300+$0.9515
- +
Ext. Price(USD):$103.08
MOQ:100
Mult:100
Minitek Reg Pwr 4.2 Hcc Wire-to-Board Connector, Header Single Row Right Angle Through Hole
Pre-order
3,150,000
Factory Lead Time:15 weeks
6,300+$1.2117
- +
Ext. Price(USD):$7,633.71
MOQ:6,300
Mult:6,300
SPQ:2,100
Molex
ECAD Model:
Conn Socket Strip RCP 19 POS 2.54mm Solder ST Thru-Hole Tray
Pre-order
24,300
Factory Lead Time:22-26 weeks
243+$1.3375
972+$1.3
1,000+$1.2625
- +
Ext. Price(USD):$325.01
MOQ:243
Mult:243
SPQ:243
Socket Strip SKT 8 POS 2.54mm Solder ST Top Entry Thru-Hole
Available Stock
8,434
Estimated Ship Time:6-12 working days
50+$0.3056
100+$0.3056
200+$0.3056
- +
Ext. Price(USD):$24.14
MOQ:79
Mult:1
multicomp
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 5 POS 3.5mm Solder ST Top Entry Thru-Hole
Available Stock
388
Estimated Ship Time:6-12 working days
25+$0.7057
100+$0.6774
1,500+$0.6097
2,500+$0.6097
- +
Ext. Price(USD):$24.69
MOQ:35
Mult:1
2.54mm Box Header, Double Row
Available Stock
551
Estimated Ship Time:6-12 working days
10+$0.5953
50+$0.5953
100+$0.5715
200+$0.5715
- +
Ext. Price(USD):$24.40
MOQ:41
Mult:1
Conn Shrouded Header HDR 8 POS 2.5mm Solder RA Thru-Hole Box
Available Stock
2,100
Estimated Ship Time:6-7 working days
26+
100+$0.1836
- +
Ext. Price(USD):$18.36
MOQ:100
Mult:100
Molex
ECAD Model:
Conn Shrouded Header HDR 15 POS 1.5mm Solder RA Side Entry SMD CLIK-Mate T/R
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$1.0875
8,000+$0.9375
20,000+$0.925
- +
Ext. Price(USD):$3,262.50
MOQ:3,000
Mult:3,000
High Power DIP Header Connector
Pre-order
2,550,000
Factory Lead Time:15 weeks
5,100+$2.4791
- +
Ext. Price(USD):$12,643.41
MOQ:5,100
Mult:5,100
SPQ:1,700
25 / PageGoto