Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Conn Shrouded Header HDR 4 POS 1.25mm Solder RA Side Entry SMD
Pre-order
225,000
Factory Lead Time:16-18 weeks
22,500+$0.5404
- +
Ext. Price(USD):$12,159.00
MOQ:22,500
Mult:22,500
Molex
ECAD Model:
Connector Header Unshrouded, 8 POS, 3.96mm, Solder Straight Thru-Hole, Bag
Available Stock
85
Estimated Ship Time:3-5 working days
05+
1+$1.6209
30+$1.5937
50+$1.5378
- +
Ext. Price(USD):$1.62
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Board to Board RCP 50 POS 0.4mm Solder ST SMD SlimStack™ T/R
Available Stock
25
Estimated Ship Time:3-5 working days
15+
10+$0.4781
50+$0.4655
100+$0.4492
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Conn Wire to Wire HDR 19 POS 1.5mm ST Cable Mount Box
Available Stock
2,765
Estimated Ship Time:6-7 working days
21+
20+$0.5215
150+$0.2712
- +
Ext. Price(USD):$10.43
MOQ:20
Mult:20
Pre-order
76,000
Factory Lead Time:22-26 weeks
760+$3.75
1,140+$3.55
5,320+$3.3125
10,260+$3.1125
- +
Ext. Price(USD):$2,850.00
MOQ:760
Mult:760
SPQ:760
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 32 POS 2mm Solder ST Top Entry Thru-Hole Box
Available Stock
8
Estimated Ship Time:3-5 working days
25+
1+$0.0613
50+$0.0597
100+$0.0576
- +
Ext. Price(USD):$0.06
MOQ:1
Mult:1
SPQ:1
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.5763
- +
Ext. Price(USD):$864.45
MOQ:1,500
Mult:1,500
SPQ:500
JST
ECAD Model:
Shrouded Header Connector, HDR, 12 POS, 2.5mm Pitch, Solder RA Thru-Hole
Available Stock
648
Estimated Ship Time:5-7 working days
24+
108+$3.7295
- +
Ext. Price(USD):$402.78
MOQ:108
Mult:108
SPQ:108
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
500,000
Factory Lead Time:15 weeks
1,000+$0.7416
- +
Ext. Price(USD):$741.60
MOQ:1,000
Mult:1,000
SPQ:500
Wire-to-Board HDR 10-Pin 4.2mm Pitch Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$3.4853
- +
Ext. Price(USD):$4,705.15
MOQ:1,350
Mult:450
SPQ:450
Minitek Wire-to-Board Connector Header, Dual Row, Right Angle, Through Hole
Pre-order
450,000
Factory Lead Time:15 weeks
900+$2.8726
- +
Ext. Price(USD):$2,585.34
MOQ:900
Mult:900
SPQ:450
JST
ECAD Model:
Conn Header ST THT
Pre-order
60,000
Factory Lead Time:18-22 weeks
26+
6,000+$0.5257
18,000+$0.5169
30,000+$0.5037
- +
Ext. Price(USD):$3,154.20
MOQ:6,000
Mult:6,000
SPQ:6,000
Available Stock
14
Estimated Ship Time:4-6 working days
23+
1+$15.2219
- +
Ext. Price(USD):$15.22
MOQ:1
Mult:1
Minitek Reg Pwr 3.0 Wire-to-Board Connector, Header, Dual Row, Right Angle, SMT
Pre-order
1,500,000
Factory Lead Time:15 weeks
3,000+$2.0351
- +
Ext. Price(USD):$6,105.30
MOQ:3,000
Mult:3,000
SPQ:600
Molex
ECAD Model:
Conn Board to Board RCP 7Power/15Signal POS 2mm/11mm Solder RA Thru-Hole Tray
Pre-order
60,000
Factory Lead Time:22-26 weeks
600+$17.7875
1,200+$15.55
3,000+$15.2375
- +
Ext. Price(USD):$10,672.50
MOQ:600
Mult:600
JST
Package:SMD,P=2mm
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 15 POS 2mm Solder ST Top Entry SMD T/R
Available Stock
1,122
Estimated Ship Time:6-7 working days
25+
20+$1.2104
500+$0.5377
- +
Ext. Price(USD):$24.20
MOQ:20
Mult:20
Molex
ECAD Model:
Pre-order
250,000
Factory Lead Time:22-26 weeks
2,500+$2.0875
5,000+$1.95
- +
Ext. Price(USD):$5,218.75
MOQ:2,500
Mult:2,500
SPQ:2,500
CONNECTOR, HEADER, 64POS, 2ROW, 2.5MM; Pitch Spacing:2.54mm; No. of Contacts:64Contacts; Gender:Header; Product Range:-; Contact Termination Type:Through Hole; No. of Rows:2Rows; Contact Plating:Gold Plated Contacts; Con
Available Stock
155
Estimated Ship Time:6-12 working days
10+$0.9906
50+$0.951
100+$0.8876
200+$0.8876
- +
Ext. Price(USD):$24.76
MOQ:25
Mult:1
Pre-order
2,400,000
Factory Lead Time:8 weeks
4,800+$0.8861
- +
Ext. Price(USD):$4,253.28
MOQ:4,800
Mult:2,400
SPQ:2,400
JFA CONNECTOR J300 Series 3.81/5.08mm Pitch Disconnectable Crimp Style Connectors (Wire-to-Board/Wire-to-Wire)
Available Stock
88
Estimated Ship Time:14-17 working days
10+$3.5894
30+$3.0154
500+$2.2645
1,000+$2.2566
- +
Ext. Price(USD):$50.25
MOQ:14
Mult:1
SPQ:1
Wire-to-Board HDR, 18 Pos, 4.2mm Pitch, Solder, ST Top Entry, TH, Tray
Pre-order
540,000
Factory Lead Time:15 weeks
1,080+$7.8917
- +
Ext. Price(USD):$8,523.03
MOQ:1,080
Mult:1,080
SPQ:360
Wire-to-Board Connector Header 8-Pin 3mm Pitch Solder Straight Top Entry TH Tray
Pre-order
1,687,500
Factory Lead Time:15 weeks
3,375+$0.8217
- +
Ext. Price(USD):$2,773.23
MOQ:3,375
Mult:3,375
SPQ:1,125
JST
ECAD Model:
Board-to-Board Connector RCP 6 POS 2.5mm Solder ST Thru-Hole Box
Available Stock
265
Estimated Ship Time:6-7 working days
24+
20+$0.6498
250+$0.2906
- +
Ext. Price(USD):$12.99
MOQ:20
Mult:20
Jumper Connectors, 3A AC/DC
Available Stock
1,000
Estimated Ship Time:14-17 working days
100+$0.2562
300+$0.2
5,000+$0.1474
10,000+$0.1463
- +
Ext. Price(USD):$50.21
MOQ:196
Mult:1
SPQ:1
Molex
ECAD Model:
1.0 mm Wire-to-Board 1-Row Straight
Pre-order
27,500
Factory Lead Time:22-26 weeks
275+$0.475
550+$0.4375
1,100+$0.4125
2,500+$0.3575
5,000+$0.3325
- +
Ext. Price(USD):$130.62
MOQ:275
Mult:275
SPQ:275
25 / PageGoto