Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Pre-order
141,000
Factory Lead Time:22-26 weeks
1,410+$1.2625
2,820+$1.125
5,029+$1.05
10,011+$0.975
- +
Ext. Price(USD):$1,780.12
MOQ:1,410
Mult:1,410
SPQ:1,410
JST
ECAD Model:
Conn Shrouded Header HDR 4 POS 2mm Solder RA Thru-Hole Automotive Box
Pre-order
180,000
Factory Lead Time:18-22 weeks
26+
18,000+$0.0801
54,000+$0.0788
90,000+$0.0767
- +
Ext. Price(USD):$1,441.80
MOQ:18,000
Mult:18,000
SPQ:18,000
JST
ECAD Model:
IDC Connector Receptacle, 4-Pos, 3.96mm Pitch
Available Stock
3,000
Estimated Ship Time:4-6 working days
1,000+$0.2923
- +
Ext. Price(USD):$292.30
MOQ:1,000
Mult:1,000
SPQ:1,000
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.7416
- +
Ext. Price(USD):$1,112.40
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board Header 14 POS 3mm Solder ST Top Entry Thru-Hole Tray
Pre-order
1,080,000
Factory Lead Time:15 weeks
2,160+$1.687
- +
Ext. Price(USD):$3,643.92
MOQ:2,160
Mult:2,160
SPQ:720
Wire-to-Board Header, 20 Pos, 4.2mm Pitch, Solder, Straight Top Entry Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.1647
- +
Ext. Price(USD):$1,048.23
MOQ:900
Mult:900
SPQ:300
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.8827
- +
Ext. Price(USD):$1,059.24
MOQ:1,200
Mult:1,200
SPQ:400
Wire-to-Board HDR 6 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.914
- +
Ext. Price(USD):$1,645.20
MOQ:1,800
Mult:1,800
SPQ:600
Wire-to-Board HDR 12 POS 3mm Solder ST Top Entry Thru-Hole T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.7626
- +
Ext. Price(USD):$1,372.68
MOQ:1,800
Mult:1,800
SPQ:600
Pre-order
132,000
Factory Lead Time:22-26 weeks
1,320+$6.1125
5,005+$5.7
10,010+$5.3625
- +
Ext. Price(USD):$8,068.50
MOQ:1,320
Mult:1,320
SPQ:1,320
Wire-to-Board HDR, 2 POS, 4.2mm, ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.5171
- +
Ext. Price(USD):$775.65
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.928
- +
Ext. Price(USD):$1,392.00
MOQ:1,500
Mult:1,500
SPQ:500
IDC Connector F 12 POS 3.96mm IDT RA Cable Mount
Pre-order
25,000
Factory Lead Time:22-26 weeks
250+$6.8375
500+$6.4625
1,000+$5.675
25,000+$5.05
50,000+$4.425
- +
Ext. Price(USD):$1,709.37
MOQ:250
Mult:250
SPQ:250
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.9018
- +
Ext. Price(USD):$1,082.16
MOQ:1,200
Mult:1,200
SPQ:400
Wire-to-Board Connector Header 10 Pos 4.2mm Pitch Solder RA Side Entry TH
Pre-order
630,000
Factory Lead Time:15 weeks
1,260+$3.0936
- +
Ext. Price(USD):$3,897.93
MOQ:1,260
Mult:1,260
SPQ:420
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.2413
- +
Ext. Price(USD):$1,117.17
MOQ:900
Mult:900
SPQ:300
Conn Wire to Wire HDR 27 POS 1mm IDT ST Cable Mount Box
Available Stock
1,724
Estimated Ship Time:6-7 working days
22+
20+$0.7335
100+$0.3809
- +
Ext. Price(USD):$14.67
MOQ:20
Mult:20
Pre-order
500,000
Factory Lead Time:22-26 weeks
5,000+$1.4125
10,000+$1.3
25,000+$1.2
50,000+$1.1375
- +
Ext. Price(USD):$7,062.50
MOQ:5,000
Mult:5,000
SPQ:5,000
Conn Unshrouded Header HDR 36 POS 2.54mm Solder ST Top Entry Thru-Hole
Available Stock
73
Estimated Ship Time:6-12 working days
1+$4.2316
10+$3.7238
500+$3.6561
1,000+$3.6561
- +
Ext. Price(USD):$25.38
MOQ:6
Mult:1
JST
ECAD Model:
Conn Shrouded Header HDR 3 POS 2mm Solder RA Thru-Hole Automotive Box
Pre-order
240,000
Factory Lead Time:18-22 weeks
26+
24,000+$0.0931
72,000+$0.0916
120,000+$0.0892
- +
Ext. Price(USD):$2,234.40
MOQ:24,000
Mult:24,000
SPQ:24,000
JST
ECAD Model:
Wire-to-Board Connector RCP 6POS 2mm IDT TH
Pre-order
20,000
Factory Lead Time:18 weeks
2,000+$0.0574
10,000+$0.056
- +
Ext. Price(USD):$114.80
MOQ:2,000
Mult:2,000
SPQ:2,000
Wire-to-Board HDR, 4 Pos, 4.2mm Pitch, Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.7235
- +
Ext. Price(USD):$2,326.72
MOQ:1,350
Mult:450
SPQ:450
Board-to-Board Connector, 2.5mm Pitch
Available Stock
1,300
Estimated Ship Time:6-7 working days
23+
100+$0.2296
- +
Ext. Price(USD):$22.96
MOQ:100
Mult:100
JST
ECAD Model:
IDC Connector SKT 7 POS 2mm IDT RA Cable Mount
Available Stock
15,043
Estimated Ship Time:6-7 working days
21+
20+$0.2642
1,000+$0.0927
- +
Ext. Price(USD):$5.28
MOQ:20
Mult:20
Minitek Reg Pwr 5.7 Wire-to-Board Connector Right Angle TH Header Dual Row Black 8 Pos Tin Plating Glow Wire Compatible T/R Packing
Pre-order
3,000,000
Factory Lead Time:15 weeks
6,000+$1.9673
- +
Ext. Price(USD):$11,803.80
MOQ:6,000
Mult:6,000
SPQ:400
25 / PageGoto