Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Pre-order
259,200
Factory Lead Time:22-26 weeks
2,592+$0.75
5,184+$0.7125
- +
Ext. Price(USD):$1,944.00
MOQ:2,592
Mult:2,592
SPQ:2,592
Wire to Board Connector 3.0mm Right Angle TH Header
Pre-order
525,000
Factory Lead Time:15 weeks
1,050+$5.9052
- +
Ext. Price(USD):$6,200.46
MOQ:1,050
Mult:1,050
SPQ:210
Molex
ECAD Model:
Pre-order
495,000
Factory Lead Time:22-26 weeks
4,950+$1.5625
- +
Ext. Price(USD):$7,734.37
MOQ:4,950
Mult:4,950
SPQ:4,950
Molex
ECAD Model:
2.00mm Pitch Milli Grid PCB Header Dual Row Vertical TH, 0.75μm Gold Au Plating, No Peg, 3.60mm Tail, Pick & Place Cap, 48 Circuits, Glow Wire, Tube
Pre-order
560,000
Factory Lead Time:22-26 weeks
5,600+$4.625
- +
Ext. Price(USD):$25,900.00
MOQ:5,600
Mult:5,600
SPQ:5,600
JST
ECAD Model:
Wire to Board Connector SKT 14POS 0.5mm SMD
Pre-order
90,000
Factory Lead Time:18-22 weeks
26+
9,000+$0.6615
27,000+$0.6504
45,000+$0.6339
- +
Ext. Price(USD):$5,953.50
MOQ:9,000
Mult:9,000
SPQ:9,000
Minitek Reg Pwr 3.0 Wire-to-Board Connector Header Dual Row Vertical SMT Tails Hold Down Gold Flash Black 22 Pos Glow Wire Compatible
Pre-order
3,000,000
Factory Lead Time:15 weeks
6,000+$2.1866
- +
Ext. Price(USD):$13,119.60
MOQ:6,000
Mult:6,000
SPQ:600
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.9558
- +
Ext. Price(USD):$1,146.96
MOQ:1,200
Mult:1,200
SPQ:400
Rib-Cage® Board-to-Board Connector, SMD Vertical Shrouded PCB Header, 100 Pos, Holddown Mount
Pre-order
250,000
Factory Lead Time:8 weeks
500+$6.2535
- +
Ext. Price(USD):$3,126.75
MOQ:500
Mult:500
SPQ:500
Available Stock
200
Estimated Ship Time:4-6 working days
26+
1+$1.4167
- +
Ext. Price(USD):$1.41
MOQ:1
Mult:1
SPQ:1
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$5.4735
- +
Ext. Price(USD):$6,568.20
MOQ:1,200
Mult:1,200
SPQ:400
Pre-order
726,000
Factory Lead Time:8 weeks
1,452+$0.4822
- +
Ext. Price(USD):$700.15
MOQ:1,452
Mult:1,452
SPQ:1,452
Minitek Reg Pwr 4.2 Hcc Wire To Board Connector Header Dual Row Right Angle TH 30 Gold Plating Natural Color 6 Pos Lcp Glow Wire
Pre-order
420,000
Factory Lead Time:15 weeks
840+$3.125
- +
Ext. Price(USD):$2,625.00
MOQ:840
Mult:840
SPQ:840
Pre-order
2,760,000
Factory Lead Time:12 weeks
5,520+$5.9088
- +
Ext. Price(USD):$32,616.57
MOQ:5,520
Mult:690
SPQ:690
JST
ECAD Model:
IDC Recept NR 2.5 AWG22 Red
Pre-order
180,000
Factory Lead Time:16-18 weeks
18,000+$0.0804
- +
Ext. Price(USD):$1,447.20
MOQ:18,000
Mult:18,000
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$6.3474
- +
Ext. Price(USD):$5,712.66
MOQ:900
Mult:900
SPQ:300
Molex
ECAD Model:
Conn Unshrouded Header HDR 76 POS 2.54mm Solder ST Thru-Hole C-Grid III Tray
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$5.1125
- +
Ext. Price(USD):$15,337.50
MOQ:3,000
Mult:3,000
SPQ:3,000
Wire-to-Board Header 16 Pos 3mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.8193
- +
Ext. Price(USD):$2,456.05
MOQ:1,350
Mult:1,350
SPQ:450
JST
ECAD Model:
Board to Board Connector Receptacle 30 Pos 1.27mm Solder RA Thru-Hole
Pre-order
16,660
Factory Lead Time:18-22 weeks
26+
1,666+$3.3642
4,998+$3.3081
8,330+$3.2241
- +
Ext. Price(USD):$5,604.75
MOQ:1,666
Mult:1,666
SPQ:1,666
Conn Unshrouded Header HDR 5 POS 2.5mm Solder ST Thru-Hole
Available Stock
996
Estimated Ship Time:14-17 working days
100+$0.2041
500+$0.1932
1,000+$0.1715
2,000+$0.1598
4,000+$0.1586
- +
Ext. Price(USD):$50.00
MOQ:245
Mult:1
SPQ:1
JST
ECAD Model:
Disconnectable Crimp Style Connectors
Available Stock
500
Estimated Ship Time:6-7 working days
20+$0.1923
- +
Ext. Price(USD):$3.84
MOQ:20
Mult:20
Molex
ECAD Model:
Conn Board to Board RCP 8Power POS 2mm/2.5mm Solder RA Side Entry Thru-Hole EXTreme LPHPower™ Tray
Pre-order
80,000
Factory Lead Time:22-26 weeks
800+$6.725
1,600+$5.9
4,000+$5.7625
- +
Ext. Price(USD):$5,380.00
MOQ:800
Mult:800
Wire-to-Board HDR 18 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.867
- +
Ext. Price(USD):$1,170.45
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.0236
- +
Ext. Price(USD):$1,228.32
MOQ:1,200
Mult:400
SPQ:400
Wire-to-Board HDR, 20 Pos, 4.2mm Pitch, Solder, RA Side Entry, TH, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.3004
- +
Ext. Price(USD):$1,755.54
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board Header 16 Pos 3mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.8193
- +
Ext. Price(USD):$2,456.05
MOQ:1,350
Mult:1,350
SPQ:450
25 / PageGoto