Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Wire-to-Board HDR, 24 Pos, 1.25mm, Solder RA Side Entry, SMD, T/R
Pre-order
200,000
Factory Lead Time:22-26 weeks
2,000+$2.75
4,000+$2.4125
10,000+$2.3625
- +
Ext. Price(USD):$5,500.00
MOQ:2,000
Mult:2,000
Board to Board Connector, 60 Pos, 0.5mm Pitch, Solder, Straight Top Entry, SMD, T/R
Pre-order
20,000
Factory Lead Time:18-22 weeks
26+
2,000+$1.7692
6,000+$1.7397
10,000+$1.6955
- +
Ext. Price(USD):$3,538.40
MOQ:2,000
Mult:2,000
SPQ:2,000
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 4 POS 2mm Solder RA Side Entry Thru-Hole Box
Available Stock
9
Estimated Ship Time:4-6 working days
1+$0.0497
1,000+$0.0464
- +
Ext. Price(USD):$0.04
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
Pre-order
2,400,000
Factory Lead Time:22-26 weeks
24,000+$0.7
80,000+$0.625
200,000+$0.6125
- +
Ext. Price(USD):$16,800.00
MOQ:24,000
Mult:24,000
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$2.8308
- +
Ext. Price(USD):$4,246.20
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.806
- +
Ext. Price(USD):$1,209.00
MOQ:1,500
Mult:500
SPQ:500
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$2.883
- +
Ext. Price(USD):$4,324.50
MOQ:1,500
Mult:500
SPQ:500
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.3256
- +
Ext. Price(USD):$976.80
MOQ:3,000
Mult:1,500
SPQ:500
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.9558
- +
Ext. Price(USD):$1,146.96
MOQ:1,200
Mult:1,200
SPQ:400
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 16 POS 2mm Solder RA Side Entry Thru-Hole Box
Available Stock
5,000
Estimated Ship Time:4-6 working days
250+$0.224
- +
Ext. Price(USD):$56.00
MOQ:250
Mult:250
SPQ:250
Minitek Power Header, 5.7mm Pitch
Pre-order
3,072,000
Factory Lead Time:15 weeks
6,144+$2.0038
- +
Ext. Price(USD):$12,311.34
MOQ:6,144
Mult:6,144
SPQ:3,072
Wire-to-Board HDR 22 Pos 4.2mm Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$7.5782
- +
Ext. Price(USD):$10,230.57
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
Pre-order
200,000
Factory Lead Time:22-26 weeks
2,000+$1.05
4,000+$1.0375
5,000+$0.95
- +
Ext. Price(USD):$2,100.00
MOQ:2,000
Mult:2,000
SPQ:2,000
Wire-to-Board HDR, 4 Pos, 4.2mm Pitch, Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.4805
- +
Ext. Price(USD):$1,297.35
MOQ:2,700
Mult:1,350
SPQ:450
Molex
ECAD Model:
Shrouded Header, 34 POS, 2mm Pitch, Solder RA Side Entry, Thru-Hole, Tube
Pre-order
504,000
Factory Lead Time:22-26 weeks
5,040+$3.3875
- +
Ext. Price(USD):$17,073.00
MOQ:5,040
Mult:5,040
SPQ:5,040
Conn Shrouded Header HDR 19 POS 1.5mm Solder ST Thru-Hole Box
Pre-order
39,200
Factory Lead Time:16-18 weeks
3,920+$0.0827
- +
Ext. Price(USD):$324.18
MOQ:3,920
Mult:3,920
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$8.6786
- +
Ext. Price(USD):$7,810.74
MOQ:900
Mult:300
SPQ:300
Wire-to-Board HDR 12-Pin 4.2mm Solder Right Angle Side Entry TH
Pre-order
540,000
Factory Lead Time:15 weeks
1,080+$4.0233
- +
Ext. Price(USD):$4,345.16
MOQ:1,080
Mult:1,080
SPQ:360
Conn Shrouded Header M 3 POS 3.5mm Solder RA Thru-Hole
Available Stock
764
Estimated Ship Time:6-12 working days
10+$0.6851
100+$0.6138
1,000+$0.5919
2,500+$0.5919
- +
Ext. Price(USD):$27.40
MOQ:40
Mult:10
Wire-to-Board HDR 12 POS 3mm Solder ST Top Entry Thru-Hole T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.7782
- +
Ext. Price(USD):$1,400.76
MOQ:1,800
Mult:1,800
SPQ:600
Conn Unshrouded Header HDR 8 POS 2.54mm Solder ST Top Entry SMD BergStik Bag
Pre-order
9,000,000
Factory Lead Time:17 weeks
18,000+$0.1933
- +
Ext. Price(USD):$3,479.40
MOQ:18,000
Mult:500
SPQ:500
Molex
ECAD Model:
Pre-order
32,500
Factory Lead Time:22-26 weeks
325+$0.975
1,300+$0.9375
- +
Ext. Price(USD):$316.87
MOQ:325
Mult:325
SPQ:325
Conn Shrouded Header HDR 2 POS 2.5mm Solder ST Thru-Hole Box
Available Stock
3,605
Estimated Ship Time:5-9 working days
22+
10+$0.15
50+$0.1168
150+$0.1149
- +
Ext. Price(USD):$1.50
MOQ:10
Mult:5
SPQ:400
JST
ECAD Model:
Shrouded Header HDR 10 Pos 2.5mm Solder RA Thru-Hole Box
Available Stock
840
Estimated Ship Time:4-6 working days
168+$2.1805
- +
Ext. Price(USD):$366.32
MOQ:168
Mult:168
SPQ:168
Wire-to-Board HDR 6 Pos 4.2mm Solder RA Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.4512
- +
Ext. Price(USD):$3,309.12
MOQ:1,350
Mult:450
SPQ:450
25 / PageGoto