Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board Connector HDR 20 Pos 3mm Solder RA Side Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.9296
- +
Ext. Price(USD):$1,673.28
MOQ:1,800
Mult:1,800
SPQ:600
Molex
ECAD Model:
Conn Wire to Board PL 16Signal POS 1.27mm Solder RA Thru-Hole Tray
Pre-order
84,000
Factory Lead Time:22-26 weeks
840+$3.575
2,000+$3.125
5,000+$3.0625
- +
Ext. Price(USD):$3,003.00
MOQ:840
Mult:840
Wire-to-Board HDR 12 Pos 3mm Solder ST Top Entry TH Tray
Pre-order
1,215,000
Factory Lead Time:15 weeks
2,430+$1.4658
- +
Ext. Price(USD):$3,561.89
MOQ:2,430
Mult:810
SPQ:810
JST
ECAD Model:
Conn Wire to Board HDR 2 POS 7.92mm Solder ST Thru-Hole Box
Available Stock
67,000
Estimated Ship Time:4-6 working days
1,000+$0.0532
- +
Ext. Price(USD):$53.20
MOQ:1,000
Mult:1,000
SPQ:1,000
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.6233
- +
Ext. Price(USD):$934.95
MOQ:1,500
Mult:1,500
SPQ:500
Conn Wire-to-Wire HDR 3 POS 1mm IDT ST Cable Mount Box
Available Stock
6,200
Estimated Ship Time:6-7 working days
22+
20+$0.2064
300+$0.1067
- +
Ext. Price(USD):$4.12
MOQ:20
Mult:20
Wire-to-Board HDR 20 Pos 3mm Solder Straight Top Entry TH Tray
Pre-order
742,500
Factory Lead Time:15 weeks
1,485+$2.2876
- +
Ext. Price(USD):$3,397.08
MOQ:1,485
Mult:1,485
SPQ:495
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.6748
- +
Ext. Price(USD):$1,507.32
MOQ:900
Mult:900
SPQ:300
Pre-order
200,000
Factory Lead Time:22-26 weeks
2,000+$2.4125
5,000+$2.25
10,000+$2.125
- +
Ext. Price(USD):$4,825.00
MOQ:2,000
Mult:2,000
SPQ:2,000
Pre-order
342,000
Factory Lead Time:22-26 weeks
3,420+$1.4875
5,016+$1.375
10,032+$1.3
- +
Ext. Price(USD):$5,087.25
MOQ:3,420
Mult:3,420
SPQ:3,420
Minitek PWR 3.0 Wire-to-Board Connector, Header, Dual Row
Pre-order
742,500
Factory Lead Time:15 weeks
1,485+$1.5668
- +
Ext. Price(USD):$2,326.69
MOQ:1,485
Mult:1,485
SPQ:495
Molex
ECAD Model:
Conn Unshrouded Header HDR 24 POS 2mm Solder ST Top Entry SMD Milli-Grid™ T/R
Pre-order
75,000
Factory Lead Time:22-26 weeks
750+$2.225
1,500+$2.15
2,500+$1.8625
5,000+$1.7375
- +
Ext. Price(USD):$1,668.75
MOQ:750
Mult:750
SPQ:750
Shrouded Header (4 Sides) HDR 3 POS 1.5mm Solder RA Side Entry SMD T/R
Available Stock
539
Estimated Ship Time:6-7 working days
20+$0.2983
- +
Ext. Price(USD):$5.96
MOQ:20
Mult:20
Conn Spring Loaded Connector HDR 6 POS 2.54mm Solder ST Top Entry SMD
Available Stock
34
Estimated Ship Time:6-12 working days
1+$6.3778
10+$5.6124
500+$5.5104
1,000+$5.5104
- +
Ext. Price(USD):$25.51
MOQ:4
Mult:1
Conn Unshrouded Header HDR 30 POS 2.54mm Solder RA Side Entry Thru-Hole Tray
Pre-order
37,500
Factory Lead Time:22-26 weeks
375+$4.725
750+$4.225
5,000+$3.1125
10,000+$2.4
50,000+$2
- +
Ext. Price(USD):$1,771.87
MOQ:375
Mult:375
SPQ:375
Wire-to-Board HDR 6 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.914
- +
Ext. Price(USD):$1,645.20
MOQ:1,800
Mult:1,800
SPQ:600
Molex
ECAD Model:
Pre-order
89,600
Factory Lead Time:22-26 weeks
896+$2.8125
2,000+$2.45
5,000+$2.4
- +
Ext. Price(USD):$2,520.00
MOQ:896
Mult:896
Shrouded Header HDR 12 POS 5.08mm Solder ST Thru-Hole Box
Available Stock
72
Estimated Ship Time:14-17 working days
10+$3.3524
30+$2.7729
500+$2.0623
1,000+$2.0555
- +
Ext. Price(USD):$50.28
MOQ:15
Mult:1
SPQ:1
Wire-to-Board HDR 14-Pin 4.2mm Solder RA Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.0481
- +
Ext. Price(USD):$1,414.93
MOQ:1,350
Mult:1,350
SPQ:450
JST
ECAD Model:
Conn IDC HDR 3 POS 2.5mm IDT ST Thru-Hole Box
Pre-order
180,000
Factory Lead Time:18-22 weeks
26+
18,000+$0.101
54,000+$0.0993
90,000+$0.0967
- +
Ext. Price(USD):$1,818.00
MOQ:18,000
Mult:18,000
SPQ:18,000
Wire-to-Board HDR 10 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.4728
- +
Ext. Price(USD):$2,651.04
MOQ:1,800
Mult:1,800
SPQ:600
JST
ECAD Model:
Wire-to-Board Connector HDR 2 Pos 11.88mm Pitch Solder Straight Thru-Hole Box
Available Stock
5,977
Estimated Ship Time:6-7 working days
22+
20+$0.1662
500+$0.0565
- +
Ext. Price(USD):$3.32
MOQ:20
Mult:20
Wire-to-Board Connector
Pre-order
520,000
Factory Lead Time:22-26 weeks
5,200+$5.05
10,400+$4.2875
25,350+$4.0375
- +
Ext. Price(USD):$26,260.00
MOQ:5,200
Mult:5,200
JST
ECAD Model:
IDC Connector, F, 7 Pos, 2mm Pitch, Solder, ST, TH, Automotive, Box
Pre-order
180,000
Factory Lead Time:18-22 weeks
26+
18,000+$0.1413
54,000+$0.139
90,000+$0.1355
- +
Ext. Price(USD):$2,543.40
MOQ:18,000
Mult:18,000
SPQ:18,000
Pre-order
840,000
Factory Lead Time:15 weeks
1,680+$1.0063
- +
Ext. Price(USD):$1,690.58
MOQ:1,680
Mult:1,680
SPQ:1,680
25 / PageGoto