Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Header Housing Assy EP 2.5 RA 5 Pos.
Pre-order
800,000
Factory Lead Time:25-42 weeks
8,000+$0.1496
- +
Ext. Price(USD):$1,196.80
MOQ:8,000
Mult:500
SPQ:500
JST
ECAD Model:
Conn Shrouded Header HDR 20 POS 1.5mm Solder ST Thru-Hole
Available Stock
3,024
Estimated Ship Time:4-6 working days
336+$0.1318
- +
Ext. Price(USD):$44.28
MOQ:336
Mult:336
SPQ:336
JST
ECAD Model:
Conn Unshrouded Header HDR 5 POS 8mm Solder ST Thru-Hole Box
Available Stock
200
Estimated Ship Time:6-7 working days
22+
200+$0.3019
- +
Ext. Price(USD):$60.38
MOQ:200
Mult:200
Molex
ECAD Model:
Pre-order
600,000
Factory Lead Time:22-26 weeks
6,000+$0.2113
12,000+$0.1988
- +
Ext. Price(USD):$1,267.80
MOQ:6,000
Mult:6,000
SPQ:6,000
Wire-to-Board HDR 12 POS 3mm Solder ST Top Entry Thru-Hole T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.5337
- +
Ext. Price(USD):$2,760.66
MOQ:1,800
Mult:1,800
SPQ:600
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 30 POS 2.54mm Solder ST Top Entry Thru-Hole C-Grid® Tube
Pre-order
105,600
Factory Lead Time:22-26 weeks
1,056+$5.175
2,500+$4.5
5,000+$4.1875
- +
Ext. Price(USD):$5,464.80
MOQ:1,056
Mult:1,056
SPQ:1,056
JST
ECAD Model:
Board-to-Board Connector RCP 17 POS 1.25mm Solder Straight Thru-Hole Box
Available Stock
110
Estimated Ship Time:4-6 working days
25+
1+$0.7084
- +
Ext. Price(USD):$0.70
MOQ:1
Mult:1
SPQ:1
Wire-to-Board Header, 20 Pos, 4.2mm Pitch, Solder, Straight Top Entry Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.1055
- +
Ext. Price(USD):$994.95
MOQ:900
Mult:900
SPQ:300
JST
ECAD Model:
Available Stock
400
Estimated Ship Time:14-17 working days
50+$0.8234
100+$0.6845
4,000+$0.539
10,000+$0.5379
- +
Ext. Price(USD):$50.22
MOQ:61
Mult:1
SPQ:1
Conn Shrouded Header HDR 2 POS 3.96mm Solder ST Thru-Hole Box
Available Stock
12,645
Estimated Ship Time:6-7 working days
22+
20+$0.172
250+$0.0737
- +
Ext. Price(USD):$3.44
MOQ:20
Mult:20
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.6226
- +
Ext. Price(USD):$1,460.34
MOQ:900
Mult:900
SPQ:300
Minitek Reg Pwr 3.0 Wire-to-Board Connector Header Dual Row Right Angle SMT Tails Hold Down Gold Flash Plating Black 16 Pos Glow Wire Compatible
Pre-order
3,000,000
Factory Lead Time:15 weeks
6,000+$1.969
- +
Ext. Price(USD):$11,814.00
MOQ:6,000
Mult:6,000
SPQ:600
JST
ECAD Model:
Conn Shrouded Header HDR 3 POS 2.5mm Solder ST Thru-Hole Box
Available Stock
40
Estimated Ship Time:4-6 working days
25+
5+$2.7432
- +
Ext. Price(USD):$13.71
MOQ:5
Mult:5
SPQ:1
Wire-to-Wire Connector RCP 6 POS 1.5mm Crimp ST Cable Mount Box
Available Stock
560
Estimated Ship Time:6-7 working days
24+
80+$1.2517
- +
Ext. Price(USD):$100.13
MOQ:80
Mult:80
Pre-order
2,700,000
Factory Lead Time:12 weeks
5,400+$7.2005
- +
Ext. Price(USD):$38,882.70
MOQ:5,400
Mult:900
SPQ:900
JST
ECAD Model:
Shrouded Header HDR 6 POS 2mm Solder ST Thru-Hole Box
Pre-order
120,000
Factory Lead Time:18-22 weeks
26+
12,000+$0.0606
36,000+$0.0596
60,000+$0.0581
- +
Ext. Price(USD):$727.20
MOQ:12,000
Mult:12,000
SPQ:12,000
Wire-to-Board HDR 6 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.914
- +
Ext. Price(USD):$1,645.20
MOQ:1,800
Mult:1,800
SPQ:600
JST
ECAD Model:
Conn Shrouded Header (4 Sides), HDR 2 POS, 2.5mm, Solder ST Top Entry, TH, Box
Available Stock
35,221
Estimated Ship Time:4-6 working days
1+$0.0247
1,000+$0.022
- +
Ext. Price(USD):$0.02
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
Shrouded Header (4 Sides) HDR 2 POS 2mm Solder ST Thru-Hole Tube
Pre-order
210,000
Factory Lead Time:22-26 weeks
2,100+$0.7875
4,200+$0.7375
- +
Ext. Price(USD):$1,653.75
MOQ:2,100
Mult:2,100
SPQ:2,100
JST
ECAD Model:
IDC Connector F 5 POS 2mm Solder ST Thru-Hole Automotive
Pre-order
240,000
Factory Lead Time:18-22 weeks
26+
24,000+$0.1967
72,000+$0.1935
120,000+$0.1885
- +
Ext. Price(USD):$4,720.80
MOQ:24,000
Mult:24,000
SPQ:24,000
JST
ECAD Model:
Through Hole Type Shrouded Header
Pre-order
180,000
Factory Lead Time:18-22 weeks
26+
18,000+$0.2801
54,000+$0.2754
90,000+$0.2684
- +
Ext. Price(USD):$5,041.80
MOQ:18,000
Mult:18,000
SPQ:18,000
Wire-to-Board Header, 18 Pos, 4.2mm Pitch, Solder RA Side Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.2779
- +
Ext. Price(USD):$1,725.16
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board Connector HDR 10 Pos 4.2mm Solder Top Entry Thru-Hole
Pre-order
945,000
Factory Lead Time:15 weeks
1,890+$0.9958
- +
Ext. Price(USD):$1,882.06
MOQ:1,890
Mult:1,890
SPQ:630
Molex
ECAD Model:
Pre-order
22,500
Factory Lead Time:22-26 weeks
225+$1.2875
900+$1.2625
1,000+$1.225
- +
Ext. Price(USD):$289.68
MOQ:225
Mult:225
SPQ:225
Connector MODU 08P
Pre-order
1,000,000
Factory Lead Time:22-26 weeks
10,000+$0.1063
- +
Ext. Price(USD):$1,063.00
MOQ:10,000
Mult:10,000
SPQ:10,000
25 / PageGoto