Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board HDR 16 Pos 4.2mm Solder ST Top Entry TH
Pre-order
607,500
Factory Lead Time:15 weeks
1,215+$5.5083
- +
Ext. Price(USD):$6,692.58
MOQ:1,215
Mult:1,215
SPQ:405
Wire-to-Board HDR 10-Pin 4.2mm Pitch Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$3.4088
- +
Ext. Price(USD):$4,601.88
MOQ:1,350
Mult:1,350
SPQ:450
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 10 POS 2mm Solder ST Top Entry Thru-Hole Box
Available Stock
450
Estimated Ship Time:4-6 working days
1+$0.1549
- +
Ext. Price(USD):$0.15
MOQ:1
Mult:1
SPQ:1
JST
ECAD Model:
Shrouded Header, 3 Pos, 6.35mm Pitch, Solder RA Thru-Hole
Available Stock
427
Estimated Ship Time:6-7 working days
21+
20+$6.9257
64+$1.8007
- +
Ext. Price(USD):$138.51
MOQ:20
Mult:20
multicomp
ECAD Model:
Wire-to-Board HDR 3 POS 3.5mm Solder RA Thru-Hole
Available Stock
173
Estimated Ship Time:6-12 working days
1+$0.5943
250+$0.5943
500+$0.5836
1,000+$0.573
5,000+$0.573
- +
Ext. Price(USD):$24.36
MOQ:41
Mult:1
MICT 260 PLG 266 ASY .025 PDNI
Pre-order
40,500
Factory Lead Time:22-26 weeks
405+$153.1625
500+$130.1
1,000+$115.275
2,500+$98.8
5,000+$88.9375
- +
Ext. Price(USD):$62,030.81
MOQ:405
Mult:405
SPQ:405
Wire-to-Board Header, 24 POS, 4.2mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.5355
- +
Ext. Price(USD):$2,072.92
MOQ:1,350
Mult:1,350
SPQ:450
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.4143
- +
Ext. Price(USD):$745.74
MOQ:1,800
Mult:1,800
SPQ:1,800
Minitek Reg Pwr 3.0 Wire-to-Board Connector, Single Row Vertical Header, TH
Pre-order
990,000
Factory Lead Time:15 weeks
1,980+$1.8019
- +
Ext. Price(USD):$3,567.76
MOQ:1,980
Mult:1,980
SPQ:1,980
JST
ECAD Model:
Wire-to-Board Connector SKT 23 POS 1mm IDT ST Cable Mount Box
Pre-order
21,600
Factory Lead Time:18-22 weeks
26+
2,160+$0.3331
6,480+$0.3275
10,800+$0.3192
- +
Ext. Price(USD):$719.49
MOQ:2,160
Mult:2,160
SPQ:2,160
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.2343
- +
Ext. Price(USD):$1,481.16
MOQ:1,200
Mult:1,200
SPQ:400
Wire-to-Board HDR 6 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.538
- +
Ext. Price(USD):$968.40
MOQ:1,800
Mult:1,800
SPQ:600
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.633
- +
Ext. Price(USD):$1,469.70
MOQ:900
Mult:900
SPQ:300
Wire-to-Board HDR, 22 Pos, 4.2mm Pitch, Solder RA Side Entry, TH, Tray
Pre-order
360,000
Factory Lead Time:15 weeks
720+$1.3144
- +
Ext. Price(USD):$946.36
MOQ:720
Mult:720
SPQ:240
Molex
ECAD Model:
Pre-order
180,000
Factory Lead Time:22-26 weeks
1,800+$1.8875
4,000+$1.6375
10,000+$1.6125
- +
Ext. Price(USD):$3,397.50
MOQ:1,800
Mult:1,800
Amphenol
Package:SMD,P=0.8mm
ECAD Model:
Pre-order
450,000
Factory Lead Time:8 weeks
900+$3.4383
- +
Ext. Price(USD):$3,094.47
MOQ:900
Mult:900
SPQ:900
High Power DIP Header Connector
Pre-order
4,050,000
Factory Lead Time:15 weeks
8,100+$1.5842
- +
Ext. Price(USD):$12,832.02
MOQ:8,100
Mult:8,100
SPQ:2,700
Wire-to-Board Connector, Receptacle, 6 Pos, 5mm Pitch, Solder RA Side Entry, TH
Available Stock
34
Estimated Ship Time:7-12 working days
1+$30.1499
10+$29.5568
25+$21.7475
- +
Ext. Price(USD):$241.19
MOQ:8
Mult:1
SPQ:1
Wire-to-Board HDR 2 Pos 4.2mm Solder RA Side Entry TH T/R
Pre-order
1,200,000
Factory Lead Time:15 weeks
2,400+$0.4126
- +
Ext. Price(USD):$990.24
MOQ:2,400
Mult:2,400
SPQ:1,200
Connectors, 2.5mm Pitch, Disconnectable, Crimp Style
Available Stock
197
Estimated Ship Time:6-7 working days
20+$0.1144
- +
Ext. Price(USD):$2.28
MOQ:20
Mult:20
JST
ECAD Model:
IDC Connector HDR 5 POS 2.5mm IDT ST Thru-Hole Box
Pre-order
90,000
Factory Lead Time:18-22 weeks
26+
9,000+$0.2939
27,000+$0.2889
45,000+$0.2816
- +
Ext. Price(USD):$2,645.10
MOQ:9,000
Mult:9,000
SPQ:9,000
Molex
Package:SMD,P=1.5mm
ECAD Model:
1.50mm Pitch CLIK Mate Wire-to-Board PCB Receptacle, Dual Row, Surface Mount, Vertical, 0.76μm Gold Plating, 8 Circuits, Black
Pre-order
270,000
Factory Lead Time:22-26 weeks
2,700+$3.5375
8,100+$3.1
20,250+$3.0375
- +
Ext. Price(USD):$9,551.25
MOQ:2,700
Mult:2,700
Molex
ECAD Model:
Shrouded Header HDR 8 POS 2mm Solder ST Thru-Hole Tube
Pre-order
43,500
Factory Lead Time:22-26 weeks
435+$2.95
870+$2.8
- +
Ext. Price(USD):$1,283.25
MOQ:435
Mult:435
SPQ:435
Wire-to-Board Header, 24 POS, 4.2mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$8.6176
- +
Ext. Price(USD):$11,633.76
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.4258
- +
Ext. Price(USD):$1,283.22
MOQ:900
Mult:300
SPQ:300
25 / PageGoto