Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Pre-order
210,000
Factory Lead Time:15 weeks
420+$14.9894
- +
Ext. Price(USD):$6,295.54
MOQ:420
Mult:420
SPQ:210
Wire-to-Board HDR 2 Pos 4.2mm Solder RA Side Entry TH T/R
Pre-order
1,200,000
Factory Lead Time:15 weeks
2,400+$0.8704
- +
Ext. Price(USD):$2,088.96
MOQ:2,400
Mult:2,400
SPQ:1,200
Wire-to-Board Header, 20 Pos, 4.2mm Pitch, Solder, Straight Top Entry Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.525
- +
Ext. Price(USD):$1,372.50
MOQ:900
Mult:900
SPQ:300
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) M 8 POS 2mm Solder RA Side Entry Thru-Hole Tube
Pre-order
4,200,000
Factory Lead Time:22-26 weeks
42,000+$0.6625
120,000+$0.5875
300,000+$0.575
- +
Ext. Price(USD):$27,825.00
MOQ:42,000
Mult:42,000
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$4.6065
- +
Ext. Price(USD):$5,527.80
MOQ:1,200
Mult:1,200
SPQ:400
Molex
ECAD Model:
CONN HDR, Right Angle, Solder
Pre-order
60,000
Factory Lead Time:22-26 weeks
600+$0.9125
1,200+$0.7875
2,400+$0.725
4,000+$0.6625
8,000+$0.65
- +
Ext. Price(USD):$547.50
MOQ:600
Mult:600
SPQ:600
Molex
ECAD Model:
CONN, 4-Pin, 2x2, 100mil Pitch, Vertical Header w/ Pegs, SMT
Pre-order
51,000
Factory Lead Time:22-26 weeks
510+$0.2188
1,020+$0.2013
2,040+$0.1913
2,500+$0.1663
5,000+$0.1538
- +
Ext. Price(USD):$111.58
MOQ:510
Mult:510
SPQ:510
JST
ECAD Model:
IDC Connector RCP 6 POS 2.5mm IDT RA Cable Mount Box
Pre-order
60,000
Factory Lead Time:18-22 weeks
26+
6,000+$0.2263
18,000+$0.2226
30,000+$0.2169
- +
Ext. Price(USD):$1,357.80
MOQ:6,000
Mult:6,000
SPQ:6,000
Molex
ECAD Model:
Pre-order
600,000
Factory Lead Time:22-26 weeks
6,000+$0.325
12,000+$0.3063
- +
Ext. Price(USD):$1,950.00
MOQ:6,000
Mult:6,000
SPQ:6,000
Conn Wire to Board SKT 6Power/24Signal POS 5.5mm/2.54mm/7.5mm Solder ST Top Entry Thru-Hole EXTreme Ten60Power™ Bulk
Pre-order
100
Factory Lead Time:8-10 weeks
10+$15.7792
25+$13.6801
8,526+$4.9364
18,459+$4.519
- +
Ext. Price(USD):$252.46
MOQ:16
Mult:1
SPQ:1
Wire-to-Board Header, 24 POS, 4.2mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.5564
- +
Ext. Price(USD):$2,101.14
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$6.6851
- +
Ext. Price(USD):$6,016.59
MOQ:900
Mult:900
SPQ:300
Wire-to-Board HDR 10 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.2465
- +
Ext. Price(USD):$2,243.70
MOQ:1,800
Mult:1,800
SPQ:600
Pre-order
24,000
Factory Lead Time:22-26 weeks
240+$19.3625
504+$13.1
1,008+$9.675
5,004+$9.075
10,008+$8.6375
- +
Ext. Price(USD):$4,647.00
MOQ:240
Mult:240
SPQ:240
JST
ECAD Model:
Disconnectable Crimp Style Connectors
Pre-order
50,000
Factory Lead Time:18-22 weeks
26+
5,000+$0.0471
15,000+$0.0464
25,000+$0.0451
- +
Ext. Price(USD):$235.50
MOQ:5,000
Mult:5,000
SPQ:5,000
Pre-order
742,500
Factory Lead Time:15 weeks
1,485+$1.1978
- +
Ext. Price(USD):$1,778.73
MOQ:1,485
Mult:495
SPQ:495
Wire-to-Board Connector HDR 10 Pos 3mm Solder RA Side Entry TH Tray
Pre-order
472,500
Factory Lead Time:15 weeks
945+$0.5763
- +
Ext. Price(USD):$1,089.20
MOQ:1,890
Mult:945
SPQ:945
Minitek Wire-to-Board Connector Header, Dual Row, Right Angle, Through Hole
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.5912
- +
Ext. Price(USD):$1,432.08
MOQ:900
Mult:900
SPQ:450
Conn Unshrouded Header HDR 16 POS 2.54mm Solder ST Top Entry SMD BergStik® T/R
Pre-order
5,000
Factory Lead Time:10-16 weeks
24+
500+$1.1944
750+$1.1633
- +
Ext. Price(USD):$597.20
MOQ:500
Mult:250
SPQ:250
Wire-to-Board HDR, 4 Pos, 4.2mm Pitch, Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.4345
- +
Ext. Price(USD):$1,936.57
MOQ:1,350
Mult:1,350
SPQ:450
Minitek Reg Pwr 3.0 Wire-to-Board Connector, Single Row Vertical Header, TH
Pre-order
3,690,000
Factory Lead Time:15 weeks
7,380+$0.5658
- +
Ext. Price(USD):$4,175.60
MOQ:7,380
Mult:7,380
SPQ:7,380
Wire-to-Board Header 4 POS 3mm Solder Right Angle Side Entry Thru-Hole T/R
Pre-order
1,800,000
Factory Lead Time:15 weeks
3,600+$0.3796
- +
Ext. Price(USD):$1,366.56
MOQ:3,600
Mult:3,600
SPQ:1,200
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.4066
- +
Ext. Price(USD):$1,265.94
MOQ:900
Mult:900
SPQ:300
Available Stock
2,455
Estimated Ship Time:14-17 working days
100+$0.4813
500+$0.4699
1,000+$0.4441
2,000+$0.4224
4,000+$0.42
- +
Ext. Price(USD):$50.05
MOQ:104
Mult:1
SPQ:1
Wire-to-Board HDR 14-Pin 4.2mm Solder RA Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$4.993
- +
Ext. Price(USD):$6,740.55
MOQ:1,350
Mult:450
SPQ:450
25 / PageGoto