MOSFETs

Results:

Find N-channel and P-channel devices for power switching, load control, power conversion and signal amplification. Compare voltage, current, RDS(on), gate charge and package options alongside stock, pricing and datasheets to narrow down suitable parts.

For part selection, start with the switch position and the gate voltage available in the circuit. N-channel devices are commonly used for efficient low-side switching and can operate in high-side stages with an appropriate gate driver. P-channel devices can simplify high-side load control, although their on-resistance may be higher than that of comparable N-channel parts.

For a closer comparison of switch position, drive requirements and conduction trade-offs, see our guide to choosing between N-channel and P-channel MOSFETs.

Parameters to Compare

  • Drain-source voltage: Select a VDS rating above the highest operating voltage, including supply variation and switching transients.
  • Drain current and SOA: Verify continuous current, pulsed current and safe operating area under the intended PCB and cooling conditions.
  • On-resistance: Compare RDS(on) at the available gate voltage and expected junction temperature.
  • Gate drive: VGS(th) only marks the beginning of conduction. Confirm full turn-on from the guaranteed RDS(on) at the intended VGS. Use the gate driver selection guide when comparing drive voltage, source and sink current, timing or isolation requirements.
  • Gate charge: Review total gate charge and switching time when driver capability and switching losses matter.
  • Package and thermal performance: Match the package, PCB copper area and heatsinking to expected power dissipation.

Common Applications

  • Power supplies and DC-DC converters: Balance conduction loss, switching loss and gate-driver requirements.
  • Motor, relay and solenoid control: Account for startup current and inductive voltage spikes, with suitable flyback, snubber or clamp protection. For a practical circuit walkthrough, see how to use a MOSFET as a switch.
  • Battery and load switching: Match the channel type and drive circuit to the required low-side or high-side configuration.
  • LED and lighting control: Check current, switching frequency, dimming and thermal requirements.
  • Analog and audio stages: Consider transconductance, capacitance, noise, linearity and thermal stability around the intended bias point.

Complete the Switching Circuit

The selected device must work with its drive, protection and thermal components. Depending on the application, the circuit may need a gate driver, gate resistor, pull-down or pull-up resistor, current sensing, transient suppression and additional cooling.

Read More
MOSFETsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
MATSUKI
Package:TO-252-2
ECAD Model:
114W(Tc) 20V 60V@260uA 94nC 1 P-Ch 60V 17mΩ@10V,17A 61A 710pF TO-252-2 SMD
In Stock10,226
2612+
1+$0.4103
10+$0.3182
30+$0.2791
100+$0.2303
500+$0.1982
- +
Ext. Price(USD):$0.41
MOQ:1
Mult:1
SPQ:2,500
MATSUKI
Package:SOT-23
ECAD Model:
In Stock2,060
22+
1+$0.0627
200+$0.0406
1,500+$0.0353
3,000+$0.031
- +
Ext. Price(USD):$0.06
MOQ:1
Mult:1
SPQ:3,000
MATSUKI
Package:TO-252-2
ECAD Model:
39W(Tc) 3V@ 250uA 30V 32mΩ@ 10V,18A 27.6A TO-252-2
In Stock2,973
24+
1+$0.1519
100+$0.1168
1,250+$0.0988
2,500+$0.0917
- +
Ext. Price(USD):$0.15
MOQ:1
Mult:1
SPQ:2,500
MATSUKI
Package:TO-252-2
ECAD Model:
25W(Tc) 3V@ 250uA 40V 45mΩ@ 10V,12A 18.6A TO-252-2
In Stock50
22+
1+$0.1391
100+$0.1071
1,250+$0.0907
2,500+$0.084
- +
Ext. Price(USD):$0.13
MOQ:1
Mult:1
SPQ:2,500
MATSUKI
Package:TO-252-2
ECAD Model:
39.1W(Tc) 3V@ 250uA 60V 78mΩ@ 10V,20A 17.7A TO-252-2
In Stock3,369
26+
1+$0.1519
100+$0.1168
1,250+$0.0988
2,500+$0.0917
- +
Ext. Price(USD):$0.15
MOQ:1
Mult:1
SPQ:2,500
MATSUKI
Package:SOT-23
ECAD Model:
1.4W 12V 1.3V@ 250uA 9nC 1individualPChannel 30V 68mΩ@ 10V,4.2A 3.6A 710pF SOT-23 SMD mount
In Stock96
25+
1+$0.061
200+$0.0394
1,500+$0.0342
3,000+$0.0303
- +
Ext. Price(USD):$0.06
MOQ:1
Mult:1
SPQ:3,000
MATSUKI
Package:TO-252-2
ECAD Model:
N-Ch MOSFET 20V 100V 100mΩ@10V 8A 14.7A 24nC 710pF TO-252-2 SMD 6.3mm W
In Stock5,025
26+
1+$0.1519
100+$0.1168
1,250+$0.0988
2,500+$0.0917
- +
Ext. Price(USD):$0.15
MOQ:1
Mult:1
SPQ:2,500
MATSUKI
Package:TO-220
ECAD Model:
27nC@ 4.5V 8mΩ@ 10V,40A 93A TO-220
Available Stock
30,000
Estimated Ship Time:5-7 working days
20+
3,000+$0.3177
6,000+$0.3096
9,000+$0.3043
- +
Ext. Price(USD):$953.10
MOQ:3,000
Mult:3,000
MATSUKI
Package:SOT-23
ECAD Model:
1.4W 3V@ 250uA 30V 50mΩ@ 10V,4.1A 4.3A SOT-23 SMD mount
Available Stock
102,000
Estimated Ship Time:5-7 working days
26+
3,000+$0.0332
6,000+$0.0324
9,000+$0.0318
- +
Ext. Price(USD):$99.60
MOQ:3,000
Mult:3,000
MATSUKI
Package:SOT-23
ECAD Model:
Available Stock
171,000
Estimated Ship Time:5-7 working days
26+
3,000+$0.0095
6,000+$0.0092
9,000+$0.0091
- +
Ext. Price(USD):$28.50
MOQ:3,000
Mult:3,000
25 / PageGoto