MOSFETs

Results:

Find N-channel and P-channel devices for power switching, load control, power conversion and signal amplification. Compare voltage, current, RDS(on), gate charge and package options alongside stock, pricing and datasheets to narrow down suitable parts.

For part selection, start with the switch position and the gate voltage available in the circuit. N-channel devices are commonly used for efficient low-side switching and can operate in high-side stages with an appropriate gate driver. P-channel devices can simplify high-side load control, although their on-resistance may be higher than that of comparable N-channel parts.

For a closer comparison of switch position, drive requirements and conduction trade-offs, see our guide to choosing between N-channel and P-channel MOSFETs.

Parameters to Compare

  • Drain-source voltage: Select a VDS rating above the highest operating voltage, including supply variation and switching transients.
  • Drain current and SOA: Verify continuous current, pulsed current and safe operating area under the intended PCB and cooling conditions.
  • On-resistance: Compare RDS(on) at the available gate voltage and expected junction temperature.
  • Gate drive: VGS(th) only marks the beginning of conduction. Confirm full turn-on from the guaranteed RDS(on) at the intended VGS. Use the gate driver selection guide when comparing drive voltage, source and sink current, timing or isolation requirements.
  • Gate charge: Review total gate charge and switching time when driver capability and switching losses matter.
  • Package and thermal performance: Match the package, PCB copper area and heatsinking to expected power dissipation.

Common Applications

  • Power supplies and DC-DC converters: Balance conduction loss, switching loss and gate-driver requirements.
  • Motor, relay and solenoid control: Account for startup current and inductive voltage spikes, with suitable flyback, snubber or clamp protection. For a practical circuit walkthrough, see how to use a MOSFET as a switch.
  • Battery and load switching: Match the channel type and drive circuit to the required low-side or high-side configuration.
  • LED and lighting control: Check current, switching frequency, dimming and thermal requirements.
  • Analog and audio stages: Consider transconductance, capacitance, noise, linearity and thermal stability around the intended bias point.

Complete the Switching Circuit

The selected device must work with its drive, protection and thermal components. Depending on the application, the circuit may need a gate driver, gate resistor, pull-down or pull-up resistor, current sensing, transient suppression and additional cooling.

Read More
MOSFETsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Available Stock
9,990
Estimated Ship Time:5-7 working days
22+
10+$0.7185
200+$0.707
1,000+$0.6898
5,000+$0.6783
- +
Ext. Price(USD):$7.18
MOQ:10
Mult:1
SPQ:600
2.5W 30V 50nC@10V 900V 1.4Ω@10V 1.7nF@25V
Available Stock
6,000
Estimated Ship Time:5-7 working days
23+
10+$0.8236
200+$0.8104
1,000+$0.7906
5,000+$0.7774
- +
Ext. Price(USD):$8.23
MOQ:10
Mult:1
SPQ:600
2.5W 30V 60nC@10V 900V 1Ω@10V 2.3nF@25V
Available Stock
10,000
Estimated Ship Time:5-7 working days
22+
10+$1.407
200+$1.3845
1,000+$1.3507
5,000+$1.3282
- +
Ext. Price(USD):$14.07
MOQ:10
Mult:1
SPQ:600
Fuji Electric
Package:TO-3P
ECAD Model:
2.5W 30V 3V 11nC@10V 2 N-Ch 500V 245mΩ@10V 23A 3.5nF@25V TO-3P
Available Stock
4,700
Estimated Ship Time:5-7 working days
26+
10+$1.407
200+$1.3845
1,000+$1.3507
5,000+$1.3282
- +
Ext. Price(USD):$14.07
MOQ:10
Mult:1
SPQ:600
Fuji Electric
Package:TO-247
ECAD Model:
2.5W 30V 3.5V 125nC@10V 1 Ch N-Ch 600V 70mΩ@10V 47A 4nF@10V TO-247 TH 15.9mm × 5.03mm × 20.95mm
Available Stock
1,000
Estimated Ship Time:5-7 working days
23+
10+$2.8853
200+$2.8391
1,000+$2.7699
5,000+$2.7237
- +
Ext. Price(USD):$28.85
MOQ:10
Mult:1
SPQ:600
2.5W 30V 77nC@10V 500V 310mΩ@10V 2.65nF@25V
Available Stock
70
Estimated Ship Time:14-17 working days
10+$3.5072
30+$2.9058
500+$2.1628
1,000+$2.156
- +
Ext. Price(USD):$52.60
MOQ:15
Mult:1
SPQ:1
MOSFET, 2.5W, 30V, 130nC@10V, 500V, 190mΩ@10V, 4.4nF@25V
Available Stock
1,800
Estimated Ship Time:5-7 working days
26+
10+$1.5571
200+$1.5322
1,000+$1.4948
5,000+$1.4699
- +
Ext. Price(USD):$15.57
MOQ:10
Mult:1
SPQ:600
Fuji Electric
Package:TO-247
ECAD Model:
N-Ch MOSFET, 600V, 20A, 190mΩ@10V, 48nC@10V, 1.47nF@10V, 30V/3.5V, 2.5W, TO-247, TH, 15.9mm×5.03mm×20.95mm
Available Stock
4,800
Estimated Ship Time:5-7 working days
22+
10+$1.5214
200+$1.4971
1,000+$1.4606
5,000+$1.4362
- +
Ext. Price(USD):$15.21
MOQ:10
Mult:1
SPQ:600
Ferrite Bead, 30mΩ@10V, 20V, 120V
Available Stock
401
Estimated Ship Time:14-17 working days
5+$6.8514
10+$5.9417
100+$4.5616
200+$4.5201
- +
Ext. Price(USD):$54.81
MOQ:8
Mult:1
SPQ:1
25 / PageGoto