Film Capacitors

Results:
Film Capacitors are a type of capacitor that uses a thin dielectric film as the insulating material between conductive plates. They are known for their high reliability, stability, and low equivalent series resistance (ESR), making them suitable for a variety of applications in electronic circuits.

Definition:
A film capacitor is an electronic component that stores electrical energy in an electric field. It consists of two conductive plates separated by a thin layer of insulating film. The film acts as a dielectric, allowing the capacitor to hold a charge when a voltage is applied across its terminals.

Functions:
1. Energy Storage: Film capacitors can store and release energy, which is useful in power supply circuits and for smoothing voltage fluctuations.
2. Signal Coupling: They are used to pass AC signals while blocking DC components, which is essential in audio and radio frequency (RF) circuits.
3. Noise Filtering: Due to their low ESR, film capacitors are effective at filtering out high-frequency noise in power supplies and signal paths.
4. Timing and Oscillation: In conjunction with resistors, they can be used to create timing circuits and oscillators.

Applications:
1. Audio Equipment: In amplifiers and speakers for signal coupling and filtering.
2. Power Supplies: For smoothing and filtering in DC-DC converters and power factor correction circuits.
3. Automotive Electronics: In ignition systems and engine control units for reliable performance under harsh conditions.
4. Industrial Controls: For motor drives and sensor circuits where stability and reliability are critical.
5. Telecommunications: In base stations and networking equipment for signal integrity and power management.

Selection Criteria:
1. Capacitance Value: Choose the appropriate capacitance for the required energy storage or filtering needs.
2. Voltage Rating: Ensure the capacitor can handle the maximum voltage expected in the circuit.
3. Temperature Range: Select a capacitor with a suitable temperature range for the operating environment.
4. Size and Form Factor: Consider the physical dimensions and mounting requirements of the capacitor.
5. Lifetime and Reliability: Opt for capacitors with a long service life and proven reliability, especially for critical applications.
6. ESR and ESL: Low ESR and equivalent series inductance (ESL) are desirable for applications requiring high-frequency performance.

When selecting a film capacitor, it's also important to consider the type of film material used, as different materials (such as polyester, polypropylene, or metallized film) have different characteristics that may affect performance in specific applications.
Please refer to the product rule book for details.
Read More
Film CapacitorsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
1.2μF ±5% Polypropylene 630V TH 25.3mm × 9.2mm × 21.3mm
Available Stock
906
Estimated Ship Time:6-13 working days
1+$2.1735
10+$1.495
1,000+$0.7668
10,000+$0.7495
- +
Ext. Price(USD):$15.21
MOQ:7
Mult:1
SPQ:1
Cornell Dubilier
Package:Plugins
ECAD Model:
Capacitor 68nF ±10% Polypropylene 1.6kV 460V 6mΩ TH 34mm L
Available Stock
500
Estimated Ship Time:7-9 working days
22+
50+$2.607
100+$2.409
- +
Ext. Price(USD):$130.35
MOQ:50
Mult:1
SPQ:1
KEMET
ECAD Model:
12nF ±5% Polypropylene Metallized 15mm Pitch 1kV 250V TH, 18mm × 5mm × 11.1mm
Available Stock
472
Estimated Ship Time:9-14 working days
1+$1.2093
10+$0.7558
3,000+$0.3026
5,000+$0.2915
- +
Ext. Price(USD):$150.24
MOQ:345
Mult:1
SPQ:1
150nF ±20% Polypropylene Metallized, 15mm Pitch, 800V, 330V, TH, 17.5mm × 8.5mm × 15mm
Available Stock
4,550
Estimated Ship Time:9-14 working days
10+$1.2884
50+$1.0342
100+$0.9559
- +
Ext. Price(USD):$27.05
MOQ:21
Mult:1
SPQ:1
Film Capacitor, TH, 22nF ±20% Polypropylene Metallized 630V 310V 10mm Pitch 12.5mm × 4mm × 10mm
Available Stock
1,227
Estimated Ship Time:6-13 working days
10+$1.1236
100+$0.7821
5,000+$0.5098
10,000+$0.473
- +
Ext. Price(USD):$14.60
MOQ:13
Mult:1
SPQ:1
1.5μF ±10% polypropylene,Metallization 27.5mm 310V Through hole mounting 31.5mm(Length)*25mm(height)
Available Stock
194
Estimated Ship Time:7-9 working days
24+
141+$0.781
750+$0.781
- +
Ext. Price(USD):$110.12
MOQ:141
Mult:1
SPQ:1
TDK
ECAD Model:
33nF ±5% Polyester 5mm Pitch 100V 63V TH 7.2mm × 2.5mm × 6.5mm
Available Stock
6,553
Estimated Ship Time:6-13 working days
100+$0.1536
500+$0.1162
8,400+$0.0791
22,400+$0.0768
- +
Ext. Price(USD):$26.57
MOQ:173
Mult:1
SPQ:1
100nF ±5% Polypropylene 15mm Pitch 400V 250V TH 18mm × 6.5mm × 12.5mm
Available Stock
6,955
Estimated Ship Time:5-10 working days
1,000+$0.6019
2,000+$0.5868
4,000+$0.5778
- +
Ext. Price(USD):$601.90
MOQ:1,000
Mult:1,000
KEMET
ECAD Model:
33nF ±5% Polypropylene Metallized 22.5mm Pitch 1.5kV 650V 58mΩ TH 26.5mm × 6mm × 15.1mm
Available Stock
307
Estimated Ship Time:6-12 working days
10+$0.8738
50+$0.8369
1,000+$0.6523
2,000+$0.64
- +
Ext. Price(USD):$34.95
MOQ:40
Mult:10
100nF ±10% polypropylene 10mm 450V Through hole mounting 13mm*5.1mm*14.3mm
Available Stock
100
Estimated Ship Time:5-10 working days
10+$0.3722
130+$0.3658
- +
Ext. Price(USD):$7.44
MOQ:20
Mult:10
Polypropylene Capacitor 47nF ±5% 5mm Pitch TH 6mm W × 6mm H
Available Stock
414
Estimated Ship Time:6-13 working days
10+$0.6732
100+$0.4405
500+$0.3537
1,000+$0.3254
2,000+$0.2599
- +
Ext. Price(USD):$26.92
MOQ:40
Mult:1
SPQ:1
Polyester Film Capacitor, 1μF ±10%, 100V/63V, Pitch 10mm, TH, 12mm × 6.7mm × 15mm
Available Stock
7,691
Estimated Ship Time:6-13 working days
10+$0.6659
100+$0.5533
2,000+$0.4201
5,000+$0.4072
- +
Ext. Price(USD):$14.64
MOQ:22
Mult:1
SPQ:1
KEMET
ECAD Model:
Paper Capacitor, 100nF ±10%, 275V, Pitch 20.3mm, TH, 7.6mm W × 7.6mm H
Available Stock
250
Estimated Ship Time:6-12 working days
1+$3.6277
25+$2.5908
2,500+$1.76
5,000+$1.7231
- +
Ext. Price(USD):$32.64
MOQ:9
Mult:1
Vishay
ECAD Model:
47nF ±10% polyester,Metallization 10mm 400V 220V Through hole mounting 12.5mm*5mm*11mm
Available Stock
200
Estimated Ship Time:5-10 working days
25+$0.5511
250+$0.5394
500+$0.5277
- +
Ext. Price(USD):$13.77
MOQ:25
Mult:25
Cornell Dubilier
Package:Plugins,D12xL34mm
ECAD Model:
22nF ±10% Polypropylene 1.6kV 460V 27mΩ Plug-in D12×L34mm TH 34mm L
Available Stock
61
Estimated Ship Time:9-14 working days
1+$5.2488
25+$3.3916
1,000+$2.5812
2,500+$2.48
- +
Ext. Price(USD):$26.24
MOQ:5
Mult:1
SPQ:1
KEMET
ECAD Model:
1μF ±5% PET Capacitor, 250V, 160V, TH, 26.5mm L × 6mm H
Available Stock
497
Estimated Ship Time:6-13 working days
10+$1.0104
100+$0.7981
2,500+$0.5492
5,000+$0.5277
- +
Ext. Price(USD):$27.28
MOQ:27
Mult:1
SPQ:1
Capacitor, 7.5nF ±3%, Polypropylene, TH, 15mm Pitch, 6mm W × 6mm H
Available Stock
94
Estimated Ship Time:9-14 working days
10+$0.8316
50+$0.6517
2,500+$0.4422
5,000+$0.4237
- +
Ext. Price(USD):$26.61
MOQ:32
Mult:1
SPQ:1
TDK
ECAD Model:
470nF ±10% polypropylene,Metallization 10mm 450V 160V Through hole mounting 13mm*6mm*14mm
Available Stock
100
Estimated Ship Time:5-10 working days
10+$0.7418
250+$0.7265
500+$0.7087
- +
Ext. Price(USD):$7.41
MOQ:10
Mult:10
TDK
ECAD Model:
Film Capacitor 3.3μF ±10% Polyester 10mm Pitch 63V 40V TH 13mm × 6mm × 12mm
Available Stock
4,090
Estimated Ship Time:6-13 working days
10+$1.752
50+$1.357
4,400+$0.9198
9,900+$0.8803
- +
Ext. Price(USD):$28.03
MOQ:16
Mult:1
SPQ:1
KEMET
ECAD Model:
220nF ±20% polypropylene,Metallization 27.5mm 1KV 300V Through hole mounting 32mm*13mm*22.1mm
Available Stock
864
Estimated Ship Time:9-14 working days
1+$4.1991
10+$2.3971
2,592+$1.4343
5,184+$1.3891
- +
Ext. Price(USD):$150.38
MOQ:77
Mult:1
SPQ:1
TDK
Package:Plugins
ECAD Model:
Film Capacitor, 1.5mF ±10%, Polypropylene, Metallized, 50mm Pitch, 900V, TH, Base Mount, Terminal Mount, Screw Mount, 116mm × 173mm × 181mm
Available Stock
18
Estimated Ship Time:6-13 working days
1+$219.6268
12+$198.3941
- +
Ext. Price(USD):$219.62
MOQ:1
Mult:1
SPQ:1
KEMET
ECAD Model:
220nF ±10% Polypropylene 22.5mm 1kV 440V TH 26.5mm(L) × 20mm(H)
Available Stock
720
Estimated Ship Time:9-14 working days
1+$2.9225
10+$1.6196
2,520+$0.9159
5,040+$0.8826
- +
Ext. Price(USD):$150.17
MOQ:116
Mult:1
SPQ:1
8μF ±5% Polypropylene 470V Wire Mount, Base Mount, Threaded Mount, Hinge Mount 35mm L × 60.5mm H
Available Stock
261
Estimated Ship Time:6-12 working days
1+$12.26
10+$8.7708
516+$6.6338
1,032+$6.4585
- +
Ext. Price(USD):$36.78
MOQ:3
Mult:1
KEMET
ECAD Model:
Capacitor, 63nF ±10% Polypropylene 15mm Pitch 630V 250V TH 5mm H
Available Stock
3,958
Estimated Ship Time:6-13 working days
10+$0.708
100+$0.4888
2,000+$0.2949
25,000+$0.2893
- +
Ext. Price(USD):$26.90
MOQ:38
Mult:1
SPQ:1
330nF ±10% Polypropylene Cap 1.5kV 650V 4.6mΩ Base Mount, Threaded Mount 42.5mm × 24.5mm × 27.5mm
Available Stock
7
Estimated Ship Time:9-14 working days
1+$12.844
- +
Ext. Price(USD):$38.53
MOQ:3
Mult:1
SPQ:1
25 / PageGoto