FFC/FPC Connectors

Results:

FFC/FPC connectors in this category are complete PCB-mounted assemblies that receive flat flexible cable or flexible printed circuit tails. Begin with the cable’s exposed conductor face, then match pitch, positions, mating thickness, entry direction and locking method before checking the PCB footprint.

Read the Mating Stack from Cable to Board

Actuator or Lock
FFC or FPC Tail
Exposed Conductor Surface
Connector Contact Beam
PCB Solder Joints and Hold-downs

A matching pitch does not guarantee a compatible connection. The cable conductors must face the connector’s contact beams, and the tail must fit within the specified mating-thickness range.

Match the Contact Face and Cable Entry

Top contact The exposed conductors face the upper contact area after the tail enters the connector.
Bottom contact The conductor surface faces the PCB side of the connector. Confirm the orientation from the series drawing.
Dual contact Contacts can engage either conductor orientation on supported designs, but tail thickness and layout still require verification.

Next, distinguish horizontal-entry connectors, where the tail approaches parallel to the PCB, from vertical-entry connectors, where it enters perpendicular to the board. If the required item is a separate housing, loose contact or accessory rather than a complete connector, return to FFC/FPC Connectors & Components to follow the appropriate product path.

Turn the Tail Drawing into Searchable Specifications

Pitch and positionsMatch the center-to-center conductor spacing and the number of conductive positions. Do not substitute the overall tail width for pitch.
Mating thicknessUse the finished thickness at the mating end, including any stiffener, rather than the nominal film thickness alone.
Exposed lengthConfirm that the exposed conductors reach the contact zone without placing the stiffener or insulation inside the electrical interface.
Pin-one orientationCompare the cable drawing, connector numbering and PCB footprint so the circuit order is not mirrored during assembly.

FFC and FPC describe different flexible interconnect constructions, but connector compatibility is established by the mating-tail dimensions and contact arrangement. For a broader comparison with board-to-board, wire-to-board and other PCB interfaces, see Printed Circuit Board Connectors Explained.

Fit the Lock into the Assembly Process

The locking mechanism affects insertion force, service access and the clearance required around the connector. ZIF and flip-lock designs allow the tail to enter before the actuator secures it; slider and back-lock mechanisms require access in a different direction. Non-ZIF versions rely on direct insertion and should be checked for the permitted mating cycles and insertion method.

  1. Confirm that the actuator can be opened after nearby components are installed.
  2. Check whether the cable can enter straight without twisting at the contact area.
  3. Compare the recommended PCB footprint, soldering method and hold-down arrangement.
  4. Use the selected series drawing to verify operating height and cable insertion depth.

Define the Insertion Envelope

Cable approach Actuator sweep Connector height First cable bend

Keep the first bend outside the connector’s mating and strain-sensitive area. Final clearances, bend limits and actuator operation must follow the drawing for the exact manufacturer series and part number.

Read More
FFC/FPC ConnectorsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
GYD
Package:SMD,P=0.5mm
ECAD Model:
Pitch 0.5mm 26-Pin Flip-Lock Dual-Side Contact Top/Bottom Mount H2.0mm Gold Plated Front Insert Rear Flip Top Connect Rear Lift
Available Stock
150,000
Estimated Ship Time:3-5 working days
25+
1,500+$0.059
3,000+$0.0585
4,500+$0.0571
- +
Ext. Price(USD):$88.50
MOQ:1,500
Mult:1,500
SPQ:1,500
GYD
Package:SMD,P=0.5mm
ECAD Model:
FPC Connector 2.0mm Pitch Flip-Up 7-Pin
Available Stock
200,000
Estimated Ship Time:3-5 working days
25+
2,000+$0.0312
4,000+$0.031
6,000+$0.0302
- +
Ext. Price(USD):$62.40
MOQ:2,000
Mult:2,000
SPQ:2,000
GYD
Package:SMD,P=0.5mm
ECAD Model:
Vertical Pitch 0.5mm H 2.0mm 24-Pin Pull-Out FPC Vertical (Interleaved Pins)
Available Stock
150,000
Estimated Ship Time:3-5 working days
25+
1,500+$0.0482
3,000+$0.0479
4,500+$0.0467
- +
Ext. Price(USD):$72.30
MOQ:1,500
Mult:1,500
SPQ:1,500
GYD
Package:SMD,P=0.3mm
ECAD Model:
Pitch 0.3mm 45-Pin Front Insert Rear Release Dual Contact Top/Bottom Mount Board Height 1mm
Available Stock
400,000
Estimated Ship Time:3-5 working days
25+
4,000+$0.1248
8,000+$0.1238
12,000+$0.1209
- +
Ext. Price(USD):$499.20
MOQ:4,000
Mult:4,000
SPQ:4,000
GYD
Package:SMD,P=0.5mm
ECAD Model:
Connector 0.5mm Pitch 50P Flip-Lock Dual Side Contact Board Height 2.0mm Gold Plated Front Insert Rear Flip
Available Stock
150,000
Estimated Ship Time:3-5 working days
25+
1,500+$0.1135
3,000+$0.1126
4,500+$0.1098
- +
Ext. Price(USD):$170.25
MOQ:1,500
Mult:1,500
SPQ:1,500
GYD
Package:SMD,P=0.5mm
ECAD Model:
Pull-Out Vertical Mount 30-Pin Tin Plated Grounding Strip Wide Cover Version
Available Stock
150,000
Estimated Ship Time:3-5 working days
25+
1,500+$0.0769
3,000+$0.0763
4,500+$0.0745
- +
Ext. Price(USD):$115.35
MOQ:1,500
Mult:1,500
SPQ:1,500
GYD
Package:SMD,P=0.5mm
ECAD Model:
Connector, 0.5mm Pitch, 36-Pin, Flip-Lock, Dual Side Contact/Top & Bottom Mount, H2.0mm, Gold Plated, Front Insert Rear Flip
Available Stock
150,000
Estimated Ship Time:3-5 working days
25+
1,500+$0.076
3,000+$0.0754
4,500+$0.0736
- +
Ext. Price(USD):$114.00
MOQ:1,500
Mult:1,500
SPQ:1,500
GYD
Package:SMD,P=0.5mm
ECAD Model:
FPC Connector PH0.5-12PIN H2.0mm Snap Cover Bottom/Front Contact Pitch:0.5mm 12P SMD Bottom Contact Height:2.0mm
Available Stock
200,000
Estimated Ship Time:3-5 working days
25+
2,000+$0.0255
4,000+$0.0253
6,000+$0.0247
- +
Ext. Price(USD):$51.00
MOQ:2,000
Mult:2,000
SPQ:2,000
GYD
Package:SMD,P=0.5mm
ECAD Model:
Vertical 0.5mm Pitch 2.0mm H 14-Pin Pull-Out FPC Vertical (Staggered Pins)
Available Stock
150,000
Estimated Ship Time:3-5 working days
25+
1,500+$0.0426
3,000+$0.0422
4,500+$0.0412
- +
Ext. Price(USD):$63.90
MOQ:1,500
Mult:1,500
SPQ:1,500
GYD
Package:SMD,P=0.5mm
ECAD Model:
Latching FPC Connector PH0.5-14PIN H2.0mm Flip Top Bottom/Front Contact Pitch:0.5mm 14P SMD Bottom Contact Height:2.0mm
Available Stock
200,000
Estimated Ship Time:3-5 working days
25+
2,000+$0.0284
4,000+$0.0281
6,000+$0.0274
- +
Ext. Price(USD):$56.80
MOQ:2,000
Mult:2,000
SPQ:2,000
GYD
Package:SMD,P=0.5mm
ECAD Model:
FPC Connector 2.0mm Pitch Front Flip 26-Pin
Available Stock
200,000
Estimated Ship Time:3-5 working days
25+
2,000+$0.0369
4,000+$0.0365
6,000+$0.0358
- +
Ext. Price(USD):$73.80
MOQ:2,000
Mult:2,000
SPQ:2,000
GYD
Package:SMD,P=0.3mm
ECAD Model:
Pitch 0.3mm 31-Pin Front Insert Rear Lift Dual Side Contact Top/Bottom Mount H1mm
Available Stock
400,000
Estimated Ship Time:3-5 working days
25+
4,000+$0.1021
8,000+$0.1013
12,000+$0.0988
- +
Ext. Price(USD):$408.40
MOQ:4,000
Mult:4,000
SPQ:4,000
GYD
Package:SMD,P=0.5mm
ECAD Model:
Pull-Out Vertical Mount 20-Pin Tin Plated Grounding Plate Wide Cover Version
Available Stock
150,000
Estimated Ship Time:3-5 working days
25+
1,500+$0.0513
3,000+$0.0509
4,500+$0.0496
- +
Ext. Price(USD):$76.95
MOQ:1,500
Mult:1,500
SPQ:1,500
GYD
Package:SMD,P=0.5mm
ECAD Model:
Latch FPC Connector PH0.5-30PIN H2.0MM Flip Top Bottom/Front Contact Pitch 0.5mm 30P SMD Bottom Contact H=2.0mm
Available Stock
200,000
Estimated Ship Time:7-10 working days
25+
2,000+$0.0397
4,000+$0.0394
6,000+$0.0384
- +
Ext. Price(USD):$79.40
MOQ:2,000
Mult:2,000
SPQ:2,000
GYD
Package:SMD,P=0.5mm
ECAD Model:
Vertical 0.5mm Pitch 2.0mm H 18-Pin Pull-Out FPC Connector Vertical (Staggered Pins)
Available Stock
150,000
Estimated Ship Time:3-5 working days
25+
1,500+$0.0426
3,000+$0.0422
4,500+$0.0412
- +
Ext. Price(USD):$63.90
MOQ:1,500
Mult:1,500
SPQ:1,500
GYD
Package:SMD,P=0.5mm
ECAD Model:
Vertical FPC Connector, 0.5mm Pitch, 2.0mm H, 32-Pin, Pull-Type, Vertical (Staggered Pins)
Available Stock
150,000
Estimated Ship Time:3-5 working days
25+
1,500+$0.0851
3,000+$0.0844
4,500+$0.0824
- +
Ext. Price(USD):$127.65
MOQ:1,500
Mult:1,500
SPQ:1,500
GYD
Package:SMD,P=0.5mm
ECAD Model:
Vertical FPC Connector, 0.5mm Pitch, 2.0mm H, 20-Pin, Pull-Pull, Vertical (Staggered Pins)
Available Stock
150,000
Estimated Ship Time:3-5 working days
25+
1,500+$0.0426
3,000+$0.0422
4,500+$0.0412
- +
Ext. Price(USD):$63.90
MOQ:1,500
Mult:1,500
SPQ:1,500
GYD
Package:SMD,P=0.5mm
ECAD Model:
Latching FPC Connector PH0.5-20PIN H1.5MM Flip Top Bottom/Front Contact, 0.5mm Pitch, 20-Pin, SMD, 1.5mm H
Available Stock
400,000
Estimated Ship Time:3-5 working days
25+
4,000+$0.0341
8,000+$0.0338
12,000+$0.0329
- +
Ext. Price(USD):$136.40
MOQ:4,000
Mult:4,000
SPQ:4,000
GYD
Package:SMD,P=0.5mm
ECAD Model:
Vertical 0.5mm Pitch 2.0mm H 16-Pin Pull-out FPC Connector, Interleaved Pins, SMD
Available Stock
150,000
Estimated Ship Time:3-5 working days
25+
1,500+$0.0426
3,000+$0.0422
4,500+$0.0412
- +
Ext. Price(USD):$63.90
MOQ:1,500
Mult:1,500
SPQ:1,500
GYD
Package:SMD,P=0.5mm
ECAD Model:
FPC Connector, Latch, PH0.5-26Pin, H1.5mm, Flip Top, Bottom/Front Contact, 0.5mm Pitch, SMD
Available Stock
400,000
Estimated Ship Time:3-5 working days
25+
4,000+$0.0369
8,000+$0.0365
12,000+$0.0357
- +
Ext. Price(USD):$147.60
MOQ:4,000
Mult:4,000
SPQ:4,000
GYD
Package:SMD,P=0.5mm
ECAD Model:
Latching FPC Connector PH0.5-10Pin H2.0mm Flip Top Bottom/Front Contact 0.5mm Pitch 10-Pin SMD 2.0mm H
Available Stock
200,000
Estimated Ship Time:3-5 working days
25+
2,000+$0.0255
4,000+$0.0253
6,000+$0.0247
- +
Ext. Price(USD):$51.00
MOQ:2,000
Mult:2,000
SPQ:2,000
GYD
Package:SMD,P=0.5mm
ECAD Model:
24-Pin Connector, 0.5mm Pitch, Hinged Cover, Gold Plated, Dual Side Contact, Top/Bottom Mount, 2.0mm Board Height
Available Stock
150,000
Estimated Ship Time:3-5 working days
25+
1,500+$0.0511
3,000+$0.0506
4,500+$0.0495
- +
Ext. Price(USD):$76.65
MOQ:1,500
Mult:1,500
SPQ:1,500
GYD
Package:SMD,P=0.5mm
ECAD Model:
FPC Connector 2.6mm Pitch, Rear Flip, 30-Pin
Available Stock
120,000
Estimated Ship Time:3-5 working days
25+
1,200+$0.1026
2,400+$0.1018
3,600+$0.0993
- +
Ext. Price(USD):$123.12
MOQ:1,200
Mult:1,200
SPQ:1,200
GYD
Package:SMD,P=0.5mm
ECAD Model:
FPC Connector 2.6mm Pitch 6-Pin Right Angle
Available Stock
120,000
Estimated Ship Time:3-5 working days
25+
1,200+$0.0641
2,400+$0.0636
3,600+$0.062
- +
Ext. Price(USD):$76.92
MOQ:1,200
Mult:1,200
SPQ:1,200
GYD
Package:SMD,P=0.5mm
ECAD Model:
Latching FPC Connector PH0.5-13PIN H1.5MM Flip Top Bottom/Front Mount, 0.5mm Pitch, 13-Pin, SMD, Bottom Contact, 1.5mm H
Available Stock
400,000
Estimated Ship Time:3-5 working days
25+
4,000+$0.0397
8,000+$0.0394
12,000+$0.0384
- +
Ext. Price(USD):$158.80
MOQ:4,000
Mult:4,000
SPQ:4,000
25 / PageGoto