Female Socket Headers

Results:

Female socket headers receive male pins to create removable PCB, module and board-to-board connections. Begin with the mating pin’s pitch, cross-section and contact arrangement, then define the acceptable insertion depth, socket height, entry direction and PCB termination needed for a mechanically secure and electrically stable connection.

Build the Mating Pair from the Male Pin

  1. Match the contact layout. Confirm pitch, number of positions, number of rows, row spacing and any intentionally unpopulated positions.
  2. Check the pin envelope. Compare the male pin’s width, thickness, shape and plating with the socket’s accepted contact range.
  3. Calculate contact engagement. The exposed male post must reach the female contact’s working area without exceeding its maximum insertion depth.
  4. Confirm polarization. Shrouds, keys, locating features and pin-one orientation must align across both halves.

Use Male Pin Headers to identify the corresponding exposed-pin connector before approving the female socket.

Check the Contact Engagement Window

Pitch compatibility does not confirm a complete match. The socket contact must grip the specified male pin and maintain enough overlap for the expected current, signal and mechanical conditions.

Drawing Field Required Comparison Mismatch Risk
Accepted pin size Male contact width, thickness and cross-section Loose contact or damaged spring beams
Minimum insertion depth Available male post length after accounting for body height Incomplete engagement or unstable resistance
Maximum insertion depth Post length entering the socket cavity Bottoming out or permanent contact deformation
Contact finish Female and male mating-surface plating Accelerated wear or inconsistent contact performance

Set the Installed Connection Height

Determine the finished assembly height from the female socket body, male header insulator, exposed post and actual mating overlap. For module sockets, confirm that the module seats at the intended height without contacting nearby components. For two-PCB assemblies, verify parallel-board spacing, component clearance and access for separation.

Height check: Female body height + exposed male structure − mating overlap = approximate installed connection height. Use the manufacturer drawings for the final tolerance calculation.

If controlled board spacing, elevated PCBs or pass-through contacts are the primary requirement, compare Board Stacking Connectors.

Select the Entry and PCB Side

Top-entry Choose for perpendicular mating above the PCB; check overhead clearance and extraction space.
Side-entry Choose for board-edge access or low-profile assemblies; confirm lateral keepout space.
Through-hole Match the finished-hole pattern, board thickness and solder-tail length.
Surface-mount Verify the recommended land pattern, coplanarity, locating features and reflow limits.

Unusual contact layouts, non-standard pin lengths or application-specific mating geometry may require Special Pin Headers. For additional guidance on header pitch, rows, mounting styles, pin dimensions and alternative-part evaluation, see the PCB Pin Header Selection Guide.

Record Both Halves in the BOM

Record the male and female part numbers together with pitch, positions, rows, accepted pin size, insertion-depth range, body height, installed height, entry direction, PCB mounting, plating and electrical ratings. Retaining both drawings and the approved mating combination helps prevent replacements that match the footprint but fail at the contact interface.

Read More
Female Socket HeadersResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
TE Connectivity
Package:SMD,P=2.54mm
ECAD Model:
Bottom/Top Entry Push-Pull Receptacle 2.54mm 12Pin 3A 800nm Gold Black SMD P=2.54mm 5.15mm H
Pre-order
60,000
Factory Lead Time:22-26 weeks
600+$3.55
1,200+$3.3625
- +
Ext. Price(USD):$2,130.00
MOQ:600
Mult:600
SPQ:600
Molex
ECAD Model:
Molex Receptacle, 2.54mm Pitch, 3-Pin, Single Row, KK 254 Series, Right Angle, TH
Pre-order
288,000
Factory Lead Time:22-26 weeks
2,880+$1.2375
5,000+$1.1375
- +
Ext. Price(USD):$3,564.00
MOQ:2,880
Mult:2,880
SPQ:2,880
Molex
ECAD Model:
2A SMD 16.3mm L × 8.5mm H
Pre-order
400,000
Factory Lead Time:22-26 weeks
4,000+$0.8125
8,000+$0.7
20,000+$0.6875
- +
Ext. Price(USD):$3,250.00
MOQ:4,000
Mult:4,000
Push-Pull Receptacle, 1.27mm, 2, 100-Pin, 760nm, Gold Plated, TH
Pre-order
5,600
Factory Lead Time:22-26 weeks
56+$115.125
105+$97.8
504+$86.65
1,001+$74.275
5,005+$66.85
- +
Ext. Price(USD):$6,447.00
MOQ:56
Mult:56
SPQ:56
Molex
ECAD Model:
Locking Receptacle, 3.96mm, 11-Pin, 5A, 1.52μm Tin, Board Mount, Edge Mount, TH, 11.4mm H
Pre-order
161,700
Factory Lead Time:22-26 weeks
1,617+$1.575
4,000+$1.375
10,000+$1.35
- +
Ext. Price(USD):$2,546.77
MOQ:1,617
Mult:1,617
TE Connectivity 2.54mm Pitch 16P Dual Row Header, Board Mount, Micro-MaTch Series, Right Angle, TH
Available Stock
17,500
Estimated Ship Time:7-9 working days
22+
2,500+$0.803
7,500+$0.737
10,000+$0.627
- +
Ext. Price(USD):$2,007.50
MOQ:2,500
Mult:2,500
SPQ:2,500
Bottom/Top Entry, Push-Pull, Receptacle, 2.54mm Pitch, 20-Pin, 3A, 760nm, Gold, Gray, SMD
Pre-order
11,040
Factory Lead Time:10-16 weeks
24+
1,104+$1.3777
1,472+$1.3418
- +
Ext. Price(USD):$1,520.98
MOQ:1,104
Mult:368
SPQ:368
Available Stock
1,054
Estimated Ship Time:6-7 working days
20+$0.5444
- +
Ext. Price(USD):$10.88
MOQ:20
Mult:20
Molex
ECAD Model:
Header, Latch Holder 5.03mm 3 12-Pin 5A Tin Black TH 24.8mm(L) × 18.6mm(H)
Pre-order
1,000,000
Factory Lead Time:22-26 weeks
10,000+$1.5625
20,000+$1.3625
50,000+$1.3375
- +
Ext. Price(USD):$15,625.00
MOQ:10,000
Mult:10,000
Push-Pull Receptacle 20-Pin 2mm Pitch 1A 760nm Gold TH, 20mm L × 4mm H
Pre-order
1,008,000
Factory Lead Time:22-26 weeks
10,080+$1.5
25,000+$1.3625
50,000+$1.2875
100,000+$1.2
- +
Ext. Price(USD):$15,120.00
MOQ:10,080
Mult:10,080
Molex
ECAD Model:
Push-Pull Receptacle, 2.54mm Pitch, 36-Pin, 2A, 380nm, Gold, Black, TH, 45.59mm L × 8.76mm H
Pre-order
480,000
Factory Lead Time:22-26 weeks
4,800+$3.4
12,000+$2.9875
30,000+$2.9125
- +
Ext. Price(USD):$16,320.00
MOQ:4,800
Mult:4,800
Molex
ECAD Model:
Push-Pull Receptacle, 2.54mm Pitch, 60-Pin, 3A, 1.02μm, Tin, Black, TH, 76.2mm L × 5.08mm H
Pre-order
87,500
Factory Lead Time:22-26 weeks
875+$4.2125
2,000+$3.6875
5,000+$3.6
- +
Ext. Price(USD):$3,685.93
MOQ:875
Mult:875
Molex
Package:SMD,P=2mm
ECAD Model:
Header, Push-Pull 2mm 2 12-Pin 1A 2.5μm Tin Black SMD P=2mm
Pre-order
187,500
Factory Lead Time:22-26 weeks
1,875+$1.05
3,750+$0.9375
- +
Ext. Price(USD):$1,968.75
MOQ:1,875
Mult:1,875
SPQ:1,875
Push-Pull Receptacle, 2mm, 2, 32-Pin, 2A, 760nm, Gold, Black, TH
Pre-order
10,800
Factory Lead Time:10-16 weeks
24+
1,080+$3.038
1,620+$2.9587
- +
Ext. Price(USD):$3,281.04
MOQ:1,080
Mult:540
SPQ:540
TH 3A
Available Stock
60
Estimated Ship Time:3-4 weeks
26+
12+$0.4224
3,780+$0.3801
- +
Ext. Price(USD):$5.06
MOQ:12
Mult:12
SPQ:12
Push-Pull Receptacle, 20 Pos, 2.54mm Pitch, 2A, 760nm, Gold, Black, TH
Pre-order
88,000
Factory Lead Time:22-26 weeks
880+$3.375
1,012+$3.05
50,006+$2.3
100,012+$2.1375
- +
Ext. Price(USD):$2,970.00
MOQ:880
Mult:880
Molex
Package:SMD,P=2mm
ECAD Model:
Push-Pull Receptacle, 2mm Pitch, 14-Pin, 1A, 380nm, Gold, Black, SMD, 14mm L × 6.1mm H
Pre-order
570,000
Factory Lead Time:22-26 weeks
5,700+$1.1625
- +
Ext. Price(USD):$6,626.25
MOQ:5,700
Mult:5,700
SPQ:5,700
TH Component, 2A
Pre-order
14,560
Factory Lead Time:10-16 weeks
24+
1,456+$1.9673
2,184+$1.9159
- +
Ext. Price(USD):$2,864.38
MOQ:1,456
Mult:728
SPQ:728
TE Connectivity
Package:SMD,P=2.54mm
ECAD Model:
Bottom/Top Entry Push-Pull Receptacle 2.54mm 24Pin 2A 760nm Gold Black SMD P=2.54mm
Pre-order
100,000
Factory Lead Time:22-26 weeks
1,000+$3.075
5,000+$2.7875
50,000+$2.3375
100,000+$2.1625
- +
Ext. Price(USD):$3,075.00
MOQ:1,000
Mult:1,000
Push-Pull Receptacle 2mm 22Pin 2A 203nm Gold Black TH
Pre-order
18,720
Factory Lead Time:10-16 weeks
24+
1,872+$1.7213
2,340+$1.6765
- +
Ext. Price(USD):$3,222.27
MOQ:1,872
Mult:468
SPQ:468
Molex
Package:SMD,P=1.5mm
ECAD Model:
Latch Holder Receptacle 1.5mm 13-Pin 2A Tin Beige SMD P=1.5mm 23.8mm(L) × 6.35mm(H)
Pre-order
270,000
Factory Lead Time:22-26 weeks
2,700+$0.8125
8,100+$0.7
20,700+$0.6875
- +
Ext. Price(USD):$2,193.75
MOQ:2,700
Mult:2,700
Connector 2.0mm Pitch Disconnectable Crimp Style
Available Stock
2,026
Estimated Ship Time:5-9 working days
22+
5+$0.4624
15+$0.3581
30+$0.3521
- +
Ext. Price(USD):$2.31
MOQ:5
Mult:1
SPQ:250
Molex
ECAD Model:
Push-Pull Receptacle, 2mm Pitch, 12-Pin, 1A, 380nm, Gold Plated, Black, TH, 12.19mm L × 4.19mm H
Pre-order
101,200
Factory Lead Time:22-26 weeks
1,012+$1.625
2,024+$1.5625
2,500+$1.3625
5,000+$1.275
- +
Ext. Price(USD):$1,644.50
MOQ:1,012
Mult:1,012
SPQ:1,012
Push-Pull Receptacle, 2mm Pitch, 18-Pin, 2A, 203nm, Gold Plated, Black, TH
Pre-order
19,200
Factory Lead Time:10-16 weeks
24+
1,920+$1.8817
2,560+$1.8327
- +
Ext. Price(USD):$3,612.86
MOQ:1,920
Mult:640
SPQ:640
Amphenol
ECAD Model:
Push-Pull Receptacle 2.54mm 28Pin Gold Blue TH
Pre-order
5,000
Factory Lead Time:10-16 weeks
24+
500+$8.3562
600+$8.1382
- +
Ext. Price(USD):$4,178.10
MOQ:500
Mult:100
SPQ:100
25 / PageGoto