Female Socket Headers

Results:

Female socket headers receive male pins to create removable PCB, module and board-to-board connections. Begin with the mating pin’s pitch, cross-section and contact arrangement, then define the acceptable insertion depth, socket height, entry direction and PCB termination needed for a mechanically secure and electrically stable connection.

Build the Mating Pair from the Male Pin

  1. Match the contact layout. Confirm pitch, number of positions, number of rows, row spacing and any intentionally unpopulated positions.
  2. Check the pin envelope. Compare the male pin’s width, thickness, shape and plating with the socket’s accepted contact range.
  3. Calculate contact engagement. The exposed male post must reach the female contact’s working area without exceeding its maximum insertion depth.
  4. Confirm polarization. Shrouds, keys, locating features and pin-one orientation must align across both halves.

Use Male Pin Headers to identify the corresponding exposed-pin connector before approving the female socket.

Check the Contact Engagement Window

Pitch compatibility does not confirm a complete match. The socket contact must grip the specified male pin and maintain enough overlap for the expected current, signal and mechanical conditions.

Drawing Field Required Comparison Mismatch Risk
Accepted pin size Male contact width, thickness and cross-section Loose contact or damaged spring beams
Minimum insertion depth Available male post length after accounting for body height Incomplete engagement or unstable resistance
Maximum insertion depth Post length entering the socket cavity Bottoming out or permanent contact deformation
Contact finish Female and male mating-surface plating Accelerated wear or inconsistent contact performance

Set the Installed Connection Height

Determine the finished assembly height from the female socket body, male header insulator, exposed post and actual mating overlap. For module sockets, confirm that the module seats at the intended height without contacting nearby components. For two-PCB assemblies, verify parallel-board spacing, component clearance and access for separation.

Height check: Female body height + exposed male structure − mating overlap = approximate installed connection height. Use the manufacturer drawings for the final tolerance calculation.

If controlled board spacing, elevated PCBs or pass-through contacts are the primary requirement, compare Board Stacking Connectors.

Select the Entry and PCB Side

Top-entry Choose for perpendicular mating above the PCB; check overhead clearance and extraction space.
Side-entry Choose for board-edge access or low-profile assemblies; confirm lateral keepout space.
Through-hole Match the finished-hole pattern, board thickness and solder-tail length.
Surface-mount Verify the recommended land pattern, coplanarity, locating features and reflow limits.

Unusual contact layouts, non-standard pin lengths or application-specific mating geometry may require Special Pin Headers. For additional guidance on header pitch, rows, mounting styles, pin dimensions and alternative-part evaluation, see the PCB Pin Header Selection Guide.

Record Both Halves in the BOM

Record the male and female part numbers together with pitch, positions, rows, accepted pin size, insertion-depth range, body height, installed height, entry direction, PCB mounting, plating and electrical ratings. Retaining both drawings and the approved mating combination helps prevent replacements that match the footprint but fail at the contact interface.

Read More
Female Socket HeadersResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Push-Pull Receptacle, 1.25mm, 1 Pos, 5 Pin, 500mA, 800nm, Tin, Black, SMD, 7.7mm L × 4.4mm H
Pre-order
2,000,000
Factory Lead Time:22-26 weeks
20,000+$0.65
- +
Ext. Price(USD):$13,000.00
MOQ:20,000
Mult:20,000
Amphenol
Package:SMD,P=1.27mm
ECAD Model:
Push-Pull Receptacle 1.27mm 2-Pos 16-Pin 1A 250nm Gold SMD P=1.27mm
Pre-order
700,000
Factory Lead Time:8 weeks
1,400+$0.7817
- +
Ext. Price(USD):$1,094.38
MOQ:1,400
Mult:1,400
SPQ:1,400
Push-Pull Receptacle 2.54mm 2 16-Pin 3A 800nm Gold Green TH
Pre-order
52,500
Factory Lead Time:22-26 weeks
525+$3.6
1,050+$3.225
- +
Ext. Price(USD):$1,890.00
MOQ:525
Mult:525
SPQ:525
Push-Pull Receptacle, 2mm Pitch, 2-Pos, 2A, Gold Plated, TH, 4.6mm L × 2.4mm H
Available Stock
220
Estimated Ship Time:4-6 working days
1+$0.2224
- +
Ext. Price(USD):$0.22
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
Push-Pull Receptacle 4.2mm 24-Pin 9A Gold TH
Pre-order
216,000
Factory Lead Time:22-26 weeks
2,160+$11.4625
8,000+$10.025
20,000+$9.8125
- +
Ext. Price(USD):$24,759.00
MOQ:2,160
Mult:2,160
Amphenol
ECAD Model:
Push-Pull Receptacle, 2.54mm Pitch, 1x42 Pin, 3A, 760nm, Gold Plated, Blue, TH, 106.6mm L
Pre-order
6,000
Factory Lead Time:10-16 weeks
24+
600+$4.0399
750+$3.9345
- +
Ext. Price(USD):$2,423.94
MOQ:600
Mult:150
SPQ:150
Push-Pull Receptacle 2.54mm Pitch 2-Ch 40-Pin 3A 760nm Gold Plated Black TH 57.35mm × 8.13mm
Pre-order
63,000
Factory Lead Time:22-26 weeks
630+$8.1125
1,035+$7.1125
10,035+$5.9875
25,020+$5.7375
- +
Ext. Price(USD):$5,110.87
MOQ:630
Mult:630
Receptacle, Bottom/Top Entry, Push-Pull, 2.54mm Pitch, 2 Pos, 34-Pin, 3A, 760nm, Gold, Gray, SMD
Pre-order
4,000
Factory Lead Time:10-16 weeks
24+
400+$2.2208
800+$2.1628
- +
Ext. Price(USD):$888.32
MOQ:400
Mult:400
SPQ:400
Molex
ECAD Model:
Pre-order
25,100
Factory Lead Time:22-26 weeks
251+$0.5875
1,001+$0.5625
- +
Ext. Price(USD):$147.46
MOQ:251
Mult:251
SPQ:251
TH Component, 2A
Pre-order
53,760
Factory Lead Time:10-16 weeks
24+
5,376+$0.8263
8,064+$0.8048
- +
Ext. Price(USD):$4,442.18
MOQ:5,376
Mult:2,688
SPQ:2,688
Socket, 2.54mm, 2-Pos, 26-Pin, 5.7A, 76nm, Gold, Black, Bracket Mount, TH, 33.53mm L × 4.95mm H
Pre-order
100
Factory Lead Time:8-10 weeks
1+$5.4527
50+$5.2597
36,207+$1.1026
78,286+$1.0085
- +
Ext. Price(USD):$250.82
MOQ:46
Mult:1
SPQ:1
Molex
ECAD Model:
Locking Receptacle Connector, 3.96mm, 10-Pin, 5A, Gold Plated, Board/Edge/TH Mount, 39.52mm L × 11.4mm H
Pre-order
123,200
Factory Lead Time:22-26 weeks
1,232+$1.475
4,000+$1.2875
10,000+$1.2625
- +
Ext. Price(USD):$1,817.20
MOQ:1,232
Mult:1,232
Amphenol
ECAD Model:
Push-Pull Receptacle 2.54mm 2-Pos 46-Pin 3A 760nm Gold Gray SMD
Pre-order
4,800
Factory Lead Time:10-16 weeks
24+
480+$4.7242
600+$4.6009
- +
Ext. Price(USD):$2,267.61
MOQ:480
Mult:120
SPQ:120
Push-Pull Receptacle 2.54mm 8Pin 3A 760nm Gold Gray TH
Pre-order
25,000
Factory Lead Time:10-16 weeks
24+
2,500+$0.446
2,600+$0.4343
- +
Ext. Price(USD):$1,115.00
MOQ:2,500
Mult:100
SPQ:100
Molex
Package:SMD,P=2mm
ECAD Model:
Push-Pull Receptacle, 2mm Pitch, 4-Pin, 1A, 760nm, Gold, Black, SMD, 4mm L × 6.1mm H
Pre-order
399,000
Factory Lead Time:22-26 weeks
3,990+$0.25
7,980+$0.2238
- +
Ext. Price(USD):$997.50
MOQ:3,990
Mult:3,990
SPQ:3,990
Mill-Max
Package:SMD,P=2.54mm,Horizontal SMD
ECAD Model:
Push-Pull Receptacle, 2.54mm Pitch, 2-Pin, 3A, 760nm, Gold-Plated, Black, SMD, Horizontal
Available Stock
134
Estimated Ship Time:6-12 working days
1+$3.4314
10+$3.0745
1,000+$2.9647
2,500+$2.9647
- +
Ext. Price(USD):$24.01
MOQ:7
Mult:1
Amphenol
ECAD Model:
Push-Pull Receptacle, 2.54mm Pitch, 44-Pin, 3A, 760nm, Gold Plated, Blue, TH, 55.8mm L
Pre-order
5,600
Factory Lead Time:10-16 weeks
24+
560+$3.2793
700+$3.1937
- +
Ext. Price(USD):$1,836.40
MOQ:560
Mult:140
SPQ:140
Conn Unshrouded Header HDR 4 POS 2.5mm Solder ST Top Entry Thru-Hole
Available Stock
950
Estimated Ship Time:14-17 working days
300+$0.126
500+$0.1151
10,000+$0.0814
30,000+$0.0814
- +
Ext. Price(USD):$50.02
MOQ:397
Mult:1
SPQ:1
JST
ECAD Model:
Available Stock
15,923
Estimated Ship Time:6-7 working days
22+
20+$0.2097
1,000+$0.0896
- +
Ext. Price(USD):$4.19
MOQ:20
Mult:20
JST
ECAD Model:
Available Stock
45
Estimated Ship Time:4-6 working days
26+
1+$2.6565
- +
Ext. Price(USD):$2.65
MOQ:1
Mult:1
SPQ:1
TH Component, 2A
Pre-order
12,320
Factory Lead Time:10-16 weeks
24+
1,232+$2.2696
1,848+$2.2104
- +
Ext. Price(USD):$2,796.14
MOQ:1,232
Mult:616
SPQ:616
Molex
ECAD Model:
Header, Latch Holder 5.03mm 3 9-Pin 5A 1.27μm Tin Black TH 19.7mm × 18.5mm
Pre-order
97,500
Factory Lead Time:22-26 weeks
975+$1.475
2,000+$1.2875
5,000+$1.2625
- +
Ext. Price(USD):$1,438.12
MOQ:975
Mult:975
Socket 2.54mm 2 12-Pin 3A 760nm Gold Black Bracket Mount, TH 21.79mm L × 8.13mm H
Pre-order
161,000
Factory Lead Time:22-26 weeks
1,610+$4.525
2,530+$4.2875
5,060+$4.0375
10,005+$3.8
25,070+$3.65
- +
Ext. Price(USD):$7,285.25
MOQ:1,610
Mult:1,610
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 6 POS 2mm Solder RA Side Entry Thru-Hole Box
Pre-order
90,000
Factory Lead Time:18-22 weeks
26+
9,000+$0.1973
27,000+$0.194
45,000+$0.189
- +
Ext. Price(USD):$1,775.70
MOQ:9,000
Mult:9,000
SPQ:9,000
Samtec
Package:SMD,P=2.54mm
ECAD Model:
Connector, Bottom Entry, Push-Pull, Receptacle, 26-Pin, 2-Pos, 2.54mm Pitch, 4.1A, 760nm, SMD, Gold, Black
Pre-order
12,500
Factory Lead Time:8-10 weeks
125+$10.5677
500+$9.2407
14,000+$3.11
30,800+$2.8663
- +
Ext. Price(USD):$1,320.96
MOQ:125
Mult:1
SPQ:1
25 / PageGoto