Female Socket Headers

Results:

Female socket headers receive male pins to create removable PCB, module and board-to-board connections. Begin with the mating pin’s pitch, cross-section and contact arrangement, then define the acceptable insertion depth, socket height, entry direction and PCB termination needed for a mechanically secure and electrically stable connection.

Build the Mating Pair from the Male Pin

  1. Match the contact layout. Confirm pitch, number of positions, number of rows, row spacing and any intentionally unpopulated positions.
  2. Check the pin envelope. Compare the male pin’s width, thickness, shape and plating with the socket’s accepted contact range.
  3. Calculate contact engagement. The exposed male post must reach the female contact’s working area without exceeding its maximum insertion depth.
  4. Confirm polarization. Shrouds, keys, locating features and pin-one orientation must align across both halves.

Use Male Pin Headers to identify the corresponding exposed-pin connector before approving the female socket.

Check the Contact Engagement Window

Pitch compatibility does not confirm a complete match. The socket contact must grip the specified male pin and maintain enough overlap for the expected current, signal and mechanical conditions.

Drawing Field Required Comparison Mismatch Risk
Accepted pin size Male contact width, thickness and cross-section Loose contact or damaged spring beams
Minimum insertion depth Available male post length after accounting for body height Incomplete engagement or unstable resistance
Maximum insertion depth Post length entering the socket cavity Bottoming out or permanent contact deformation
Contact finish Female and male mating-surface plating Accelerated wear or inconsistent contact performance

Set the Installed Connection Height

Determine the finished assembly height from the female socket body, male header insulator, exposed post and actual mating overlap. For module sockets, confirm that the module seats at the intended height without contacting nearby components. For two-PCB assemblies, verify parallel-board spacing, component clearance and access for separation.

Height check: Female body height + exposed male structure − mating overlap = approximate installed connection height. Use the manufacturer drawings for the final tolerance calculation.

If controlled board spacing, elevated PCBs or pass-through contacts are the primary requirement, compare Board Stacking Connectors.

Select the Entry and PCB Side

Top-entry Choose for perpendicular mating above the PCB; check overhead clearance and extraction space.
Side-entry Choose for board-edge access or low-profile assemblies; confirm lateral keepout space.
Through-hole Match the finished-hole pattern, board thickness and solder-tail length.
Surface-mount Verify the recommended land pattern, coplanarity, locating features and reflow limits.

Unusual contact layouts, non-standard pin lengths or application-specific mating geometry may require Special Pin Headers. For additional guidance on header pitch, rows, mounting styles, pin dimensions and alternative-part evaluation, see the PCB Pin Header Selection Guide.

Record Both Halves in the BOM

Record the male and female part numbers together with pitch, positions, rows, accepted pin size, insertion-depth range, body height, installed height, entry direction, PCB mounting, plating and electrical ratings. Retaining both drawings and the approved mating combination helps prevent replacements that match the footprint but fail at the contact interface.

Read More
Female Socket HeadersResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
CJT
ECAD Model:
Rectangular Connector Socket TH Single Row 2.50mm Pitch Header Vertical 10 Positions
Pre-order
100,000
Factory Lead Time:3-5 weeks
26+
1,000+$0.0965
3,000+$0.0926
5,000+$0.0887
- +
Ext. Price(USD):$96.50
MOQ:1,000
Mult:1,000
SPQ:1,000
Push-Pull Receptacle, 24-Pin, 1.27mm Pitch, 1A, Gold Plated, Black, TH
Pre-order
1,017,500
Factory Lead Time:8 weeks
2,035+$0.8513
- +
Ext. Price(USD):$1,732.39
MOQ:2,035
Mult:2,035
SPQ:2,035
JST
ECAD Model:
24-Pin 2.0mm Pitch Disconnectable Crimp Style Connectors
Available Stock
288
Estimated Ship Time:4-6 working days
288+$0.3266
- +
Ext. Price(USD):$94.06
MOQ:288
Mult:288
SPQ:288
Molex
ECAD Model:
Push-Pull Receptacle, 4.2mm, 10-Pin, 11A, Tin Plated, TH, 9.6mm H
Available Stock
32
Estimated Ship Time:3-5 working days
05+
10+$0.2173
50+$0.2135
100+$0.206
- +
Ext. Price(USD):$2.17
MOQ:10
Mult:10
SPQ:10
Molex
ECAD Model:
Locking Ramp Receptacle, 3.96mm, 7 Pin, 5A, Gold, Board Mount, Edge Mount, TH, 27.64mm L × 11.4mm H
Pre-order
21,200
Factory Lead Time:22-26 weeks
212+$1.225
424+$1.1875
847+$1.125
1,000+$0.9375
2,500+$0.825
- +
Ext. Price(USD):$259.70
MOQ:212
Mult:212
SPQ:212
Amphenol
ECAD Model:
Push-Pull Receptacle 2.54mm 1-Row 47-Pin 3A Tin Blue TH 119.3mm L
Pre-order
4,320
Factory Lead Time:10-16 weeks
24+
432+$6.1583
504+$5.9977
- +
Ext. Price(USD):$2,660.38
MOQ:432
Mult:72
SPQ:72
Amphenol
ECAD Model:
Push-Pull Receptacle, 2.54mm Pitch, 2 Pos, 16 Pin, Gold Plated, TH, 20.24mm L × 5.08mm H
Pre-order
13,920
Factory Lead Time:10-16 weeks
24+
1,392+$0.7789
2,088+$0.7587
- +
Ext. Price(USD):$1,084.22
MOQ:1,392
Mult:696
SPQ:696
Bottom/Top Entry Push-Pull Receptacle 2.54mm 1 26-Pin 2A 760nm Gold Black TH 66.04mm(L) × 3.56mm(H)
Pre-order
88,000
Factory Lead Time:25-42 weeks
880+$21.0742
- +
Ext. Price(USD):$18,545.29
MOQ:880
Mult:8
SPQ:8
TH 1A
Available Stock
3,010
Estimated Ship Time:7-15 working days
26+
3,010+$0.2831
6,020+$0.2722
9,030+$0.2613
- +
Ext. Price(USD):$852.13
MOQ:3,010
Mult:43
SPQ:43
Board Connector 1 2A Wire Mount
Available Stock
40,000
Estimated Ship Time:6-7 working days
26+
500+$0.0281
- +
Ext. Price(USD):$14.05
MOQ:500
Mult:500
Harwin
Package:SMD,P=1.27mm
ECAD Model:
Push-Pull Receptacle, 5-Pin, 1.27mm Pitch, 1A, SMD, Gold Plated, Black
Available Stock
463
Estimated Ship Time:6-12 working days
10+$0.6742
100+$0.604
1,000+$0.5825
2,500+$0.5825
- +
Ext. Price(USD):$26.96
MOQ:40
Mult:10
Molex
ECAD Model:
Push-Pull Receptacle, 2.54mm Pitch, 3-Pin, 3A, 380nm, Gold/Black, TH, 7.62mm L × 8.5mm H
Pre-order
252,000
Factory Lead Time:22-26 weeks
2,520+$0.6625
8,000+$0.5875
20,000+$0.575
- +
Ext. Price(USD):$1,669.50
MOQ:2,520
Mult:2,520
Samtec
ECAD Model:
Samtec FHP Series Wire-to-Board Connector, 10-Pin, 3.96mm Pitch, Right Angle, TH
Available Stock
10
Estimated Ship Time:4-6 working days
1+$4.5977
- +
Ext. Price(USD):$4.59
MOQ:1
Mult:1
SPQ:1
Amphenol
ECAD Model:
Push-Pull Receptacle 2.54mm 1 23-Pin 3A 2μm Tin Blue TH
Pre-order
10,800
Factory Lead Time:10-16 weeks
24+
1,080+$2.9433
1,260+$2.8665
- +
Ext. Price(USD):$3,178.76
MOQ:1,080
Mult:180
SPQ:180
Molex
ECAD Model:
Header, Locking Ramp 6.35mm 2-Pin 20A 3.5μm Tin White TH 13.97mm(L) × 7.62mm(W)
Available Stock
1,496
Estimated Ship Time:3-6 working days
21+
1+$0.5566
100+$0.3337
1,496+$0.1668
- +
Ext. Price(USD):$0.55
MOQ:1
Mult:1
SPQ:1,496
JST
ECAD Model:
Shrouded Header, Straight, Through Hole
Available Stock
1,111
Estimated Ship Time:4-6 working days
30+$0.2657
300+$0.1571
- +
Ext. Price(USD):$7.97
MOQ:30
Mult:30
SPQ:300
Push-Pull Receptacle, 2mm Pitch, 14-Pin, 2A, 760nm, Gold, Black, SMD
Pre-order
22,400
Factory Lead Time:10-16 weeks
24+
2,240+$1.5029
3,360+$1.4637
- +
Ext. Price(USD):$3,366.49
MOQ:2,240
Mult:1,120
SPQ:1,120
Molex
Package:SMD,P=2mm
ECAD Model:
Push-Pull Receptacle 2mm 6Pin 1.9A 760nm Gold Black SMD P=2mm 6mm L × 5.95mm H
Pre-order
900,000
Factory Lead Time:22-26 weeks
9,000+$0.8375
- +
Ext. Price(USD):$7,537.50
MOQ:9,000
Mult:9,000
SPQ:9,000
Samtec SSQ Series Board-to-Board Receptacle 2.54mm Pitch 6-Pin Right Angle TH
Available Stock
861
Estimated Ship Time:6-12 working days
10+$1.1372
100+$1.0425
500+$1.0425
1,000+$1.0425
- +
Ext. Price(USD):$25.01
MOQ:22
Mult:1
Amphenol
ECAD Model:
Receptacle Connector, Bottom/Top Entry, Push-Pull, 2.54mm Pitch, 14-Pin, 3A, Gold Plated, Gray, SMD, 17.7mm L × 5.08mm H
Pre-order
15,840
Factory Lead Time:10-16 weeks
24+
1,584+$0.8919
2,112+$0.8687
- +
Ext. Price(USD):$1,412.76
MOQ:1,584
Mult:528
SPQ:528
Molex
ECAD Model:
1 2.5A TH 17.68mm (L) × 7.7mm (H)
Pre-order
113,400
Factory Lead Time:22-26 weeks
1,134+$0.5
4,000+$0.4375
- +
Ext. Price(USD):$567.00
MOQ:1,134
Mult:1,134
Dual Row Receptacle, 180°, PH2.54, H8.5mm, Y-Type, 2x17P, PC3.2, PBT, Full Au Plating
Available Stock
10,000
Estimated Ship Time:7-15 working days
26+
1,000+$0.3979
2,000+$0.3826
3,000+$0.3673
- +
Ext. Price(USD):$397.90
MOQ:1,000
Mult:1,000
SPQ:1,000
Amphenol
ECAD Model:
Receptacle Bottom/Top Entry Push-Pull 2.54mm Pitch 30-Pin 3A Gold Blue TH
Pre-order
8,400
Factory Lead Time:10-16 weeks
24+
840+$1.9887
1,050+$1.9367
- +
Ext. Price(USD):$1,670.50
MOQ:840
Mult:210
SPQ:210
Harwin
ECAD Model:
Bottom/Top Entry Push-Pull Receptacle 2.54mm 2 Pos 16-Pin 3A 15nm Gold Black SMD
Available Stock
270
Estimated Ship Time:6-12 working days
10+$1.9881
100+$1.9526
250+$1.9526
500+$1.9171
1,000+$1.9171
- +
Ext. Price(USD):$25.84
MOQ:13
Mult:1
Amphenol
ECAD Model:
Bottom/Top Entry, Push-Pull Receptacle, 2.54mm Pitch, 4-Pin, 760nm, Gold Plated, Blue, TH
Pre-order
83,520
Factory Lead Time:10-16 weeks
24+
8,352+$0.3314
9,744+$0.3228
- +
Ext. Price(USD):$2,767.85
MOQ:8,352
Mult:1,392
SPQ:1,392
25 / PageGoto