Female Socket Headers

Results:

Female socket headers receive male pins to create removable PCB, module and board-to-board connections. Begin with the mating pin’s pitch, cross-section and contact arrangement, then define the acceptable insertion depth, socket height, entry direction and PCB termination needed for a mechanically secure and electrically stable connection.

Build the Mating Pair from the Male Pin

  1. Match the contact layout. Confirm pitch, number of positions, number of rows, row spacing and any intentionally unpopulated positions.
  2. Check the pin envelope. Compare the male pin’s width, thickness, shape and plating with the socket’s accepted contact range.
  3. Calculate contact engagement. The exposed male post must reach the female contact’s working area without exceeding its maximum insertion depth.
  4. Confirm polarization. Shrouds, keys, locating features and pin-one orientation must align across both halves.

Use Male Pin Headers to identify the corresponding exposed-pin connector before approving the female socket.

Check the Contact Engagement Window

Pitch compatibility does not confirm a complete match. The socket contact must grip the specified male pin and maintain enough overlap for the expected current, signal and mechanical conditions.

Drawing Field Required Comparison Mismatch Risk
Accepted pin size Male contact width, thickness and cross-section Loose contact or damaged spring beams
Minimum insertion depth Available male post length after accounting for body height Incomplete engagement or unstable resistance
Maximum insertion depth Post length entering the socket cavity Bottoming out or permanent contact deformation
Contact finish Female and male mating-surface plating Accelerated wear or inconsistent contact performance

Set the Installed Connection Height

Determine the finished assembly height from the female socket body, male header insulator, exposed post and actual mating overlap. For module sockets, confirm that the module seats at the intended height without contacting nearby components. For two-PCB assemblies, verify parallel-board spacing, component clearance and access for separation.

Height check: Female body height + exposed male structure − mating overlap = approximate installed connection height. Use the manufacturer drawings for the final tolerance calculation.

If controlled board spacing, elevated PCBs or pass-through contacts are the primary requirement, compare Board Stacking Connectors.

Select the Entry and PCB Side

Top-entry Choose for perpendicular mating above the PCB; check overhead clearance and extraction space.
Side-entry Choose for board-edge access or low-profile assemblies; confirm lateral keepout space.
Through-hole Match the finished-hole pattern, board thickness and solder-tail length.
Surface-mount Verify the recommended land pattern, coplanarity, locating features and reflow limits.

Unusual contact layouts, non-standard pin lengths or application-specific mating geometry may require Special Pin Headers. For additional guidance on header pitch, rows, mounting styles, pin dimensions and alternative-part evaluation, see the PCB Pin Header Selection Guide.

Record Both Halves in the BOM

Record the male and female part numbers together with pitch, positions, rows, accepted pin size, insertion-depth range, body height, installed height, entry direction, PCB mounting, plating and electrical ratings. Retaining both drawings and the approved mating combination helps prevent replacements that match the footprint but fail at the contact interface.

Read More
Female Socket HeadersResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Connector Header 30POS 2ROW 1.5mm Pitch
Available Stock
2
Estimated Ship Time:4-6 working days
1+$1.223
- +
Ext. Price(USD):$1.22
MOQ:1
Mult:1
SPQ:1
Molex
Package:SMD,P=2mm
ECAD Model:
Header, Push-Pull, 2mm Pitch, 24-Pin, 1A, 2.5μm Tin, SMD, P=2mm, 24.19mm L × 5.33mm H
Pre-order
268,800
Factory Lead Time:22-26 weeks
2,688+$2.35
- +
Ext. Price(USD):$6,316.80
MOQ:2,688
Mult:2,688
SPQ:2,688
Amphenol
Package:SMD,P=1.27mm
ECAD Model:
Push-Pull Receptacle, 1.27mm Pitch, 24-Pin, 1A, 250nm, Gold, Black, SMD, 15.7mm L × 3mm H
Available Stock
1
Estimated Ship Time:4-6 working days
1+$1.7509
- +
Ext. Price(USD):$1.75
MOQ:1
Mult:1
SPQ:1
XKB Connection
Package:SMD,P=1.27mm(Staggered Pins)
ECAD Model:
Diode 1A SMD P=1.27mm Interleaved Pins
Available Stock
10,000
Estimated Ship Time:7-15 working days
26+
1,000+$0.3711
2,000+$0.3568
3,000+$0.3426
- +
Ext. Price(USD):$371.10
MOQ:1,000
Mult:1,000
SPQ:1,000
Push-Pull Receptacle, 2mm, 2 Pos, 28-Pin, 2A, 203nm, Gold Plated, TH
Pre-order
13,200
Factory Lead Time:10-16 weeks
24+
1,320+$2.5904
1,980+$2.5228
- +
Ext. Price(USD):$3,419.32
MOQ:1,320
Mult:660
SPQ:660
Amphenol
ECAD Model:
Bottom/Top Entry Push-Pull Receptacle 2.54mm 2-Pos 42-Pin 3A 2μm Tin Blue TH
Pre-order
5,720
Factory Lead Time:10-16 weeks
24+
572+$2.3124
715+$2.2521
- +
Ext. Price(USD):$1,322.69
MOQ:572
Mult:143
SPQ:143
Conn Shrouded Header (4 Sides) HDR 10 POS 3.81mm Solder ST Thru-Hole
Available Stock
384
Estimated Ship Time:14-17 working days
10+$2.5181
30+$1.9495
500+$1.4368
1,000+$1.4286
- +
Ext. Price(USD):$50.36
MOQ:20
Mult:1
SPQ:1
TH Component, 2A
Pre-order
12,540
Factory Lead Time:10-16 weeks
24+
1,254+$2.8714
1,881+$2.7965
- +
Ext. Price(USD):$3,600.73
MOQ:1,254
Mult:627
SPQ:627
Receptacle, Push-Pull, 2.54mm Pitch, 2 Pos, 32-Pin, 3A, 760nm IR, Gold Plated, Gray, TH, 40.56mm L × 5.08mm H
Pre-order
18,200
Factory Lead Time:10-16 weeks
24+
1,820+$1.7244
2,002+$1.6794
- +
Ext. Price(USD):$3,138.40
MOQ:1,820
Mult:182
SPQ:182
Amphenol
ECAD Model:
Push-Pull Receptacle, 2.54mm Pitch, 22-Pos, 3A, Gold Plated, SMD
Pre-order
6,000
Factory Lead Time:10-16 weeks
24+
600+$4.3164
900+$4.2037
- +
Ext. Price(USD):$2,589.84
MOQ:600
Mult:300
SPQ:300
Amphenol
ECAD Model:
Push-Pull Receptacle 2.54mm 2 54-Pin 3A 2μm Tin Gray SMD
Pre-order
4,800
Factory Lead Time:10-16 weeks
24+
480+$5.7536
576+$5.6035
- +
Ext. Price(USD):$2,761.72
MOQ:480
Mult:96
SPQ:96
Samtec
Package:SMD,P=1.27mm
ECAD Model:
Push-Pull Receptacle, 60-Pin, 2.9A, 760nm, Gold/Black, SMD, P=1.27mm, 38.48mm L × 4.19mm H
Pre-order
12,500
Factory Lead Time:8-10 weeks
125+$23.0415
250+$20.3875
6,050+$7.5977
12,650+$7.009
- +
Ext. Price(USD):$2,880.18
MOQ:125
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Shrouded Header HDR 40 POS 2mm Solder ST Thru-Hole Tray
Available Stock
20
Estimated Ship Time:3-5 working days
06+
1+$3.1187
30+$3.0665
50+$2.9589
- +
Ext. Price(USD):$3.11
MOQ:1
Mult:1
SPQ:1
Amphenol
ECAD Model:
Bottom/Top Entry Push-Pull Receptacle 2.54mm 40-Pin 3A 2μm Tin Gray SMD, 55.8mm L × 5.08mm H
Pre-order
6,400
Factory Lead Time:10-16 weeks
24+
640+$2.5309
800+$2.4649
- +
Ext. Price(USD):$1,619.77
MOQ:640
Mult:160
SPQ:160
Samtec
ECAD Model:
Samtec Board-to-Board Receptacle, SS Series, Right Angle, TH, 2.54mm Pitch, 10-Pin
Available Stock
152
Estimated Ship Time:6-12 working days
10+$1.0348
100+$0.9486
500+$0.9486
1,000+$0.9486
- +
Ext. Price(USD):$24.83
MOQ:24
Mult:1
Molex
ECAD Model:
Fuse, 2A, SMD, 23.8mm L × 8.5mm H
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$1.45
8,000+$1.2625
20,000+$1.2375
- +
Ext. Price(USD):$4,350.00
MOQ:3,000
Mult:3,000
Amphenol
ECAD Model:
Bottom or Top Entry Push-Pull Receptacle 2.54mm 2 16-Pin 3A 2μm Tin Blue TH
Pre-order
11,310
Factory Lead Time:10-16 weeks
24+
1,131+$0.8523
1,508+$0.83
- +
Ext. Price(USD):$963.95
MOQ:1,131
Mult:377
SPQ:377
Molex
ECAD Model:
Push-Pull Receptacle 2.54mm 32Pin 3A 380nm Gold TH 40.64mm × 5.08mm
Pre-order
162,500
Factory Lead Time:28-30 weeks
26+
1,625+$1.5327
3,250+$1.4714
4,875+$1.4101
- +
Ext. Price(USD):$2,490.63
MOQ:1,625
Mult:1,625
SPQ:1,625
Molex
ECAD Model:
Push-Pull Receptacle, 2.54mm Pitch, 18 Pos, 2.5A, Tin Plated, Black, TH, 5.05mm H
Pre-order
4,000,000
Factory Lead Time:22-26 weeks
40,000+$5.6125
100,000+$5.5
- +
Ext. Price(USD):$224,500.00
MOQ:40,000
Mult:40,000
Push-Pull Receptacle 2mm 1 Pos 3Pin 2A 203nm Gold Black SMD
Pre-order
80,640
Factory Lead Time:10-16 weeks
24+
8,064+$0.417
10,752+$0.4061
- +
Ext. Price(USD):$3,362.68
MOQ:8,064
Mult:2,688
SPQ:2,688
Amphenol
ECAD Model:
Push-Pull Receptacle, 2.54mm Pitch, 72-Pin, 3A, Tin Plated, Blue, TH Mount, 91.36mm L × 5.08mm H
Pre-order
3,900
Factory Lead Time:10-16 weeks
24+
390+$4.1132
468+$4.0059
- +
Ext. Price(USD):$1,604.14
MOQ:390
Mult:78
SPQ:78
JST
ECAD Model:
1 10A TH 7.86mm L × 8.5mm H
Available Stock
13,360
Estimated Ship Time:6-7 working days
22+
20+$0.1722
1,000+$0.0599
- +
Ext. Price(USD):$3.44
MOQ:20
Mult:20
Molex
ECAD Model:
Push-Pull Receptacle 2mm 2 Pos 8pin 1A 380nm Gold Black TH 8.19mm x 4.191mm x 4.19mm
Pre-order
2,944,000
Factory Lead Time:25-42 weeks
29,440+$0.8769
- +
Ext. Price(USD):$25,815.93
MOQ:29,440
Mult:2,944
SPQ:2,944
Amphenol
ECAD Model:
Push-Pull Receptacle 2.54mm 2 60Pin 3A 760nm Gold Black TH 76.2mm × 6.1mm
Available Stock
3
Estimated Ship Time:4-6 working days
1+$9.5954
- +
Ext. Price(USD):$9.59
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
Push-Pull Receptacle 12-Pin 5A 2.54μm Tin Black TH 8.4mm H
Available Stock
4
Estimated Ship Time:3-5 working days
09+
1+$2.5346
30+$2.4922
50+$2.4049
- +
Ext. Price(USD):$2.53
MOQ:1
Mult:1
SPQ:1
25 / PageGoto