Board Stacking Connectors

Results:

Board stacking connectors create direct electrical links between parallel, elevated, right-angle or otherwise arranged PCBs. Define the board orientation and required board-to-board distance first, then select a compatible header and socket pair by pitch, positions, mated height, mounting method, footprint and electrical performance.

Set the Relationship Between the PCBs

Parallel stacking

Places one PCB above another. Establish the board-to-board distance and available component clearance between the boards.

Elevated stacking

Uses longer posts, elevated sockets or a suitable mating combination to provide additional space between parallel PCBs.

Right-angle connection

Joins boards at 90 degrees. Check the connector orientation, PCB edge location and clearance for mating and removal.

Pass-through or bottom entry

Allows contacts to enter from below or continue through a board. Verify the insertion direction, post length and board thickness.

For fine-pitch array, floating, free-height or broader parallel, perpendicular and coplanar PCB interfaces, compare Board-to-Board & Mezzanine Connectors. If the overall connection method is still open, use the PCB connector selection guide to compare stacking, card-edge, wire-to-board and FFC/FPC paths.

Calculate the Stack from the Complete Mated Pair

PCB A

Footprint, board thickness and component clearance

Header or plug

Body height, mating post and PCB termination

Mated interface

Specified engagement depth and resulting mated height

Socket or receptacle

Body height, entry depth and PCB termination

PCB B

Matching footprint, orientation and assembly space

Stack-height rule: determine the board-to-board distance from the manufacturer’s mated drawing for the exact header and socket combination. Do not calculate it by simply adding the external heights of two individual connectors.

Match Both Sides of the Stack

Header or plug Socket or receptacle Pairing requirement
Manufacturer series and part number Manufacturer series and part number The manufacturer identifies the products as compatible mating parts
Pitch, positions and rows Pitch, positions and rows Contact spacing and complete contact arrangement agree
Post length and body height Entry depth and body height The combination produces the required mated height and engagement
Vertical or right-angle orientation Vertical or right-angle orientation The pair places both PCBs in the intended relationship

Matching pitch and position count alone does not establish compatibility. Contact geometry, polarization, engagement depth and housing dimensions must also agree. For open pin-and-socket stacking systems, compare the required Male Pin Headers with compatible Female Socket Headers, then verify the complete pairing in the manufacturer’s drawings.

Place the Pair on Both PCBs

Footprint and orientation

  • Recommended pads, holes and solder-mask dimensions
  • Pin 1 marking and mating direction on both boards
  • SMT, through-hole or press-fit termination
  • Locating posts, board locks and mounting holes

Assembly clearance

  • PCB edge distance and component keep-out areas
  • Space required for mating and unmating
  • SMT pick-and-place and reflow requirements
  • Alignment tolerance when multiple connector pairs are used

Verify Performance After the Geometry Fits

Confirm current and voltage ratings, contact resistance, operating temperature, contact plating, mating cycles and retention requirements for the complete pair. High-speed designs may also require specified impedance, insertion loss, crosstalk and PCB routing conditions for the selected series.

Final pairing record: place both complete part numbers, the manufacturer-specified mating relationship, target board-to-board distance, PCB footprints and orientation in the design documentation before adding the connector pair to the BOM.

Read More
Board Stacking ConnectorsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Pad, TH Mount, 12.1mm L × 8.7mm H
Available Stock
1,905
Estimated Ship Time:6-12 working days
10+$0.9102
100+$0.8496
1,000+$0.8192
2,500+$0.8192
- +
Ext. Price(USD):$27.30
MOQ:30
Mult:10
25 / PageGoto