SN65HVD63RGTR
Manufacturer: Texas Instruments
Part Number: SN65HVD63RGTR
| Attribute | Value |
| cate_name | RS-485/RS-422 Transceivers |
| rohs | Compliance |
| reference_package | VQFN-16 |
| mounting | SMD mount，glue mount |
| application_level | Industrial |
| lifecycle | On sale |
| spm | Tape & Reel |
| operating_temperature | -40℃~105℃ |
| length_width_height | 950μm(height) |
| data_rate | 115Kbps |
| max_operating_supply_voltage | 5.5V |
| max_propagation_delay_time | - |
| min_operating_supply_voltage | 3V |
| number_of_drivers | 1 |
| number_of_receivers | 1 |
| protocols_supported | RS-485 |
| typical_supply_current | 33mA |
The Texas Instruments SN65HVD63RGTR is a high-performance, 3.3V CAN (Controller Area Network) transceiver designed to meet the demands of automotive and industrial applications. This device is part of Texas Instruments' extensive portfolio of communication interface products, offering robust solutions for reliable data transmission in noise-prone environments.
Features:
1. High-Speed Operation: Supports data rates up to 1 Mbps, making it suitable for high-speed communication needs.
2. 3.3V Operation: Designed for low-voltage applications, reducing power consumption and heat dissipation.
3. Differential Reception: Provides robust noise immunity, crucial for industrial and automotive environments.
4. Wake-Up Signal: Allows the microcontroller to wake up from a low-power mode, enhancing energy efficiency.
5. Standby Mode: Reduces power consumption during periods of inactivity.
6. Short-Circuit Protection: Protects the device from damage due to short circuits on the CAN bus.
Development Support:
Texas Instruments provides comprehensive development support for the SN65HVD63RGTR, including:
- Technical Documentation: Detailed datasheets, application notes, and design guides.
- Software Tools: CAN protocol analyzers and configuration tools to facilitate development.
- Development Kits: Hardware kits for prototyping and testing CAN communication systems.
Application Areas:
The SN65HVD63RGTR is widely used in various applications due to its reliability and performance, including:
- Automotive networks for engine control, safety systems, and infotainment.
- Industrial automation for machine-to-machine communication in manufacturing plants.
- Embedded systems in robotics and IoT devices for distributed control.
Parameter Introduction:
- Supply Voltage Range: 3.3V
- Operating Temperature Range: -40°C to +125°C
- Data Rate: Up to 1 Mbps
- Transceiver Mode: CAN 2.0B and CAN FD (FD - Flexible Data-Rate)
- Package Type: RGTR (Reflow soldering)
Frequently Asked Questions (FAQs):
1. Q: What is the main advantage of using the SN65HVD63RGTR in automotive applications?
A: Its high-speed operation and robust noise immunity make it ideal for automotive networks where data integrity and reliability are critical.
2. Q: Can the SN65HVD63RGTR operate in extreme temperatures?
A: Yes, it can operate in a wide temperature range from -40°C to +125°C, suitable for harsh environments.
3. Q: How does the wake-up signal feature benefit energy consumption?
A: The wake-up signal allows the system to enter a low-power state when not in use, reducing overall energy consumption.
4. Q: Is there any protection against short circuits?
A: Yes, the SN65HVD63RGTR includes short-circuit protection to prevent damage to the device.
5. Q: What kind of development tools does Texas Instruments offer for this transceiver?
A: Texas Instruments offers a range of tools including technical documentation, software tools for CAN protocol analysis, and development kits for hands-on experience.
This concise introduction to the Texas Instruments SN65HVD63RGTR provides an overview of its capabilities, features, and applications, along with support and parameter details to assist developers in integrating this transceiver into their projects.
Please refer to the product rule book for details.
TI is best known for its innovative contributions to the electronics industry. It pioneered the development of the integrated circuit in 1958, a technological breakthrough that revolutionized the world of electronics and paved the way for modern computing systems. This innovation has been foundational in the advancement of computers, telecommunications, and many other electronic devices.
The company operates through two main segments: Analog and Embedded Processing. The Analog segment focuses on products like power management chips, audio and operational amplifiers, data converters, and interface products. These components are crucial for managing power, amplifying sound, converting signals, and facilitating communication between devices. TI's analog ICs are used in a wide variety of applications, including industrial, automotive, personal electronics, communication equipment, and enterprise systems.
The Embedded Processing segment involves microcontrollers, digital signal processors (DSPs), and applications processors. These products are used in automotive, industrial, and consumer electronics applications. They are essential for processing complex digital data, controlling electronic systems, and supporting the infrastructure of smart devices and the Internet of Things (IoT).
Texas Instruments also places a strong emphasis on education through its educational technology products, including graphing calculators and classroom software. TI’s calculators have been a staple in mathematics and science classrooms around the world, helping to educate generations of students and making complex mathematical concepts more accessible.
TI is committed to innovation and quality, investing heavily in research and development. The company holds thousands of patents and is continually pushing the boundaries of what is possible in electronics technology. TI’s innovations not only enhance the performance and efficiency of electronic products but also contribute to environmental sustainability through advancements in power-saving technologies.
Moreover, Texas Instruments maintains a strong ethical stance with a commitment to corporate responsibility. It strives to uphold high standards in environmental responsibility, community engagement, and governance practices. TI's corporate culture is characterized by a focus on integrity, respect, and the aspiration to achieve the highest level of customer satisfaction.
In summary, Texas Instruments stands as a leader in the semiconductor industry, driven by a history of innovation, a broad portfolio of technologies, and a commitment to positively impacting the world through its products and practices. Whether through advancing technology or empowering education, TI continues to shape a future where electronics enhance the lives of people everywhere.
1.Q: What is unikeyic.com
Unikeyic is a global authorized distributor and stockist specializing in high-quality electronic components. We primarily provide active devices, passive devices, discrete devices, connectors, and other categories of products with over 200,000 unique, in-stock electronic components.
2.Q: Why choose Unikeyic?
1.Well stocked: Collaborating with over 2,000 suppliers and covering 200,000 unique, in-stock electronic components.
2.Global Procurement: Having a professional procurement team with over a hundred members to support IC sourcing.
3.Authenticity Guarantee:Possessing quality testing center accredited by CNAS to ensure 100% authentic products.
4.Global Service Network: Building the global supply chain service network centered in Singapore to serve global market.
5.Efficient Logistics: Self-built storage and logistics center to achieve efficient and expedient delivery.
6.Engineering Support: Forming the teams of FAEs, PMs, and solution designers to offer end-to-end engineering services.
3.Q:What brand authorizations and agencies has Unikeyic obtained?
Our core authorized product lines including renowned international brands such as Intel, Diotec, Phoenix, MPS, Amphenol, WAGO, etc. We also have top on-sale product lines featuring products from world-renowned manufacturers like TI, ST, ADI, Microchip, TE, onsemi, providing strong competitive pricing advantages.
4.Q: About pricing?
We will make every effort to strive for more favorable prices and delivery dates, while ensuring that all materials are 100% authentic from the original manufacturers. In addition,There is a difference between the spot price and the order price.
5.Q:Regarding quality assurance?
With laboratory-level quality testing capabilities accredited by CNAS, a professional quality inspection team consisting of over 40 members is equipped with more than 70 quality inspection equipments, we effectively ensure 100% authentic from the original manufacturers.
6.Q: How do I place an order on Unikeyic?
1.Search the material
2.Confirm the stock & price
3.Add to cart
4.Confirm the address & invoice information
5.Submit order & pay
7.Q:Shipping cost?
The transportation fee depends on the destination, weight of the goods, and packaging size. If you need a quote for shipping costs, please let us know.
8.Q:How to contact us and get support?
Need any After-Sales service, please feel free to contact us:support@unikeyic.com
Certifications
