Wire to Board Connectors

Results:

Wire-to-board connectors create detachable signal or power connections between discrete wires and a printed circuit board. This category includes PCB headers and wafer connectors in different pitches, position counts, orientations and mounting styles. Before ordering, identify whether the design also requires a separate wire-side housing, crimp contacts or other series-matched components.

Turn the Connection into a Complete BOM

A wire-to-board connection is often a component system rather than one finished part. Start with the PCB-mounted connector, then identify every separately ordered part required on the wire side.

BOM line What it does Primary checks
PCB header or receptacle Provides the board-mounted mating interface Series, pitch, positions, orientation and PCB mounting
Wire-side housing Positions and protects the terminated wires Mating series, rows, latch, keying and wire exit
Contacts or terminals Forms the electrical and mechanical connection to each wire Wire range, contact gender, plating and termination method
Accessories and tooling Supports retention, sealing, strain relief and assembly Secondary locks, seals and specified crimp or insertion tools

When the wire-side shell is sold separately, browse Rectangular Connector Housings. Separately ordered pins, sockets and crimp terminals can be compared under Rectangular Connector Contacts.

Choose the Wire Termination Route

Crimp systems use a terminal selected for the connector series and the specified conductor size. Check both the conductor range and insulation diameter, then confirm the required strip length, crimp tooling and terminal insertion direction.

IDC systems terminate compatible insulated conductors without a conventional crimp terminal. Match the connector to the supported cable construction, conductor spacing and insulation specification.

Direct wire-to-board products connect conductors to the PCB without a conventional plug-and-header pair. Use this route only when the selected part explicitly supports the intended wire and termination process. For a deeper explanation of terminals, housings, locking features and harness BOMs, see the Wiring Harness Connector Types guide.

Lock the Mating Interface Before Comparing Ratings

  1. Confirm the manufacturer, product family and exact mating series.
  2. Match pitch, number of positions, row count and contact gender.
  3. Select vertical or right-angle mating according to the cable exit and enclosure clearance.
  4. Choose surface-mount or through-hole termination to suit the PCB footprint and assembly process.
  5. Verify the recommended mating part numbers in the individual product documentation.
Equal pitch and position count do not establish compatibility. Keying, polarization, contact geometry, latch position and housing dimensions can differ between connector series.

Match the Contact to the Wire

  • Wire range: Check AWG or conductor cross-sectional area as well as insulation diameter.
  • Electrical load: Compare current and voltage ratings using the conditions stated in the product documentation.
  • Contact finish: Select the plating option specified for the circuit, environment and required mating life.
  • Assembly process: Confirm the approved applicator or hand tool, inspection criteria and any insertion or removal tooling.

Close the PCB and Harness Checks

Before releasing the design, verify the PCB footprint, pin numbering, board thickness where applicable, connector height, cable bend radius and available mating clearance. The completed BOM should record the header, housing, contacts, locks or seals, wire specification and required tooling as separate line items.

Also check contact resistance, operating temperature, retention, mating cycles and vibration requirements against the datasheet for the exact part number. If the design needs a different rectangular interconnection path rather than a wire-to-board system, compare the broader Rectangular Connectors range.

Read More
Wire to Board ConnectorsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
HOOYA
Package:SMD,P=2mm
ECAD Model:
SMD, Pitch=2mm
Pre-order
10,000
Factory Lead Time:5-6 weeks
25+
1,000+$0.0611
- +
Ext. Price(USD):$61.10
MOQ:1,000
Mult:1,000
SPQ:1,000
HOOYA
Package:SMD,P=1.25mm
ECAD Model:
SMD, Pitch=1.25mm
Pre-order
10,000
Factory Lead Time:5-6 weeks
25+
1,000+$0.0398
- +
Ext. Price(USD):$39.80
MOQ:1,000
Mult:1,000
SPQ:1,000
HOOYA
Package:SMD,P=2.5mm
ECAD Model:
SMD, Pitch 2.5mm
Pre-order
5,000
Factory Lead Time:5-6 weeks
25+
500+$0.0337
- +
Ext. Price(USD):$16.85
MOQ:500
Mult:500
SPQ:500
HOOYA
Package:SMD,P=1.5mm
ECAD Model:
SMD, Pitch 1.5mm
Pre-order
10,000
Factory Lead Time:5-6 weeks
25+
1,000+$0.0487
- +
Ext. Price(USD):$48.70
MOQ:1,000
Mult:1,000
SPQ:1,000
HOOYA
Package:SMD,P=1mm
ECAD Model:
SMD, P=1mm
Pre-order
15,000
Factory Lead Time:5-6 weeks
25+
1,500+$0.0274
- +
Ext. Price(USD):$41.10
MOQ:1,500
Mult:1,500
SPQ:1,500
HOOYA
Package:SMD,P=2mm
ECAD Model:
SMD, Pitch=2mm
Pre-order
5,000
Factory Lead Time:5-6 weeks
25+
500+$0.0449
- +
Ext. Price(USD):$22.45
MOQ:500
Mult:500
SPQ:500
HOOYA
Package:SMD,P=1.25mm
ECAD Model:
SMD, Pitch=1.25mm
Pre-order
5,000
Factory Lead Time:5-6 weeks
25+
500+$0.0324
- +
Ext. Price(USD):$16.20
MOQ:500
Mult:500
SPQ:500
HOOYA
Package:SMD,P=2.5mm
ECAD Model:
SMD, Pitch 2.5mm
Pre-order
10,000
Factory Lead Time:5-6 weeks
25+
1,000+$0.0822
- +
Ext. Price(USD):$82.20
MOQ:1,000
Mult:1,000
SPQ:1,000
HOOYA
Package:SMD,P=2.5mm
ECAD Model:
SMD, Pitch 2.5mm
Pre-order
10,000
Factory Lead Time:5-6 weeks
25+
1,000+$0.0747
- +
Ext. Price(USD):$74.70
MOQ:1,000
Mult:1,000
SPQ:1,000
HOOYA
Package:SMD,P=1.25mm
ECAD Model:
SMD, Pitch=1.25mm
Pre-order
5,000
Factory Lead Time:5-6 weeks
25+
500+$0.0299
- +
Ext. Price(USD):$14.95
MOQ:500
Mult:500
SPQ:500
HOOYA
Package:SMD,P=2.5mm
ECAD Model:
SMD, Pitch 2.5mm
Pre-order
5,000
Factory Lead Time:5-6 weeks
25+
500+$0.0512
- +
Ext. Price(USD):$25.60
MOQ:500
Mult:500
SPQ:500
HOOYA
Package:SMD,P=1mm
ECAD Model:
SMD, P=1mm
Pre-order
5,000
Factory Lead Time:5-6 weeks
25+
500+$0.0299
- +
Ext. Price(USD):$14.95
MOQ:500
Mult:500
SPQ:500
HOOYA
Package:SMD,P=1mm
ECAD Model:
SMD, P=1mm
Pre-order
10,000
Factory Lead Time:5-6 weeks
25+
1,000+$0.0548
- +
Ext. Price(USD):$54.80
MOQ:1,000
Mult:1,000
SPQ:1,000
HOOYA
Package:SMD,P=1.5mm
ECAD Model:
SMD, Pitch 1.5mm
Pre-order
5,000
Factory Lead Time:5-6 weeks
25+
500+$0.0307
- +
Ext. Price(USD):$15.35
MOQ:500
Mult:500
SPQ:500
HOOYA
Package:SMD,P=1.25mm
ECAD Model:
SMD, Pitch=1.25mm
Pre-order
5,000
Factory Lead Time:5-6 weeks
25+
500+$0.0349
- +
Ext. Price(USD):$17.45
MOQ:500
Mult:500
SPQ:500
HOOYA
Package:SMD,P=2mm
ECAD Model:
SMD, Pitch=2mm
Pre-order
10,000
Factory Lead Time:5-6 weeks
25+
1,000+$0.0636
- +
Ext. Price(USD):$63.60
MOQ:1,000
Mult:1,000
SPQ:1,000
HOOYA
Package:SMD,P=1.25mm
ECAD Model:
SMD, Pitch=1.25mm
Pre-order
10,000
Factory Lead Time:5-6 weeks
25+
1,000+$0.0396
- +
Ext. Price(USD):$39.60
MOQ:1,000
Mult:1,000
SPQ:1,000
HOOYA
Package:SMD,P=1.25mm
ECAD Model:
SMD, Pitch=1.25mm
Pre-order
10,000
Factory Lead Time:5-6 weeks
25+
1,000+$0.0416
- +
Ext. Price(USD):$41.60
MOQ:1,000
Mult:1,000
SPQ:1,000
HOOYA
Package:SMD,P=2.5mm
ECAD Model:
SMD, Pitch 2.5mm
Pre-order
5,000
Factory Lead Time:5-6 weeks
25+
500+$0.0398
- +
Ext. Price(USD):$19.90
MOQ:500
Mult:500
SPQ:500
HOOYA
Package:SMD,P=1.25mm
ECAD Model:
Pre-order
5,000
Factory Lead Time:5-6 weeks
25+
500+$0.0373
- +
Ext. Price(USD):$18.65
MOQ:500
Mult:500
SPQ:500
HOOYA
Package:SMD,P=2.5mm,Horizontal SMD
ECAD Model:
SMD, P=2.5mm, Horizontal Mount
Pre-order
10,000
Factory Lead Time:5-6 weeks
25+
1,000+$0.0785
- +
Ext. Price(USD):$78.50
MOQ:1,000
Mult:1,000
SPQ:1,000
HOOYA
Package:SMD,P=1.25mm
ECAD Model:
SMD, Pitch=1.25mm
Pre-order
5,000
Factory Lead Time:5-6 weeks
25+
500+$0.0373
- +
Ext. Price(USD):$18.65
MOQ:500
Mult:500
SPQ:500
HOOYA
Package:SMD,P=2.5mm
ECAD Model:
SMD, Pitch 2.5mm
Pre-order
5,000
Factory Lead Time:5-6 weeks
25+
500+$0.0436
- +
Ext. Price(USD):$21.80
MOQ:500
Mult:500
SPQ:500
HOOYA
Package:SMD,P=2mm
ECAD Model:
SMD, Pitch=2mm
Pre-order
10,000
Factory Lead Time:5-6 weeks
25+
1,000+$0.0536
- +
Ext. Price(USD):$53.60
MOQ:1,000
Mult:1,000
SPQ:1,000
HOOYA
Package:SMD,P=2mm
ECAD Model:
SMD, Pitch=2mm
Pre-order
10,000
Factory Lead Time:5-6 weeks
25+
1,000+$0.0722
- +
Ext. Price(USD):$72.20
MOQ:1,000
Mult:1,000
SPQ:1,000
25 / PageGoto