Wire splice terminals join conductors within a wiring assembly. Butt-crimp, insulation-displacement and multi-wire constructions create different connection arrangements, with insulation and conductor compatibility defined by each product family.
Connections between wires
A splice makes the electrical joint between conductors rather than terminating a wire at a stud or PCB. Different products support inline repairs, harness extensions or the connection of several wires. Their permitted conductor materials and combinations are part-specific; a splice intended for copper is not automatically suitable for aluminum.
Butt-crimp connections
Two wire ends enter an inline barrel and are secured by the specified crimp process. This construction is used in automotive, appliance and industrial wiring. Seamless, closed and brazed-barrel designs describe the conductive body; they remain separate from the choice of an insulating sleeve.
Insulation-displacement joints
An IDC contact establishes the connection through the wire insulation using its designed contact geometry. The conductor range and insulation construction must suit that system. A push-button IDC splice is therefore a different product from a butt connector whose wire preparation and barrel crimp are specified separately.
Multi-wire connection forms
Push-in and twist-on splice families provide other ways to bring conductors together. A twist-on design can use an internal spring to grip the specified wire combination. Push-in products have their own accepted conductor types and release arrangements; removability is a feature of the particular design, not of every splice.
Insulation belongs to the joint design
Butt-splice families include bare metal, rigid PVC, nylon and heat-shrink sleeve constructions. Funnel-entry forms help present the conductor to the barrel, while high-temperature products use separately specified materials. Sleeve type alone does not establish a universal environmental or temperature rating.
For the assembled joint, wire preparation, crimp geometry and the permitted conductor combination remain linked. A product supplied for automated termination may also have a different delivery format from a loose-piece repair connector.
Further reading: wire splice types and connection methods.