SSL Contacts
Results:SSL contacts are pin, socket and genderless electrical contacts used in solid-state lighting and LED connector systems. A valid contact selection must fit the specified connector series, conductor and termination process at the same time. Begin with the connector or housing part number, then qualify the contact against the wire, assembly tooling, material and production requirements.
SSL Contact Qualification Sheet
Complete the sections in order. A contact is qualified only when its connector fit, conductor fit and assembly process all agree.
Lock the Contact to Its Connector Family
Start from the connector or housing already specified in the lighting system. Contacts with similar dimensions can use different locking lances, insertion depths or mating geometries.
Use the manufacturer’s related-products list, application specification or connector drawing to identify the approved contact part number.
Define the Contact’s Mating Function
Contact gender describes the mating interface. It does not by itself confirm compatibility with a housing or connector series.
Match the Wire or PCB Interface
For wire-applied contacts, qualify the actual production wire—not only its nominal AWG value. For PCB-mounted contacts, use the manufacturer’s recommended footprint.
Select the Termination Route
The termination method determines the required preparation, machinery, inspection and repair process.
Match the crimp barrel to the wire and use the specified applicator or hand tool. Verify crimp height, conductor position and pull-force requirements.
Confirm pad layout, orientation, solderability, thermal profile and tape-and-reel presentation for automated assembly.
Match the conductor and insulation format and follow the specified wire placement and pressing procedure.
Confirm accepted wire construction, strip length, insertion direction, retention and the defined release method.
Confirm Material, Finish and Ratings
Review the contact as part of the complete mated connection under the actual LED lighting operating conditions.
- Contact material
- Confirm the specified copper alloy, phosphor bronze or other spring-contact material.
- Contact finish
- Match tin, gold or another finish, including the specified plated area and thickness where provided.
- Electrical rating
- Confirm current and voltage ratings for the selected wire, connector and operating temperature.
- Operating temperature
- Check the complete temperature range against heat produced by the LEDs, driver and surrounding enclosure.
Release the Contact to Production
The approved BOM entry should include the equipment and quality information needed to assemble the contact consistently.
- Save the contact and compatible housing part numbers together.
- Record the approved wire specification or PCB footprint.
- Specify the crimp applicator, hand tool or solder process.
- Define insertion, extraction and contact-retention requirements.
- Confirm loose-piece, reel or tape-and-reel packaging.
- Attach the applicable assembly and inspection specification.
Housing series and part number / Contact part number / Pin or socket / Wire gauge or PCB footprint / Termination / Tooling
For complete LED connector assemblies rather than individual contacts, browse Solid-State Lighting (SSL) Connectors.
Subscribe for promotions, market news, and platform updates.











