Special Pin Headers
Results:Special pin headers include board-mounted headers with pitch, pin length, insulator height, row layout, orientation or termination details that differ from standard configurations. Identify the special dimensional requirement first, then verify the complete drawing, PCB footprint, mating interface and assembly method before selecting a part.
Define What Is Special
A special pin header is usually selected when a standard header does not meet the required geometry or assembly conditions. The distinguishing feature may be an uncommon pitch, extended or asymmetric pins, a specific insulator height, a non-standard row arrangement, a special mounting orientation or a particular termination style.
- Uncommon contact pitch, row spacing or position count
- Extended, shortened or different mating and PCB tail lengths
- Specific insulator, standoff or board-to-board height
- Single-row, dual-row or application-specific pin layouts
- Vertical, right-angle, through-hole or surface-mount configurations
- Defined pin cross-section, plating or mating depth
Read the Header in Three Dimensional Zones
Instead of comparing only pitch and position count, divide the header drawing into three functional zones. This makes it easier to determine whether the part will fit both the PCB and its mating connector.
| Dimensional Zone | Parameters to Verify | Why It Matters |
|---|---|---|
| Mating Zone | Exposed post length, pin cross-section, plating and mating depth | Determines compatibility and electrical contact with the mating socket |
| Insulator Zone | Pitch, positions, rows, row spacing, body height and standoff | Controls connector layout, spacing and mechanical clearance |
| PCB Termination Zone | Tail length, hole or pad dimensions, mounting method and orientation | Defines PCB footprint and assembly compatibility |
Match the PCB and Mating Connector
Confirm pitch, number of positions, number of rows and row spacing against the PCB layout. For through-hole parts, check the finished hole diameter, board thickness and available solder-tail length. For surface-mount parts, verify the recommended pad pattern, coplanarity and component keepout area.
The mating side must accept the header’s pin dimensions and provide the required engagement depth. Use Male Pin Headers when a standard exposed male header is sufficient, or compare compatible Female Socket Headers when selecting the mating connector.
Check the Assembly Method
Select the termination method according to the PCB and manufacturing process. Through-hole headers provide mechanical retention and require compatible holes and solder tails. Surface-mount headers require suitable pads, stable seating and adequate coplanarity. Press-fit or pin-in-paste processing should be used only when specified by the manufacturer.
Also verify soldering temperature, packaging format, pick-and-place suitability and clearance for assembly tooling. See the PCB Pin Header Selection Guide for additional guidance on pitch, orientation, mounting and pin-length selection.
Choose the Correct Connector Path
- Choose standard male pin headers for conventional exposed-pin configurations.
- Choose female socket headers for the corresponding receptacle or mating side.
- Consider Board Stacking Connectors for pass-through pins, elevated boards or defined board-to-board spacing.
- Use special pin headers when the application depends on a specific pin length, height, pitch, row layout, orientation or termination geometry.
Create a Dimension-Controlled BOM
Record the manufacturer part number, pitch, positions, rows, row spacing, orientation, termination style, mating-post length, PCB-tail length, insulator height, contact plating, mating part, footprint and packaging. Compare the manufacturer drawing rather than relying only on the general product description, especially when replacing an existing special pin header.
Subscribe for promotions, market news, and platform updates.











