Solid-State Lighting (SSL) Connectors

Results:

Solid-state lighting (SSL) connectors provide power and, where required, control-signal connections within LED and other solid-state lighting systems. Products in this category support wire-to-board, board-to-board, wire-to-wire and modular lighting connections. Begin by locating the connection inside the luminaire, then compare its electrical load, positions, mounting, termination, wire or PCB interface and operating environment.

Locate the Connection Inside the Luminaire

Different connection zones create different requirements for installation, routing, profile and environmental protection. Identify the zone before choosing a connector style.

Power source
LED Driver
→
Connection zone 1
Wire-to-Board Input
→
Light source
LED PCB
→
Connection zone 2
Next LED Module
Operating environment
Electrical load Available height Assembly method Heat exposure Moisture and dust Service access

Choose the Interconnect Style

Select a connector style according to the two components being joined and how the lighting assembly will be manufactured or serviced.

Driver or cable to PCB

Wire-to-Board

Use for connecting power or control wiring to an LED board. Compare wire gauge, wire-entry direction, termination method and field-installation requirements.

LED PCB to LED PCB

Board-to-Board

Use for joining LED boards or light strips. Check pitch, PCB orientation, board spacing, profile and the mechanical alignment of both boards.

Cable to remote module

Wire-to-Wire

Use when the LED module is separated from the driver or another module. Match the plug, receptacle, contacts, wire range and locking arrangement.

Match the Electrical Requirements

Determine what must pass through the connector and confirm the rating of the complete mated system. Power-only and controllable lighting systems may require different numbers of circuits.

Number of positions Allow for power, return and any dimming, sensing or control circuits required by the lighting design.
Voltage rating Confirm the connector rating exceeds the maximum operating voltage specified for the circuit.
Current rating Check the current per contact under the manufacturer’s specified wire, PCB and temperature conditions.
Polarity and keying Use polarized or keyed interfaces where reverse connection could damage the LED module or driver.

Match the Wire or PCB Interface

The selected connector must fit the conductors and the available PCB area without blocking LEDs, optics, heat-spreading features or enclosure components.

Wire gauge Match the supported conductor range, insulation diameter and wire preparation.
Pitch and positions Confirm the complete contact pattern and available PCB routing space.
Entry direction Choose top, side or right-angle entry according to wire routing and enclosure clearance.
Connector profile Check the mated height and distance from nearby LEDs, optics and covers.

Choose Mounting and Termination

Mounting type defines how the connector is installed on the PCB, while termination defines how the wire or mating component is secured.

PCB Side

Surface mount Through-hole Straight Right-angle

Verify the recommended footprint, solder process, orientation and assembly height.

Wire Side

Poke-in wire Crimp Solder Plug and receptacle

Check wire preparation, required tooling, retention and whether field disconnection is needed.

Check the Lighting Environment

Lighting connectors may operate close to LEDs, drivers, heat sinks or outdoor enclosures. Evaluate the connector under the actual thermal and environmental conditions of the luminaire.

✓ Operating temperature range ✓ Distance from LEDs and heat sources ✓ Indoor or outdoor installation ✓ Moisture and dust exposure ✓ UV exposure where applicable ✓ Required locking or sealing feature ✓ Expected connection and service cycles ✓ Applicable safety requirements

Record the Complete SSL Connection

Keep the lighting-system location and connector specification together so that electrical, mechanical and environmental requirements remain visible during sourcing.

SSL connection record
Connection zone | Interconnect style | Positions and ratings | Wire or PCB format | Environment

For SSL contacts, accessories and other lighting connection components, browse Lighting Connectors.

Read More
Solid-State Lighting (SSL) ConnectorsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Contact PIN Crimp ST Thru-Hole 22-24AWG T/R
In Stock72,566
2606+
10+$0.0948
100+$0.0699
5,000+$0.0501
10,000+$0.0458
- +
Ext. Price(USD):$0.94
MOQ:10
Mult:10
SPQ:15,000
Hirose Gold Plated Crimp Terminal Male Contact, DF59 Series, Max 0.3mm²
In Stock7,555
2543+
1+$0.091
10+$0.0758
100+$0.07
500+$0.065
1,000+$0.0607
- +
Ext. Price(USD):$0.09
MOQ:1
Mult:1
SPQ:10,000
Single Contact Type Crimp Contact PIN
In Stock9,824
2610+
1+$0.0851
10+$0.0696
100+$0.0638
500+$0.0589
1,000+$0.0547
- +
Ext. Price(USD):$0.08
MOQ:1
Mult:1
SPQ:15,000
Hirose Connector Housing, 2-Way, 2mm Pitch, 1 Row
In Stock100
2407+
5+$0.1435
50+$0.1402
200+$0.138
- +
Ext. Price(USD):$0.71
MOQ:5
Mult:1
SPQ:100
Hirose Connector Housing, 3-Way, 2mm Pitch, 1 Row
In Stock2,000
2229+
1+$0.2012
10+$0.1606
500+$0.1095
1,000+$0.1054
- +
Ext. Price(USD):$0.20
MOQ:1
Mult:1
SPQ:100
Conn Wire to Board PL 3 POS 2mm Crimp ST Cable Mount Tray
Available Stock
82
Estimated Ship Time:4-6 working days
1+$0.5515
- +
Ext. Price(USD):$0.55
MOQ:1
Mult:1
SPQ:1
Hirose DF59 Series, 2mm Pitch, 3-Pin Receptacle, Board-to-Board/Wire-to-Board, Right Angle, SMD
Available Stock
50
Estimated Ship Time:5-7 working days
1+$0.6417
- +
Ext. Price(USD):$0.64
MOQ:1
Mult:1
SPQ:2,000
Hirose Electric
Package:SMD,P=2mm
ECAD Model:
Hirose 2mm Pitch 2-Pin Single Row Receptacle, Board-to-Board/Wire-to-Board, DF59 Series, Right Angle, SMD
Available Stock
500
Estimated Ship Time:5-7 working days
1+$0.4861
- +
Ext. Price(USD):$0.48
MOQ:1
Mult:1
SPQ:2,000
Hirose DF59 Series Board-to-Board Connector, 2mm Pitch, 4-Pin Receptacle, Right Angle, Surface Mount
Available Stock
297
Estimated Ship Time:5-7 working days
1+$0.6805
- +
Ext. Price(USD):$0.68
MOQ:1
Mult:1
SPQ:2,000
Hirose Connector Housing, 4-Pos, 2mm Pitch, 1 Row
Available Stock
708
Estimated Ship Time:4-6 working days
1+$0.2279
100+$0.2096
- +
Ext. Price(USD):$0.22
MOQ:1
Mult:1
SPQ:1
Conn Wire to Board M 4 POS 2mm Crimp ST Cable Mount Tray
Available Stock
350
Estimated Ship Time:9-14 working days
10+$2.0693
25+$1.9392
1,000+$1.4947
2,500+$1.4011
- +
Ext. Price(USD):$26.90
MOQ:13
Mult:1
SPQ:1
Available Stock
32,713
Estimated Ship Time:6-13 working days
25+$0.2162
100+$0.2151
2,500+$0.1588
10,000+$0.1566
- +
Ext. Price(USD):$14.05
MOQ:65
Mult:1
SPQ:1
Wire-to-Board Connector, 3 Pos, 2mm Pitch, Solder, Straight, SMD, Tray
Available Stock
100
Estimated Ship Time:9-14 working days
10+$1.3846
25+$1.2977
1,000+$1.0002
2,500+$0.9376
- +
Ext. Price(USD):$26.30
MOQ:19
Mult:1
SPQ:1
CONN SSL PLUG 4POS 2MM SHORT PIN
Available Stock
87
Estimated Ship Time:9-14 working days
10+$1.8155
25+$1.7016
50+$1.6202
- +
Ext. Price(USD):$27.23
MOQ:15
Mult:1
SPQ:1
Contact SKT Solder RA SMD Reel
Available Stock
800
Estimated Ship Time:9-14 working days
50+$0.3216
100+$0.3062
250+$0.287
500+$0.2733
- +
Ext. Price(USD):$26.04
MOQ:81
Mult:1
SPQ:1
CONN SSL SOCKET CONTACT SOLDER
Available Stock
8,330
Estimated Ship Time:9-14 working days
100+$0.2574
250+$0.2413
500+$0.2297
1,000+$0.2187
2,500+$0.205
- +
Ext. Price(USD):$26.25
MOQ:102
Mult:1
SPQ:1
Conn Board to Board RCP 2 POS 2mm Solder ST SMD T/R
Available Stock
1,833
Estimated Ship Time:9-14 working days
25+$0.8605
50+$0.8193
500+$0.6963
1,000+$0.6631
- +
Ext. Price(USD):$26.67
MOQ:31
Mult:1
SPQ:1
Available Stock
10,500
Estimated Ship Time:6-13 working days
25+$0.2438
100+$0.1633
5,000+$0.1156
10,000+$0.1102
- +
Ext. Price(USD):$14.14
MOQ:58
Mult:1
SPQ:1
Hirose Board-to-Board Lighting Connector, DF59 Series
Available Stock
611
Estimated Ship Time:9-14 working days
10+$1.4936
25+$1.3997
1,000+$1.0787
2,500+$1.0112
- +
Ext. Price(USD):$26.88
MOQ:18
Mult:1
SPQ:1
Wire-to-Board Connector PL 2 Pos 2mm ST Cable Mount Tray
Available Stock
239
Estimated Ship Time:6-13 working days
1+$1.679
10+$1.4375
2,500+$0.9072
5,000+$0.8921
- +
Ext. Price(USD):$15.11
MOQ:9
Mult:1
SPQ:1
CONN SSL BRIDGE 1POS B-TO-B
Available Stock
4,947
Estimated Ship Time:9-14 working days
50+$0.467
100+$0.4446
1,000+$0.3778
2,500+$0.3542
- +
Ext. Price(USD):$26.15
MOQ:56
Mult:1
SPQ:1
25 / PageGoto