Solid-State Lighting (SSL) Connectors

Results:

Solid-state lighting (SSL) connectors provide power and, where required, control-signal connections within LED and other solid-state lighting systems. Products in this category support wire-to-board, board-to-board, wire-to-wire and modular lighting connections. Begin by locating the connection inside the luminaire, then compare its electrical load, positions, mounting, termination, wire or PCB interface and operating environment.

Locate the Connection Inside the Luminaire

Different connection zones create different requirements for installation, routing, profile and environmental protection. Identify the zone before choosing a connector style.

Power source
LED Driver
→
Connection zone 1
Wire-to-Board Input
→
Light source
LED PCB
→
Connection zone 2
Next LED Module
Operating environment
Electrical load Available height Assembly method Heat exposure Moisture and dust Service access

Choose the Interconnect Style

Select a connector style according to the two components being joined and how the lighting assembly will be manufactured or serviced.

Driver or cable to PCB

Wire-to-Board

Use for connecting power or control wiring to an LED board. Compare wire gauge, wire-entry direction, termination method and field-installation requirements.

LED PCB to LED PCB

Board-to-Board

Use for joining LED boards or light strips. Check pitch, PCB orientation, board spacing, profile and the mechanical alignment of both boards.

Cable to remote module

Wire-to-Wire

Use when the LED module is separated from the driver or another module. Match the plug, receptacle, contacts, wire range and locking arrangement.

Match the Electrical Requirements

Determine what must pass through the connector and confirm the rating of the complete mated system. Power-only and controllable lighting systems may require different numbers of circuits.

Number of positions Allow for power, return and any dimming, sensing or control circuits required by the lighting design.
Voltage rating Confirm the connector rating exceeds the maximum operating voltage specified for the circuit.
Current rating Check the current per contact under the manufacturer’s specified wire, PCB and temperature conditions.
Polarity and keying Use polarized or keyed interfaces where reverse connection could damage the LED module or driver.

Match the Wire or PCB Interface

The selected connector must fit the conductors and the available PCB area without blocking LEDs, optics, heat-spreading features or enclosure components.

Wire gauge Match the supported conductor range, insulation diameter and wire preparation.
Pitch and positions Confirm the complete contact pattern and available PCB routing space.
Entry direction Choose top, side or right-angle entry according to wire routing and enclosure clearance.
Connector profile Check the mated height and distance from nearby LEDs, optics and covers.

Choose Mounting and Termination

Mounting type defines how the connector is installed on the PCB, while termination defines how the wire or mating component is secured.

PCB Side

Surface mount Through-hole Straight Right-angle

Verify the recommended footprint, solder process, orientation and assembly height.

Wire Side

Poke-in wire Crimp Solder Plug and receptacle

Check wire preparation, required tooling, retention and whether field disconnection is needed.

Check the Lighting Environment

Lighting connectors may operate close to LEDs, drivers, heat sinks or outdoor enclosures. Evaluate the connector under the actual thermal and environmental conditions of the luminaire.

✓ Operating temperature range ✓ Distance from LEDs and heat sources ✓ Indoor or outdoor installation ✓ Moisture and dust exposure ✓ UV exposure where applicable ✓ Required locking or sealing feature ✓ Expected connection and service cycles ✓ Applicable safety requirements

Record the Complete SSL Connection

Keep the lighting-system location and connector specification together so that electrical, mechanical and environmental requirements remain visible during sourcing.

SSL connection record
Connection zone | Interconnect style | Positions and ratings | Wire or PCB format | Environment

For SSL contacts, accessories and other lighting connection components, browse Lighting Connectors.

Read More
Solid-State Lighting (SSL) ConnectorsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
CONN TERM RCPT 3POS SCREW
Available Stock
100
Estimated Ship Time:9-14 working days
25+$0.7811
50+$0.7437
1,000+$0.6019
2,600+$0.5626
- +
Ext. Price(USD):$26.55
MOQ:34
Mult:1
SPQ:1
CONN TERM RCPT 5POS SCREW
Available Stock
1,730
Estimated Ship Time:9-14 working days
10+$1.3932
25+$1.3059
2,000+$0.9583
4,000+$0.9126
- +
Ext. Price(USD):$26.47
MOQ:19
Mult:1
SPQ:1
CONN TERM RCPT 2POS SCREW
Available Stock
2,120
Estimated Ship Time:9-14 working days
25+$0.5581
50+$0.5316
1,000+$0.4302
2,500+$0.4033
- +
Ext. Price(USD):$26.23
MOQ:47
Mult:1
SPQ:1
CONN LED 1POS W/O MOULD SMT
Available Stock
2,826
Estimated Ship Time:9-14 working days
100+$0.1296
250+$0.1214
500+$0.1156
1,000+$0.1101
- +
Ext. Price(USD):$26.04
MOQ:201
Mult:1
SPQ:1
CONN LED 1POS W/ MOULDING SMT
Available Stock
25,650
Estimated Ship Time:9-14 working days
100+$0.1832
250+$0.1716
500+$0.1634
1,000+$0.1556
- +
Ext. Price(USD):$26.01
MOQ:142
Mult:1
SPQ:1
CONN 2POS SCREW LED 162 SERIES
Available Stock
1,421
Estimated Ship Time:9-14 working days
25+$0.6826
50+$0.6499
1,000+$0.526
2,600+$0.4917
- +
Ext. Price(USD):$26.62
MOQ:39
Mult:1
SPQ:1
CONN LED 1POS W/ MOULDING SMT
Available Stock
1,340
Estimated Ship Time:9-14 working days
25+$0.5957
50+$0.5672
100+$0.54
250+$0.5061
- +
Ext. Price(USD):$26.21
MOQ:44
Mult:1
SPQ:1
CONN TERM RCPT 3POS SCREW
Available Stock
448
Estimated Ship Time:9-14 working days
25+$0.9768
50+$0.9301
1,000+$0.7527
2,600+$0.7036
- +
Ext. Price(USD):$26.37
MOQ:27
Mult:1
SPQ:1
CONN PLUG 2POS SCREW PNLMT
Available Stock
223
Estimated Ship Time:9-14 working days
10+$1.2096
25+$1.134
1,000+$0.8737
2,500+$0.819
- +
Ext. Price(USD):$26.61
MOQ:22
Mult:1
SPQ:1
CONN LUMINAIRE 3POLE W/PRNT
Available Stock
705
Estimated Ship Time:9-14 working days
25+$0.8005
50+$0.762
1,000+$0.6167
2,500+$0.5781
- +
Ext. Price(USD):$26.41
MOQ:33
Mult:1
SPQ:1
CONN TERM RCPT 2POS SCREW
Available Stock
808
Estimated Ship Time:9-14 working days
25+$0.6899
50+$0.6571
1,000+$0.5317
2,500+$0.4984
- +
Ext. Price(USD):$26.21
MOQ:38
Mult:1
SPQ:1
CONN TERM RCPT 12POS SCREW
Available Stock
49
Estimated Ship Time:9-14 working days
1+$4.2012
10+$3.5716
1,000+$2.5803
2,500+$2.4189
- +
Ext. Price(USD):$29.40
MOQ:7
Mult:1
SPQ:1
CONN LUMINAIRE 3POLE W/PRNT
Available Stock
1,421
Estimated Ship Time:9-14 working days
25+$0.8005
50+$0.762
1,000+$0.6167
2,500+$0.5781
- +
Ext. Price(USD):$26.41
MOQ:33
Mult:1
SPQ:1
CONN LUMINAIRE 5POLE W/PRNT
Available Stock
50
Estimated Ship Time:9-14 working days
10+$1.2539
25+$1.175
50+$1.1189
- +
Ext. Price(USD):$26.33
MOQ:21
Mult:1
SPQ:1
CONN TERM RCPT 5POS SCREW
Available Stock
5,093
Estimated Ship Time:9-14 working days
10+$1.728
25+$1.6191
1,000+$1.2479
2,500+$1.1698
- +
Ext. Price(USD):$27.64
MOQ:16
Mult:1
SPQ:1
CONN LUMINAIRE 3POLE W/PRNT
Available Stock
999
Estimated Ship Time:9-14 working days
25+$0.7245
50+$0.6897
1,000+$0.5581
2,500+$0.5231
- +
Ext. Price(USD):$26.08
MOQ:36
Mult:1
SPQ:1
Solid state lighting connector 2 Location socket,Poke-In line Board-to-cable/wire 0.157"(4.00mm) welding
Available Stock
69,641
Estimated Ship Time:9-14 working days
50+$0.2922
100+$0.2783
250+$0.2608
500+$0.2484
- +
Ext. Price(USD):$26.00
MOQ:89
Mult:1
CONN LED 3POS W/ MOULDING SMT
Available Stock
275
Estimated Ship Time:9-14 working days
10+$1.4299
25+$1.3401
50+$1.2759
100+$1.2149
- +
Ext. Price(USD):$27.16
MOQ:19
Mult:1
SPQ:1
CONN TERM PLUG 5POS SCREW
Available Stock
241
Estimated Ship Time:9-14 working days
10+$1.3489
25+$1.2645
1,000+$0.9743
2,500+$0.9133
- +
Ext. Price(USD):$26.97
MOQ:20
Mult:1
SPQ:1
CONN TERM RCPT 5POS SCREW
Available Stock
566
Estimated Ship Time:9-14 working days
10+$1.3932
25+$1.3059
1,000+$1.0063
2,500+$0.9433
- +
Ext. Price(USD):$26.47
MOQ:19
Mult:1
SPQ:1
CONN PLUG 5POS SCREW W/STRAIN
Available Stock
9
Estimated Ship Time:9-14 working days
1+$6.37
- +
Ext. Price(USD):$31.85
MOQ:5
Mult:1
SPQ:1
CONN TERM PLUG 5POS SCREW
Available Stock
2,631
Estimated Ship Time:9-14 working days
10+$1.9732
25+$1.849
1,000+$1.4251
2,500+$1.3359
- +
Ext. Price(USD):$27.62
MOQ:14
Mult:1
SPQ:1
Terminal Block, 2 Pole, Voltage Rating 450V
Available Stock
1,140
Estimated Ship Time:5-10 working days
10+$5.0475
- +
Ext. Price(USD):$50.47
MOQ:10
Mult:10
25 / PageGoto