Coaxial Connectors & Components

Results:

Select RF coaxial connectors by mating interface, system impedance and cable or PCB termination. Confirm the connector family and contact configuration before comparing frequency ratings and mounting details.

Specify both ends of the connector

Mating end: the interface it joins

Identify the connector family on the equipment or mating cable, such as SMA, BNC, N-Type, MCX or MMCX. Compare the specified interface and coupling style, then confirm the plug or jack designation and center-contact configuration.

For SMA connections, check whether the required interface is standard or reverse polarity against the manufacturer's interface drawing. Record this separately from the mounting style.

Use the coaxial connector types and selection guide when identifying an unfamiliar interface.

If two existing ports need an interface conversion, compare RF Adapters with both mating interfaces specified.

Termination end: the cable or board

For a cable connection, match the exact cable type or approved cable group. Check its dimensions and construction against the connector's cable compatibility information, then verify the specified termination method and assembly instructions.

For a PCB connection, identify the required surface-mount, through-hole or end-launch arrangement. Compare the manufacturer's recommended footprint and mounting dimensions with the board design.

Specify the orientation and mounting arrangement independently of the mating interface. A connector family name alone does not define the cable termination or PCB mounting geometry.

Does the RF rating cover your operating band?

Confirm the required system impedance, such as 50 Ω or 75 Ω, against the selected connector and cable specifications.

Check the exact part's frequency range and specified VSWR or return loss over your operating band. Use the applicable cable or PCB configuration when reviewing RF performance; connector configurations can have different limits within the same family.

Read More
Coaxial Connectors & ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Interface Connector, Type 43 Plug, Coaxial Connector, Cable Mount, 75Ω Impedance, Crimp Termination, For BT 3002 Cable
Available Stock
227
Estimated Ship Time:5-10 working days
1+$4.3719
5+$4.2827
10+$4.1807
25+$4.0788
50+$3.9513
- +
Ext. Price(USD):$8.74
MOQ:2
Mult:1
Interface Connector, Type 43 Receptacle, Coaxial, 2100 Series, Cable Mount, 75Ω, Crimp Termination, For BT 3002
Available Stock
141
Estimated Ship Time:5-10 working days
1+$7.3545
5+$7.1251
- +
Ext. Price(USD):$7.35
MOQ:1
Mult:1
25 / PageGoto