Rectangular connector housings organize and protect contacts in wire-to-wire, wire-to-board and selected panel-mounted connections. Begin with the manufacturer series and specified mating connector, then match the housing by positions, rows, pitch, mounting arrangement, keying and the contacts required for the intended wire.
Place the Housing Within the Connector System
A housing is normally one part of an assembled connection. Product contents vary by series, so confirm whether contacts, locks, seals and other components are included or ordered separately.
Mating interface
PCB header, plug, receptacle or mating housing specified for the series
→
Housing
Insulating body that positions the contacts and provides keying and retention
→
→
Retention and sealing
Secondary locks, seals, cavity plugs or strain-relief parts required by the assembly
Use the Series as the Compatibility Key
| Known information |
Housing detail to confirm |
Compatibility question resolved |
| Existing housing part number |
Manufacturer, series and product revision |
Identifies the correct product family and dimensional drawing |
| Mating connector or header |
Specified mating part, plug or receptacle form and keying |
Confirms mechanical mating, polarization and latch engagement |
| Contact part number |
Pin or socket type, contact size and retention design |
Confirms that the contact can be inserted and retained in the housing |
| Harness or equipment layout |
Positions, rows, pitch, mounting and wire-exit direction |
Confirms cavity arrangement and available installation space |
Housings with the same pitch and number of positions may use different contact cavities, keys, latches or mating geometry. Use the complete manufacturer part number and series documentation rather than appearance alone.
Translate the Harness into Housing Requirements
Mechanical arrangement
- Total positions, populated cavities and number of rows
- Pitch and contact arrangement specified by the series
- Free-hanging, wire, panel or related mounting structure
- Housing dimensions, wire-exit direction and available clearance
Mating and retention
- Plug or receptacle form and contact gender
- Polarization, keying and primary latch design
- Required terminal-position or connection-position locks
- Seals, cavity plugs and other series-specific accessories
Complete the Contact-and-Housing Combination
Match each housing to contacts that support the intended conductor size, insulation diameter, termination method and contact plating. Also confirm the specified insertion, extraction and crimp tooling. The wiring harness connector guide explains the roles of housings, terminals, keying and secondary locks in crimped harness assemblies.
Final datasheet check: verify the housing, mating connector, contacts, locks and seals as one manufacturer-defined system. Electrical and environmental ratings apply only under the conditions stated for the exact components and completed assembly.