Rectangular Connector Contacts

Results:

Rectangular connector contacts include separately ordered pins, sockets and crimp terminals for compatible connector housings. Begin with the manufacturer series and housing part number, then match the cavity, contact gender, wire range, termination, plating and application tooling. Similar appearance or wire size alone does not establish compatibility.

Lock the Housing Series Before Selecting a Contact

The housing determines which contact family and retention geometry can be used. Follow the approved compatibility path instead of selecting a terminal from its shape alone.

Manufacturer series → Housing part number → Cavity and contact size → Pin or socket → Approved contact

Use the housing datasheet or application specification to find the compatible contact part number. The same connector series may use different contacts for conductor size, insulation diameter, plating, sealing or production packaging. If the housing has not been selected, start with Rectangular Connector Housings.

Match Both Ends of the Contact

Each contact must fit the mating interface, lock into the correct housing cavity and accept the intended wire. Record all three interfaces before comparing stock or pricing.

Contact section What must match Fields to verify
Mating end The opposite conductive contact Pin, socket or non-gendered type; contact size and finish
Housing interface The cavity and retention system Series, cavity size, locking lance and insertion direction
Wire end The conductor and insulation AWG or cross-sectional area, conductor type and insulation diameter
Termination area The specified assembly process Crimp, solder, press-fit or other manufacturer-approved method

For a complete PCB header, wire housing and terminal combination, compare the available Wire to Board Connectors and verify every component against the same product series.

Choose the Contact Construction and Packaging

Contact form Selection focus
Stamped and formed Wire and insulation range, open-barrel geometry, reel format and specified crimp die
Machined or solid Contact size, conductor range, electrical load and dedicated tooling
Loose-piece packaging Prototype, service or manual assembly requirements
Reel or strip packaging Applicator compatibility, feed direction, carrier pitch and production quantity

Match the Wire, Finish and Electrical Load

  1. Confirm the complete conductor range in AWG or square millimetres.
  2. Check conductor stranding and the permitted insulation outside diameter.
  3. Compare contact material, tin or gold finish, and any specified plating thickness.
  4. Verify current rating under the stated wire, contact and temperature conditions.
  5. Check operating temperature, mating durability, vibration and environmental exposure.
Contact finish should be evaluated as part of the complete mating pair. Confirm that both sides use finishes approved by the connector manufacturer for the required environment and mating life.

Include Tooling in the Contact Selection

For crimp contacts, identify the manufacturer-specified hand tool or applicator, locator, die set, strip length and crimp-height requirements. Production inspection may also include conductor position, insulation support, bellmouth, pull force and contact deformation.

After termination, insert the contact in the specified direction until its retention feature locks into the housing. Use the approved extraction tool when removal is required. The guide to connector pins, crimping, soldering and IDC provides additional guidance on termination methods and crimp inspection.

Create a Contact Procurement Record

Record the housing series and part number, contact part number, pin or socket type, wire range, insulation diameter, termination, plating, packaging and required tooling. This provides a more reliable basis for replacement and production sourcing than appearance or wire size alone.

If the required interface or connector family has not yet been determined, return to the broader Rectangular Connectors range before selecting individual contacts.

Read More
Rectangular Connector ContactsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Samtec
ECAD Model:
Connector Headers & PCB Receptacles, Crimp, Gold Plated, 26-30 AWG, Wire Mount, 17.42mm L
Available Stock
89,027
Estimated Ship Time:6-13 working days
10+$0.2369
100+$0.2116
5,000+$0.162
15,300+$0.1296
- +
Ext. Price(USD):$14.21
MOQ:60
Mult:1
SPQ:1
Marked Crimp Terminal, 76nm, Gold, 26-30 AWG, Press-Fit
Available Stock
8,169
Estimated Ship Time:6-13 working days
1+$0.1955
50,000+$0.1663
- +
Ext. Price(USD):$14.07
MOQ:72
Mult:1
SPQ:1
Connector Discrete Wire Housing, Crimp, 250nm Gold, 32-34 AWG, Wire Mount
Available Stock
61,440
Estimated Ship Time:6-13 working days
100+$0.1334
500+$0.1221
8,000+$0.0918
24,000+$0.0896
- +
Ext. Price(USD):$14.00
MOQ:105
Mult:1
SPQ:1
Marked Crimp Terminal, Gold Plated 250nm 28-30 AWG Push-In 10.76mm L
Available Stock
161,355
Estimated Ship Time:6-13 working days
1+$0.1495
17,000+$0.1069
34,000+$0.1058
- +
Ext. Price(USD):$14.05
MOQ:94
Mult:1
SPQ:1
Samtec
ECAD Model:
Samtec Gold-Plated Crimp Pin, T1M74 Series, Solder Mount
Available Stock
22,568
Estimated Ship Time:6-13 working days
1+$0.2645
- +
Ext. Price(USD):$14.01
MOQ:53
Mult:1
SPQ:1
Samtec
ECAD Model:
Marked Crimp Terminal, Gold Plated, 20-24 AWG, Push-In
Available Stock
17,836
Estimated Ship Time:6-13 working days
1+$0.207
14,000+$0.1944
42,000+$0.1933
- +
Ext. Price(USD):$14.07
MOQ:68
Mult:1
SPQ:1
Samtec Crimp Terminal, Female Contact, CC79R Series
Available Stock
41,456
Estimated Ship Time:6-13 working days
10+$0.2542
100+$0.2312
500+$0.2156
- +
Ext. Price(USD):$14.23
MOQ:56
Mult:1
SPQ:1
Samtec
ECAD Model:
Samtec Crimp Terminal, CC83L Series
Available Stock
7,345
Estimated Ship Time:7-9 working days
24+
600+$0.1694
- +
Ext. Price(USD):$101.64
MOQ:600
Mult:1
SPQ:1
Samtec Crimp Terminal, Female Contact, CC69R Series
Available Stock
469,972
Estimated Ship Time:6-13 working days
10+$0.2415
100+$0.2162
5,000+$0.1717
12,000+$0.1544
- +
Ext. Price(USD):$14.00
MOQ:58
Mult:1
SPQ:1
Power Crimp Terminal, Tin Plated, 24-26 AWG, Push-In Mount
Available Stock
393
Estimated Ship Time:6-13 working days
1+$0.736
12,000+$0.5486
- +
Ext. Price(USD):$14.72
MOQ:20
Mult:1
SPQ:1
Marked Crimp Terminal Gold 24-26 AWG Push-In
Available Stock
4,628
Estimated Ship Time:6-13 working days
1+$0.207
- +
Ext. Price(USD):$14.07
MOQ:68
Mult:1
SPQ:1
Marked Crimp Terminal, Gold Plated, 250nm, 28-30 AWG, Press-Fit
Available Stock
3,207
Estimated Ship Time:9-14 working days
50+$0.3577
100+$0.3406
1,000+$0.2895
2,500+$0.2714
- +
Ext. Price(USD):$26.11
MOQ:73
Mult:1
SPQ:1
Samtec Crimp Terminal, T1M44 Series
Available Stock
45,128
Estimated Ship Time:6-13 working days
10+$0.268
100+$0.2369
10,000+$0.1512
25,000+$0.1501
- +
Ext. Price(USD):$14.20
MOQ:53
Mult:1
SPQ:1
Samtec
ECAD Model:
Samtec Gold Plated Crimp Terminal, CC83L Series
Available Stock
8,177
Estimated Ship Time:6-13 working days
1+$0.2645
21,000+$0.2462
- +
Ext. Price(USD):$14.01
MOQ:53
Mult:1
SPQ:1
Rectangular Connector Contact, Crimp, 76nm, Gold, 28-30 AWG, Press-In
Available Stock
2,543
Estimated Ship Time:9-14 working days
100+$0.1703
250+$0.1596
500+$0.152
1,000+$0.1447
2,500+$0.1356
- +
Ext. Price(USD):$26.05
MOQ:153
Mult:1
SPQ:1
Samtec
ECAD Model:
Crimp, 76nm Gold, 28-30 AWG
Available Stock
19,042
Estimated Ship Time:6-13 working days
10+$0.2116
100+$0.1898
500+$0.1727
1,000+$0.1382
2,000+$0.1328
- +
Ext. Price(USD):$14.17
MOQ:67
Mult:1
SPQ:1
Samtec
ECAD Model:
Marked Crimp Terminal, Gold Plated, 24-26 AWG, Push-In, 10.99mm L × 2.15mm H
Available Stock
14,147
Estimated Ship Time:6-13 working days
10+$0.1679
100+$0.1507
2,500+$0.1188
7,000+$0.0961
- +
Ext. Price(USD):$14.10
MOQ:84
Mult:1
SPQ:1
Samtec
ECAD Model:
Marked Crimp Terminal, Gold Plated, 26-30 AWG, Press-In
Available Stock
5,047
Estimated Ship Time:6-13 working days
1+$0.207
- +
Ext. Price(USD):$14.07
MOQ:68
Mult:1
SPQ:1
Marked Crimp Gold 28-30 AWG Push-In
Available Stock
147,508
Estimated Ship Time:9-14 working days
100+$0.1501
250+$0.1407
500+$0.134
1,000+$0.1276
2,500+$0.1196
- +
Ext. Price(USD):$26.11
MOQ:174
Mult:1
SPQ:1
Samtec
ECAD Model:
Samtec Gold-Plated Crimp Pin, T1M74 Series, Solder Mount
Available Stock
66,744
Estimated Ship Time:6-13 working days
10+$0.3531
100+$0.3058
10,000+$0.2614
28,000+$0.2538
- +
Ext. Price(USD):$14.12
MOQ:40
Mult:1
SPQ:1
25 / PageGoto