Rectangular Connector Contacts

Results:

Rectangular connector contacts include separately ordered pins, sockets and crimp terminals for compatible connector housings. Begin with the manufacturer series and housing part number, then match the cavity, contact gender, wire range, termination, plating and application tooling. Similar appearance or wire size alone does not establish compatibility.

Lock the Housing Series Before Selecting a Contact

The housing determines which contact family and retention geometry can be used. Follow the approved compatibility path instead of selecting a terminal from its shape alone.

Manufacturer series → Housing part number → Cavity and contact size → Pin or socket → Approved contact

Use the housing datasheet or application specification to find the compatible contact part number. The same connector series may use different contacts for conductor size, insulation diameter, plating, sealing or production packaging. If the housing has not been selected, start with Rectangular Connector Housings.

Match Both Ends of the Contact

Each contact must fit the mating interface, lock into the correct housing cavity and accept the intended wire. Record all three interfaces before comparing stock or pricing.

Contact section What must match Fields to verify
Mating end The opposite conductive contact Pin, socket or non-gendered type; contact size and finish
Housing interface The cavity and retention system Series, cavity size, locking lance and insertion direction
Wire end The conductor and insulation AWG or cross-sectional area, conductor type and insulation diameter
Termination area The specified assembly process Crimp, solder, press-fit or other manufacturer-approved method

For a complete PCB header, wire housing and terminal combination, compare the available Wire to Board Connectors and verify every component against the same product series.

Choose the Contact Construction and Packaging

Contact form Selection focus
Stamped and formed Wire and insulation range, open-barrel geometry, reel format and specified crimp die
Machined or solid Contact size, conductor range, electrical load and dedicated tooling
Loose-piece packaging Prototype, service or manual assembly requirements
Reel or strip packaging Applicator compatibility, feed direction, carrier pitch and production quantity

Match the Wire, Finish and Electrical Load

  1. Confirm the complete conductor range in AWG or square millimetres.
  2. Check conductor stranding and the permitted insulation outside diameter.
  3. Compare contact material, tin or gold finish, and any specified plating thickness.
  4. Verify current rating under the stated wire, contact and temperature conditions.
  5. Check operating temperature, mating durability, vibration and environmental exposure.
Contact finish should be evaluated as part of the complete mating pair. Confirm that both sides use finishes approved by the connector manufacturer for the required environment and mating life.

Include Tooling in the Contact Selection

For crimp contacts, identify the manufacturer-specified hand tool or applicator, locator, die set, strip length and crimp-height requirements. Production inspection may also include conductor position, insulation support, bellmouth, pull force and contact deformation.

After termination, insert the contact in the specified direction until its retention feature locks into the housing. Use the approved extraction tool when removal is required. The guide to connector pins, crimping, soldering and IDC provides additional guidance on termination methods and crimp inspection.

Create a Contact Procurement Record

Record the housing series and part number, contact part number, pin or socket type, wire range, insulation diameter, termination, plating, packaging and required tooling. This provides a more reliable basis for replacement and production sourcing than appearance or wire size alone.

If the required interface or connector family has not yet been determined, return to the broader Rectangular Connectors range before selecting individual contacts.

Read More
Rectangular Connector ContactsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Marked, Crimp, Gold Plated, 16-18 AWG, Push-In
Available Stock
599
Estimated Ship Time:9-14 working days
1+$4.3524
10+$3.7012
250+$2.9482
500+$2.8091
- +
Ext. Price(USD):$26.11
MOQ:6
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles Crimp 1.27μm Gold 22-26 AWG Press-Fit
Available Stock
21,448
Estimated Ship Time:6-13 working days
10+$0.8395
25+$0.7498
2,500+$0.526
5,000+$0.486
- +
Ext. Price(USD):$14.27
MOQ:17
Mult:1
SPQ:1
Amphenol
ECAD Model:
Crimped Terminal, 0.127mm Gold, 10-12 AWG, Push-In
Available Stock
100
Estimated Ship Time:7-9 working days
19+
88+$1.254
- +
Ext. Price(USD):$110.35
MOQ:88
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles, Crimp, Tin Plated, 28-32 AWG, Press-In
Available Stock
4,877
Estimated Ship Time:6-13 working days
25+$0.2714
5,000+$0.1361
10,000+$0.122
- +
Ext. Price(USD):$14.11
MOQ:52
Mult:1
SPQ:1
Available Stock
7,250
Estimated Ship Time:6-13 working days
250+$0.0345
1,000+$0.0297
2,500+$0.0275
5,000+$0.0259
10,000+$0.0248
- +
Ext. Price(USD):$14.00
MOQ:406
Mult:1
SPQ:1
Power to the Board Crimp Terminal, Tin-Plated, 16-22 AWG, Press-In, 16.8mm L × 3.7mm H
Available Stock
13,080
Estimated Ship Time:6-13 working days
100+$0.1185
250+$0.107
1,000+$0.0935
2,500+$0.0864
- +
Ext. Price(USD):$14.10
MOQ:119
Mult:1
SPQ:1
Amphenol Communications Solutions Crimp Terminal, Female Contact, Series 10161952
Available Stock
18,487
Estimated Ship Time:6-13 working days
250+$0.0541
1,000+$0.0495
2,500+$0.0454
10,000+$0.041
- +
Ext. Price(USD):$14.01
MOQ:259
Mult:1
SPQ:1
Connector Headers & PCB Receptacles Crimp, 2.54μm Pitch, Tin, Wire Mount
Available Stock
65,000
Estimated Ship Time:7-9 working days
20+
13,000+$0.077
26,000+$0.0759
39,000+$0.0693
- +
Ext. Price(USD):$1,001.00
MOQ:13,000
Mult:13,000
SPQ:13,000
Amphenol
ECAD Model:
Connector Headers/Receptacles, Crimp, Tin-Plated, 22-26 AWG, Press-Fit
Available Stock
79,295
Estimated Ship Time:6-13 working days
25+$0.322
100+$0.2926
5,000+$0.2192
10,000+$0.2074
- +
Ext. Price(USD):$14.16
MOQ:44
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles, Crimp, 1μm Gold Plated, 22-26 AWG, Press-Fit
Available Stock
630
Estimated Ship Time:6-13 working days
25+$0.4899
100+$0.4235
5,000+$0.2851
10,000+$0.2743
- +
Ext. Price(USD):$14.20
MOQ:29
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles Crimp 1.9μm Gold 22-26 AWG Wire Mount 11.68mm × 3.53mm
Available Stock
500
Estimated Ship Time:5-12 working days
50+$0.6061
250+$0.5539
8,000+$0.4845
15,000+$0.4747
- +
Ext. Price(USD):$30.30
MOQ:50
Mult:1
SPQ:1,000
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles, Crimp, Gold, 22-26 AWG, Press-Fit
Available Stock
20,311
Estimated Ship Time:6-13 working days
10+$0.7038
25+$0.6486
5,000+$0.445
10,000+$0.4396
- +
Ext. Price(USD):$14.07
MOQ:20
Mult:1
SPQ:1
Amphenol
ECAD Model:
Circular Connector, Screw Mount, Silver Plated, Wire Mount
Available Stock
500
Estimated Ship Time:9-14 working days
1+$5.6052
10+$4.7585
1,000+$3.4381
2,500+$3.2231
- +
Ext. Price(USD):$28.02
MOQ:5
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles, Crimp, 380nm, Gold, 18-20 AWG, Press-Fit
Available Stock
2,834
Estimated Ship Time:6-13 working days
25+$0.2599
100+$0.2392
2,500+$0.1739
10,000+$0.162
- +
Ext. Price(USD):$14.03
MOQ:54
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles, Crimp, Tin Plated, 28-32 AWG, Press-In
Available Stock
76,629
Estimated Ship Time:6-13 working days
25+$0.245
100+$0.2369
5,000+$0.175
10,000+$0.1674
- +
Ext. Price(USD):$14.21
MOQ:58
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers & PCB Receptacles, Crimp, 2μm Tin Plated, 20-22 AWG, Press-Fit
Available Stock
11,979
Estimated Ship Time:6-13 working days
100+$0.1127
250+$0.1047
5,000+$0.0875
10,000+$0.0853
- +
Ext. Price(USD):$14.08
MOQ:125
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers/PCB Receptacles Crimp 760nm Gold 18-20 AWG Press-In
Available Stock
673
Estimated Ship Time:6-13 working days
10+$0.6946
25+$0.6176
5,000+$0.3607
10,000+$0.3424
- +
Ext. Price(USD):$14.58
MOQ:21
Mult:1
SPQ:1
Minitek® 3.0 Connector System, Wire-to-Board Receptacle Crimp Terminal, Pre-Plated
Available Stock
30,000
Estimated Ship Time:7-10 working days
24+
10,000+$0.2211
30,000+$0.2211
- +
Ext. Price(USD):$2,211.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Amphenol
ECAD Model:
Connector Headers & PCB Receptacles, Crimp, Tin, 22-26 AWG, Wire Mount, 13.97mm L × 3.53mm H
Available Stock
19,003
Estimated Ship Time:6-13 working days
25+$0.4807
100+$0.407
5,000+$0.2678
10,000+$0.256
- +
Ext. Price(USD):$14.42
MOQ:30
Mult:1
SPQ:1
Crimp 12 AWG
Available Stock
10,648
Estimated Ship Time:6-13 working days
25+$0.2438
100+$0.2312
5,000+$0.1609
9,000+$0.1544
- +
Ext. Price(USD):$14.14
MOQ:58
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers & PCB Receptacles, Crimp, Gold, 20-22 AWG, Press-Fit, 11.56mm L × 2.4mm H
Available Stock
37,135
Estimated Ship Time:6-13 working days
25+$0.1679
100+$0.1599
5,000+$0.1177
10,000+$0.1048
- +
Ext. Price(USD):$14.10
MOQ:84
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Header, Crimp, Tin Plated, 18-20 AWG, Press-Fit, L11.68mm×H3.53mm
Available Stock
3,858
Estimated Ship Time:6-13 working days
25+$0.3289
100+$0.3058
250+$0.2871
1,000+$0.2754
- +
Ext. Price(USD):$14.14
MOQ:43
Mult:1
SPQ:1
Crimp, Gold, 16-18 AWG
Available Stock
6,922
Estimated Ship Time:6-13 working days
1+$3.4385
10+$2.904
1,000+$2.1924
2,500+$2.16
- +
Ext. Price(USD):$17.19
MOQ:5
Mult:1
SPQ:1
Amphenol
ECAD Model:
CONN SOCKET 11.1MM RADSOK ASSY
Available Stock
25
Estimated Ship Time:9-14 working days
1+$55.512
10+$47.1841
100+$40.1128
250+$37.6053
- +
Ext. Price(USD):$55.51
MOQ:1
Mult:1
SPQ:1
Amphenol
ECAD Model:
Mechanical Crimp Terminal, Silver, 10-12 AWG, Push-In
Available Stock
378
Estimated Ship Time:9-14 working days
10+$1.4558
25+$1.3647
1,000+$1.0518
3,000+$0.9734
- +
Ext. Price(USD):$26.20
MOQ:18
Mult:1
SPQ:1
25 / PageGoto