Rectangular Connector Contacts

Results:

Rectangular connector contacts include separately ordered pins, sockets and crimp terminals for compatible connector housings. Begin with the manufacturer series and housing part number, then match the cavity, contact gender, wire range, termination, plating and application tooling. Similar appearance or wire size alone does not establish compatibility.

Lock the Housing Series Before Selecting a Contact

The housing determines which contact family and retention geometry can be used. Follow the approved compatibility path instead of selecting a terminal from its shape alone.

Manufacturer series → Housing part number → Cavity and contact size → Pin or socket → Approved contact

Use the housing datasheet or application specification to find the compatible contact part number. The same connector series may use different contacts for conductor size, insulation diameter, plating, sealing or production packaging. If the housing has not been selected, start with Rectangular Connector Housings.

Match Both Ends of the Contact

Each contact must fit the mating interface, lock into the correct housing cavity and accept the intended wire. Record all three interfaces before comparing stock or pricing.

Contact section What must match Fields to verify
Mating end The opposite conductive contact Pin, socket or non-gendered type; contact size and finish
Housing interface The cavity and retention system Series, cavity size, locking lance and insertion direction
Wire end The conductor and insulation AWG or cross-sectional area, conductor type and insulation diameter
Termination area The specified assembly process Crimp, solder, press-fit or other manufacturer-approved method

For a complete PCB header, wire housing and terminal combination, compare the available Wire to Board Connectors and verify every component against the same product series.

Choose the Contact Construction and Packaging

Contact form Selection focus
Stamped and formed Wire and insulation range, open-barrel geometry, reel format and specified crimp die
Machined or solid Contact size, conductor range, electrical load and dedicated tooling
Loose-piece packaging Prototype, service or manual assembly requirements
Reel or strip packaging Applicator compatibility, feed direction, carrier pitch and production quantity

Match the Wire, Finish and Electrical Load

  1. Confirm the complete conductor range in AWG or square millimetres.
  2. Check conductor stranding and the permitted insulation outside diameter.
  3. Compare contact material, tin or gold finish, and any specified plating thickness.
  4. Verify current rating under the stated wire, contact and temperature conditions.
  5. Check operating temperature, mating durability, vibration and environmental exposure.
Contact finish should be evaluated as part of the complete mating pair. Confirm that both sides use finishes approved by the connector manufacturer for the required environment and mating life.

Include Tooling in the Contact Selection

For crimp contacts, identify the manufacturer-specified hand tool or applicator, locator, die set, strip length and crimp-height requirements. Production inspection may also include conductor position, insulation support, bellmouth, pull force and contact deformation.

After termination, insert the contact in the specified direction until its retention feature locks into the housing. Use the approved extraction tool when removal is required. The guide to connector pins, crimping, soldering and IDC provides additional guidance on termination methods and crimp inspection.

Create a Contact Procurement Record

Record the housing series and part number, contact part number, pin or socket type, wire range, insulation diameter, termination, plating, packaging and required tooling. This provides a more reliable basis for replacement and production sourcing than appearance or wire size alone.

If the required interface or connector family has not yet been determined, return to the broader Rectangular Connectors range before selecting individual contacts.

Read More
Rectangular Connector ContactsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Amphenol
ECAD Model:
Connector Headers & PCB Receptacles, Crimp, 1μm Gold Plated, 28-32 AWG, Press-Fit, 11.17mm L × 1.7mm H
Available Stock
10,000
Estimated Ship Time:7-10 working days
25+
10,000+$0.1474
- +
Ext. Price(USD):$1,474.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles Crimp 2.54μm Tin 28-32 AWG Press-Fit 11.68mm(L) × 2.92mm(H)
Available Stock
43,700
Estimated Ship Time:9-14 working days
100+$0.1178
250+$0.1104
500+$0.1051
1,000+$0.1001
2,500+$0.0939
- +
Ext. Price(USD):$26.03
MOQ:221
Mult:1
SPQ:1
Amphenol
ECAD Model:
Amphenol Communications Solutions Tin-Plated Crimp Terminal, Receptacle, DUBOX Series
Available Stock
8,002
Estimated Ship Time:5-12 working days
250+$0.1017
2,500+$0.0937
72,000+$0.086
108,000+$0.0854
- +
Ext. Price(USD):$30.00
MOQ:295
Mult:1
SPQ:36,000
Amphenol
ECAD Model:
Connector Headers/PCB Receptacles Crimp 2μm Tin 28-32 AWG Press-Fit 11.56mm(L) × 1.3mm(H)
Available Stock
14,860
Estimated Ship Time:6-13 working days
100+$0.1323
250+$0.1139
5,000+$0.0799
10,000+$0.0648
- +
Ext. Price(USD):$14.02
MOQ:106
Mult:1
SPQ:1
Minitek Micro Space Male CTW Tin Terminal, AWG22
Available Stock
9,790
Estimated Ship Time:6-13 working days
100+$0.1058
250+$0.0943
1,000+$0.0869
2,500+$0.0788
- +
Ext. Price(USD):$14.07
MOQ:133
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles Crimp 1.02μm Gold 28-32 AWG Press-In 11.68mm L × 2.92mm H
Available Stock
4,732
Estimated Ship Time:6-13 working days
25+$0.3393
100+$0.3091
5,000+$0.23
10,000+$0.2138
- +
Ext. Price(USD):$14.25
MOQ:42
Mult:1
SPQ:1
Amphenol
ECAD Model:
Amphenol FCI D-Sub Connector
Available Stock
20,291
Estimated Ship Time:6-13 working days
25+$0.5129
100+$0.4675
5,000+$0.351
10,000+$0.3305
- +
Ext. Price(USD):$14.36
MOQ:28
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles, Crimp, Gold, 18-20 AWG, Press-In, 11.68mm L × 3.53mm H
Available Stock
39,905
Estimated Ship Time:6-13 working days
25+$0.4589
100+$0.3883
5,000+$0.256
10,000+$0.2182
- +
Ext. Price(USD):$14.22
MOQ:31
Mult:1
SPQ:1
Circular MIL Spec Contacts, Gold Plated, 10 AWG to 12 AWG
Available Stock
843
Estimated Ship Time:6-13 working days
25+$0.4129
100+$0.3762
5,000+$0.2754
8,000+$0.2657
- +
Ext. Price(USD):$14.03
MOQ:34
Mult:1
SPQ:1
Connector Header, PCB Receptacle Crimp Tin 16-18 AWG Wire Mount 16.8mm × 2.9mm H
Available Stock
23,746
Estimated Ship Time:6-13 working days
250+$0.0311
2,500+$0.0275
5,000+$0.0198
10,000+$0.0184
- +
Ext. Price(USD):$14.02
MOQ:451
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers/PCB Receptacles Crimp 1.02μm Gold 22-26 AWG Press-Fit
Available Stock
17,978
Estimated Ship Time:6-13 working days
10+$0.7855
25+$0.7452
2,000+$0.5411
5,000+$0.5389
- +
Ext. Price(USD):$14.13
MOQ:18
Mult:1
SPQ:1
Available Stock
40
Estimated Ship Time:6-13 working days
1+$2.7715
10+$2.3575
- +
Ext. Price(USD):$16.62
MOQ:6
Mult:1
SPQ:1
4+12MINI, POWER PIN CONTACT(PLUG
Available Stock
2,263
Estimated Ship Time:9-14 working days
30+$0.8111
50+$0.7824
1,000+$0.6331
2,500+$0.5934
- +
Ext. Price(USD):$26.76
MOQ:33
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles Crimp 1.02μm Gold 28-32 AWG Press-In 11.68mm L × 2.92mm H
Available Stock
19,750
Estimated Ship Time:6-13 working days
10+$0.7889
25+$0.7211
1,000+$0.5324
10,000+$0.4039
- +
Ext. Price(USD):$14.20
MOQ:18
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers, PCB Receptacles, Crimp, 1μm Gold Plated, 22-26 AWG, Press-Fit, 11.17mm L × 1.7mm H
Available Stock
80
Estimated Ship Time:6-13 working days
25+$0.3715
100+$0.3135
5,000+$0.2063
10,000+$0.1912
- +
Ext. Price(USD):$14.11
MOQ:38
Mult:1
SPQ:1
Amphenol
ECAD Model:
Amphenol ICC Crimp Terminal, FLH-PC136-T01 Series
Available Stock
9,500
Estimated Ship Time:5-10 working days
50+$0.0699
500+$0.0617
1,250+$0.0553
2,500+$0.0477
- +
Ext. Price(USD):$6.99
MOQ:100
Mult:50
Marked, Crimp, Gold, 18-20 AWG, Press-Fit
Available Stock
3,771
Estimated Ship Time:9-14 working days
1+$5.0544
10+$4.293
250+$3.4205
500+$3.3048
- +
Ext. Price(USD):$30.32
MOQ:6
Mult:1
SPQ:1
Amphenol
ECAD Model:
PCB Receptacle, Crimp, 380nm, Gold, 28-32 AWG, Press-Fit
Available Stock
39,263
Estimated Ship Time:6-13 working days
25+$0.2001
100+$0.1863
2,500+$0.1447
10,000+$0.1436
- +
Ext. Price(USD):$14.00
MOQ:70
Mult:1
SPQ:1
Connector Headers & PCB Receptacles, Crimp, Gold, 24 AWG, Wire Mount, 12.85mm L × 1.7mm H
Available Stock
15,000
Estimated Ship Time:9-12 working days
15,000+$0.0788
45,000+$0.0787
- +
Ext. Price(USD):$1,182.00
MOQ:15,000
Mult:15,000
Connector Headers & PCB Receptacles, Crimp, Tin-Plated, 24-26 AWG, Wire Mount, 9.1mm L × 2.4mm H
Available Stock
29,230
Estimated Ship Time:6-13 working days
250+$0.0391
1,000+$0.033
2,500+$0.0319
5,000+$0.0259
10,000+$0.0238
- +
Ext. Price(USD):$14.03
MOQ:359
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers/PCB Receptacles Crimp 1.02μm Gold 22-26 AWG Press-Fit
Available Stock
9,636
Estimated Ship Time:6-13 working days
10+$0.7257
25+$0.6486
5,000+$0.4536
10,000+$0.418
- +
Ext. Price(USD):$14.51
MOQ:20
Mult:1
SPQ:1
Amphenol
ECAD Model:
Marked Crimp Terminal, 1.02μm Gold, 22-26 AWG, Press-Fit
Available Stock
10,000
Estimated Ship Time:7-9 working days
24+
10,000+$0.2024
40,000+$0.2024
- +
Ext. Price(USD):$2,024.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Amphenol Communications Solutions Crimp Terminal, Female Contact, Minitek Series
Available Stock
50,000
Estimated Ship Time:7-9 working days
21+
20,000+$0.0319
- +
Ext. Price(USD):$638.00
MOQ:20,000
Mult:20,000
SPQ:20,000
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles, Crimp, Gold, 22-26 AWG, Press-Fit
Available Stock
96,255
Estimated Ship Time:6-13 working days
25+$0.2507
100+$0.2392
5,000+$0.1728
10,000+$0.162
- +
Ext. Price(USD):$14.03
MOQ:56
Mult:1
SPQ:1
Amphenol
ECAD Model:
Crimp, Gold, 20-22 AWG
Available Stock
3,931
Estimated Ship Time:6-13 working days
25+$0.3646
100+$0.3311
4,000+$0.2311
8,000+$0.2236
- +
Ext. Price(USD):$14.21
MOQ:39
Mult:1
SPQ:1
25 / PageGoto