Rectangular Connector Contacts

Results:

Rectangular connector contacts include separately ordered pins, sockets and crimp terminals for compatible connector housings. Begin with the manufacturer series and housing part number, then match the cavity, contact gender, wire range, termination, plating and application tooling. Similar appearance or wire size alone does not establish compatibility.

Lock the Housing Series Before Selecting a Contact

The housing determines which contact family and retention geometry can be used. Follow the approved compatibility path instead of selecting a terminal from its shape alone.

Manufacturer series → Housing part number → Cavity and contact size → Pin or socket → Approved contact

Use the housing datasheet or application specification to find the compatible contact part number. The same connector series may use different contacts for conductor size, insulation diameter, plating, sealing or production packaging. If the housing has not been selected, start with Rectangular Connector Housings.

Match Both Ends of the Contact

Each contact must fit the mating interface, lock into the correct housing cavity and accept the intended wire. Record all three interfaces before comparing stock or pricing.

Contact section What must match Fields to verify
Mating end The opposite conductive contact Pin, socket or non-gendered type; contact size and finish
Housing interface The cavity and retention system Series, cavity size, locking lance and insertion direction
Wire end The conductor and insulation AWG or cross-sectional area, conductor type and insulation diameter
Termination area The specified assembly process Crimp, solder, press-fit or other manufacturer-approved method

For a complete PCB header, wire housing and terminal combination, compare the available Wire to Board Connectors and verify every component against the same product series.

Choose the Contact Construction and Packaging

Contact form Selection focus
Stamped and formed Wire and insulation range, open-barrel geometry, reel format and specified crimp die
Machined or solid Contact size, conductor range, electrical load and dedicated tooling
Loose-piece packaging Prototype, service or manual assembly requirements
Reel or strip packaging Applicator compatibility, feed direction, carrier pitch and production quantity

Match the Wire, Finish and Electrical Load

  1. Confirm the complete conductor range in AWG or square millimetres.
  2. Check conductor stranding and the permitted insulation outside diameter.
  3. Compare contact material, tin or gold finish, and any specified plating thickness.
  4. Verify current rating under the stated wire, contact and temperature conditions.
  5. Check operating temperature, mating durability, vibration and environmental exposure.
Contact finish should be evaluated as part of the complete mating pair. Confirm that both sides use finishes approved by the connector manufacturer for the required environment and mating life.

Include Tooling in the Contact Selection

For crimp contacts, identify the manufacturer-specified hand tool or applicator, locator, die set, strip length and crimp-height requirements. Production inspection may also include conductor position, insulation support, bellmouth, pull force and contact deformation.

After termination, insert the contact in the specified direction until its retention feature locks into the housing. Use the approved extraction tool when removal is required. The guide to connector pins, crimping, soldering and IDC provides additional guidance on termination methods and crimp inspection.

Create a Contact Procurement Record

Record the housing series and part number, contact part number, pin or socket type, wire range, insulation diameter, termination, plating, packaging and required tooling. This provides a more reliable basis for replacement and production sourcing than appearance or wire size alone.

If the required interface or connector family has not yet been determined, return to the broader Rectangular Connectors range before selecting individual contacts.

Read More
Rectangular Connector ContactsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Amphenol
ECAD Model:
Connector Headers/Receptacles Crimp 760nm Gold 28-32 AWG Press-Fit 11.68mm L × 2.92mm H
Available Stock
7,610
Estimated Ship Time:6-13 working days
25+$0.2507
100+$0.2392
5,000+$0.1577
10,000+$0.1566
- +
Ext. Price(USD):$14.03
MOQ:56
Mult:1
SPQ:1
Contacts, Headers & Wire Housings Crimp 2μm Tin 16-20 AWG
Available Stock
26,550
Estimated Ship Time:6-13 working days
250+$0.0345
1,000+$0.0308
2,500+$0.0286
5,000+$0.0248
- +
Ext. Price(USD):$14.00
MOQ:406
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles Crimp 1.02μm Gold 28-32 AWG Press-In 11.68mm L × 2.92mm H
Available Stock
28,469
Estimated Ship Time:9-14 working days
50+$0.4905
100+$0.4671
1,000+$0.397
3,000+$0.3673
- +
Ext. Price(USD):$26.48
MOQ:54
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles, Crimp, Gold Plated, 18-20 AWG, Press-Fit, 11.68mm L × 3.53mm H
Available Stock
38,759
Estimated Ship Time:6-13 working days
25+$0.2254
100+$0.2151
5,000+$0.1544
10,000+$0.1501
- +
Ext. Price(USD):$14.20
MOQ:63
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles, Crimp, Gold, 18-20 AWG, Press-In, 11.68mm L × 3.53mm H
Available Stock
120
Estimated Ship Time:6-13 working days
25+$0.4543
100+$0.3916
5,000+$0.2646
10,000+$0.2538
- +
Ext. Price(USD):$14.08
MOQ:31
Mult:1
SPQ:1
Amphenol
ECAD Model:
PCB Receptacle, Crimp, 380nm, Gold, 28-32 AWG, Press-Fit
Available Stock
22,668
Estimated Ship Time:9-14 working days
50+$0.3562
100+$0.339
1,000+$0.2881
3,000+$0.2666
- +
Ext. Price(USD):$26.00
MOQ:73
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers & PCB Receptacles Crimp, Gold Plated 1.9μm, 28-32 AWG Press-In
Available Stock
2,998
Estimated Ship Time:6-13 working days
10+$0.6785
25+$0.6061
5,000+$0.4212
10,000+$0.4201
- +
Ext. Price(USD):$14.24
MOQ:21
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles, Crimp, 380nm, Gold, 18-20 AWG, Press-Fit
Available Stock
9,115
Estimated Ship Time:6-13 working days
10+$0.7176
25+$0.6567
5,000+$0.3748
10,000+$0.3564
- +
Ext. Price(USD):$14.35
MOQ:20
Mult:1
SPQ:1
Marked Crimp Terminal, Tin Plated, 32 AWG, Push-In Mount
Available Stock
42,749
Estimated Ship Time:9-14 working days
250+$0.068
500+$0.0647
1,000+$0.0616
2,500+$0.0577
- +
Ext. Price(USD):$26.04
MOQ:383
Mult:1
SPQ:1
Connector Headers & PCB Receptacles, Crimp, 2.54μm Tin, 22-24 AWG, Press-In
Available Stock
632
Estimated Ship Time:9-14 working days
250+$0.0696
500+$0.0663
1,000+$0.0631
2,500+$0.0592
- +
Ext. Price(USD):$26.03
MOQ:374
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles Crimp 1.02μm Gold 22-26 AWG Press-In 11.68mm L × 3.53mm H
Available Stock
21,355
Estimated Ship Time:6-13 working days
10+$0.8855
25+$0.7912
1,000+$0.6016
2,000+$0.5562
- +
Ext. Price(USD):$14.16
MOQ:16
Mult:1
SPQ:1
Available Stock
415,120
Estimated Ship Time:6-13 working days
100+$0.0966
250+$0.0863
5,000+$0.0702
10,000+$0.0659
- +
Ext. Price(USD):$14.00
MOQ:145
Mult:1
SPQ:1
Power Connector, Crimp, Gold, 16-22 AWG, Push-In
Available Stock
1,508
Estimated Ship Time:6-13 working days
100+$0.1231
250+$0.1058
5,000+$0.0734
12,000+$0.0637
- +
Ext. Price(USD):$14.03
MOQ:114
Mult:1
SPQ:1
Amphenol
ECAD Model:
Mechanical Crimp Terminal, Silver, 10-12 AWG, Push-In
Available Stock
1,109
Estimated Ship Time:6-13 working days
1+$2.3805
10+$2.024
1,000+$1.3068
2,000+$1.2636
- +
Ext. Price(USD):$14.28
MOQ:6
Mult:1
SPQ:1
Available Stock
39,576
Estimated Ship Time:6-13 working days
100+$0.1093
250+$0.0966
1,000+$0.088
2,500+$0.081
10,000+$0.0799
- +
Ext. Price(USD):$14.09
MOQ:129
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles Crimp 1.02μm Gold 28-32 AWG Press-In 11.68mm L × 2.92mm H
Available Stock
3,015
Estimated Ship Time:9-14 working days
100+$0.2523
250+$0.2364
500+$0.2251
1,000+$0.2144
2,500+$0.2009
- +
Ext. Price(USD):$26.23
MOQ:104
Mult:1
SPQ:1
Available Stock
46,165
Estimated Ship Time:6-13 working days
250+$0.0541
1,000+$0.0484
2,500+$0.0454
10,000+$0.04
- +
Ext. Price(USD):$14.01
MOQ:259
Mult:1
SPQ:1
Amphenol
ECAD Model:
Amphenol Communications Solutions Tin-Plated Crimp Terminal, Receptacle, DUBOX Series
Available Stock
6,000
Estimated Ship Time:7-10 working days
22+
1,000+$0.11
3,000+$0.1089
5,500+$0.1067
- +
Ext. Price(USD):$110.00
MOQ:1,000
Mult:500
SPQ:500
Power Connector, Crimp, Gold, 16-22 AWG, Push-In
Available Stock
28,634
Estimated Ship Time:6-13 working days
100+$0.1012
250+$0.0909
5,000+$0.0702
12,000+$0.068
- +
Ext. Price(USD):$14.06
MOQ:139
Mult:1
SPQ:1
Amphenol
ECAD Model:
Mechanism Crimp Terminal, Tin Plated, 10-12 AWG, Push-In
Available Stock
1,632
Estimated Ship Time:6-13 working days
10+$1.311
25+$1.221
2,000+$0.8338
5,000+$0.8262
- +
Ext. Price(USD):$14.42
MOQ:11
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles, Crimp, Tin Plated, 28-32 AWG, Press-In
Available Stock
23,838
Estimated Ship Time:6-13 working days
100+$0.1265
250+$0.1111
5,000+$0.0886
10,000+$0.0864
- +
Ext. Price(USD):$14.04
MOQ:111
Mult:1
SPQ:1
Amphenol
ECAD Model:
11.1MM PIN CONTACT ASM 70MM2
Available Stock
64
Estimated Ship Time:9-14 working days
1+$28.1448
10+$23.9188
250+$19.0611
500+$18.1526
- +
Ext. Price(USD):$28.14
MOQ:1
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles, Crimp, 1.27μm Gold Plated, 28-32 AWG, Press-In
Available Stock
23,480
Estimated Ship Time:6-13 working days
10+$0.8062
25+$0.7199
5,000+$0.4698
8,000+$0.4374
- +
Ext. Price(USD):$14.51
MOQ:18
Mult:1
SPQ:1
Marked Crimp Terminal, 2.03μm Tin, 16-20 AWG, Press-Fit
Available Stock
11,746
Estimated Ship Time:6-13 working days
25+$0.1576
100+$0.1403
5,000+$0.0842
12,000+$0.068
- +
Ext. Price(USD):$14.02
MOQ:89
Mult:1
SPQ:1
Amphenol
ECAD Model:
Circular Connector Crimp Terminal Gold Plated 14-16 AWG Wire Mount
Available Stock
444
Estimated Ship Time:6-13 working days
1+$2.7025
10+$2.4495
2,600+$1.7172
5,000+$1.7064
- +
Ext. Price(USD):$16.21
MOQ:6
Mult:1
SPQ:1
25 / PageGoto