Rectangular Connector Contacts

Results:

Rectangular connector contacts include separately ordered pins, sockets and crimp terminals for compatible connector housings. Begin with the manufacturer series and housing part number, then match the cavity, contact gender, wire range, termination, plating and application tooling. Similar appearance or wire size alone does not establish compatibility.

Lock the Housing Series Before Selecting a Contact

The housing determines which contact family and retention geometry can be used. Follow the approved compatibility path instead of selecting a terminal from its shape alone.

Manufacturer series → Housing part number → Cavity and contact size → Pin or socket → Approved contact

Use the housing datasheet or application specification to find the compatible contact part number. The same connector series may use different contacts for conductor size, insulation diameter, plating, sealing or production packaging. If the housing has not been selected, start with Rectangular Connector Housings.

Match Both Ends of the Contact

Each contact must fit the mating interface, lock into the correct housing cavity and accept the intended wire. Record all three interfaces before comparing stock or pricing.

Contact section What must match Fields to verify
Mating end The opposite conductive contact Pin, socket or non-gendered type; contact size and finish
Housing interface The cavity and retention system Series, cavity size, locking lance and insertion direction
Wire end The conductor and insulation AWG or cross-sectional area, conductor type and insulation diameter
Termination area The specified assembly process Crimp, solder, press-fit or other manufacturer-approved method

For a complete PCB header, wire housing and terminal combination, compare the available Wire to Board Connectors and verify every component against the same product series.

Choose the Contact Construction and Packaging

Contact form Selection focus
Stamped and formed Wire and insulation range, open-barrel geometry, reel format and specified crimp die
Machined or solid Contact size, conductor range, electrical load and dedicated tooling
Loose-piece packaging Prototype, service or manual assembly requirements
Reel or strip packaging Applicator compatibility, feed direction, carrier pitch and production quantity

Match the Wire, Finish and Electrical Load

  1. Confirm the complete conductor range in AWG or square millimetres.
  2. Check conductor stranding and the permitted insulation outside diameter.
  3. Compare contact material, tin or gold finish, and any specified plating thickness.
  4. Verify current rating under the stated wire, contact and temperature conditions.
  5. Check operating temperature, mating durability, vibration and environmental exposure.
Contact finish should be evaluated as part of the complete mating pair. Confirm that both sides use finishes approved by the connector manufacturer for the required environment and mating life.

Include Tooling in the Contact Selection

For crimp contacts, identify the manufacturer-specified hand tool or applicator, locator, die set, strip length and crimp-height requirements. Production inspection may also include conductor position, insulation support, bellmouth, pull force and contact deformation.

After termination, insert the contact in the specified direction until its retention feature locks into the housing. Use the approved extraction tool when removal is required. The guide to connector pins, crimping, soldering and IDC provides additional guidance on termination methods and crimp inspection.

Create a Contact Procurement Record

Record the housing series and part number, contact part number, pin or socket type, wire range, insulation diameter, termination, plating, packaging and required tooling. This provides a more reliable basis for replacement and production sourcing than appearance or wire size alone.

If the required interface or connector family has not yet been determined, return to the broader Rectangular Connectors range before selecting individual contacts.

Read More
Rectangular Connector ContactsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Connector Headers and PCB Receptacles Crimp 760nm Gold 22 AWG Wire Mount 12.85mm L × 1.7mm H
Available Stock
10,437
Estimated Ship Time:5-9 working days
22+
10+$0.084
50+$0.0796
150+$0.0783
- +
Ext. Price(USD):$0.84
MOQ:10
Mult:5
SPQ:15,000
Amphenol
ECAD Model:
Connector Headers & PCB Receptacles, Wire Mount, 18.2mm L × 2.92mm H
Pre-order
8,000,000
Factory Lead Time:13 weeks
16,000+$0.5066
- +
Ext. Price(USD):$8,105.60
MOQ:16,000
Mult:8,000
SPQ:8,000
Amphenol
ECAD Model:
HC Terminal Contact, 20-22AWG
Available Stock
4,985
Estimated Ship Time:3-5 working days
26+
1+$0.2312
1,500+$0.1734
3,000+$0.1156
- +
Ext. Price(USD):$0.23
MOQ:1
Mult:1
SPQ:3,000
Amphenol
ECAD Model:
Circular Connector, Screw Mount, Silver Plated, Wire Mount
Available Stock
580
Estimated Ship Time:6-12 working days
10+$2.2
25+$2.112
500+$1.9008
2,500+$1.9008
- +
Ext. Price(USD):$24.20
MOQ:11
Mult:1
Terminal Crimp Gold Plated 16-20 AWG Push-In
Pre-order
12,000,000
Factory Lead Time:15 weeks
24,000+$0.0905
- +
Ext. Price(USD):$2,172.00
MOQ:24,000
Mult:24,000
SPQ:12,000
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles Crimp 1.27μm Gold Plated 22-26 AWG Press-Fit 18.2mm L × 3.53mm H
Pre-order
8,000,000
Factory Lead Time:13 weeks
16,000+$0.8443
- +
Ext. Price(USD):$13,508.80
MOQ:16,000
Mult:8,000
SPQ:8,000
Marked, Crimp, Gold Plated, 16-18 AWG, Push-In
Available Stock
3,135
Estimated Ship Time:6-12 working days
10+$1.25
25+$1.25
1,000+$1.08
2,500+$1.08
- +
Ext. Price(USD):$25.00
MOQ:20
Mult:1
Amphenol
ECAD Model:
Connector Headers & PCB Receptacles, Crimp, Gold Plated, 22-26 AWG, Press-Fit, 18.2mm L × 3.53mm H
Pre-order
8,000,000
Factory Lead Time:13 weeks
16,000+$0.3551
- +
Ext. Price(USD):$5,681.60
MOQ:16,000
Mult:8,000
SPQ:8,000
Amphenol
ECAD Model:
Connector Headers/Receptacles, Crimp, Tin-Plated, 22-26 AWG, Press-Fit
Available Stock
5
Estimated Ship Time:4-6 working days
25+
1+$0.0704
- +
Ext. Price(USD):$0.07
MOQ:1
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles Crimp 2.54μm Tin 18-20 AWG Press-In 3.53mm H
Pre-order
48,000,000
Factory Lead Time:14 weeks
96,000+$0.1044
- +
Ext. Price(USD):$10,022.40
MOQ:96,000
Mult:8,000
SPQ:8,000
Amphenol
ECAD Model:
Connector Headers/PCB Receptacles, Crimp, 760nm, Gold Plated, 28-32 AWG, Press-Fit
Pre-order
100,000
Factory Lead Time:10-16 weeks
24+
10,000+$0.2047
20,000+$0.1993
- +
Ext. Price(USD):$2,047.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles, Crimp, Gold Plated, 18-20 AWG, Press-Fit, 11.68mm L × 3.53mm H
Pre-order
20,000,000
Factory Lead Time:12 weeks
40,000+$0.2211
- +
Ext. Price(USD):$8,844.00
MOQ:40,000
Mult:1,000
SPQ:1,000
Terminals, Wire Terminals, Gold Plated, 16 AWG
Pre-order
12,000,000
Factory Lead Time:15 weeks
24,000+$0.6894
- +
Ext. Price(USD):$16,545.60
MOQ:24,000
Mult:24,000
SPQ:12,000
Connector Headers & PCB Receptacles, Crimp, 2.03μm Tin, 20-24 AWG, Push-In, 12.4mm L × 2.5mm H
Pre-order
15,000,000
Factory Lead Time:15 weeks
30,000+$0.0279
- +
Ext. Price(USD):$837.00
MOQ:30,000
Mult:30,000
SPQ:30,000
Amphenol
ECAD Model:
Connector Headers & PCB Receptacles Crimp 2.54μm Tin 18-20 AWG Wire Mount 160mm H
Pre-order
30,000,000
Factory Lead Time:12 weeks
60,000+$0.0871
- +
Ext. Price(USD):$5,226.00
MOQ:60,000
Mult:10,000
SPQ:10,000
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles Crimp 1.02μm Gold 28-32 AWG Press-In 11.68mm L × 2.92mm H
Pre-order
12,500,000
Factory Lead Time:11 weeks
25,000+$0.141
- +
Ext. Price(USD):$3,525.00
MOQ:25,000
Mult:1,000
SPQ:1,000
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles, Crimp, Gold, 18-20 AWG, Press-In, 11.68mm L × 3.53mm H
Available Stock
5,068
Estimated Ship Time:7-9 working days
19+
300+$0.2035
1,500+$0.1991
2,900+$0.1947
- +
Ext. Price(USD):$61.05
MOQ:300
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles, Crimp, 1μm Gold Plated, 22-26 AWG, Press-Fit
Pre-order
20,000,000
Factory Lead Time:12 weeks
40,000+$0.1776
- +
Ext. Price(USD):$7,104.00
MOQ:40,000
Mult:10,000
SPQ:10,000
Marked Crimp Tin 28-32 AWG Press-In
Available Stock
176,500
Estimated Ship Time:3-5 working days
26+
500+$0.022
600+$0.0212
700+$0.0207
- +
Ext. Price(USD):$11.00
MOQ:500
Mult:1
SPQ:600
Amphenol
ECAD Model:
Connector Headers PCB Receptacles Crimp 2.54μm Tin 22-26 AWG Press-In 11.68mm L × 3.53mm H
Available Stock
50
Estimated Ship Time:4-6 working days
1+$0.2592
- +
Ext. Price(USD):$0.25
MOQ:1
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers/Receptacles Crimp 1.02μm Gold 28-32 AWG Press-Fit
Pre-order
20,000,000
Factory Lead Time:12 weeks
40,000+$0.2385
- +
Ext. Price(USD):$9,540.00
MOQ:40,000
Mult:10,000
SPQ:10,000
Crimp, 16-18 AWG
Available Stock
1,950
Estimated Ship Time:4-6 working days
1+$0.5147
200+$0.4314
- +
Ext. Price(USD):$0.51
MOQ:1
Mult:1
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles, Crimp, 1μm Gold, 22-26 AWG, Press-In, 11.68mm L × 1.7mm H
Pre-order
10,000
Factory Lead Time:10-16 weeks
24+
1,000+$0.2918
2,000+$0.2842
- +
Ext. Price(USD):$291.80
MOQ:1,000
Mult:1,000
SPQ:1,000
Amphenol
ECAD Model:
Connector Terminal, Crimp, Gold Plated (1.02μm), 18-20 AWG, Press-In, 11.68mm L × 3.53mm H
Available Stock
449
Estimated Ship Time:7-9 working days
20+
304+$0.363
25,000+$0.363
- +
Ext. Price(USD):$110.35
MOQ:304
Mult:1
SPQ:1
Available Stock
10,841
Estimated Ship Time:6-13 working days
25+$0.4359
100+$0.3685
5,000+$0.243
10,000+$0.2333
- +
Ext. Price(USD):$14.38
MOQ:33
Mult:1
SPQ:1
25 / PageGoto