Rectangular Connector Contacts

Results:

Rectangular connector contacts include separately ordered pins, sockets and crimp terminals for compatible connector housings. Begin with the manufacturer series and housing part number, then match the cavity, contact gender, wire range, termination, plating and application tooling. Similar appearance or wire size alone does not establish compatibility.

Lock the Housing Series Before Selecting a Contact

The housing determines which contact family and retention geometry can be used. Follow the approved compatibility path instead of selecting a terminal from its shape alone.

Manufacturer series → Housing part number → Cavity and contact size → Pin or socket → Approved contact

Use the housing datasheet or application specification to find the compatible contact part number. The same connector series may use different contacts for conductor size, insulation diameter, plating, sealing or production packaging. If the housing has not been selected, start with Rectangular Connector Housings.

Match Both Ends of the Contact

Each contact must fit the mating interface, lock into the correct housing cavity and accept the intended wire. Record all three interfaces before comparing stock or pricing.

Contact section What must match Fields to verify
Mating end The opposite conductive contact Pin, socket or non-gendered type; contact size and finish
Housing interface The cavity and retention system Series, cavity size, locking lance and insertion direction
Wire end The conductor and insulation AWG or cross-sectional area, conductor type and insulation diameter
Termination area The specified assembly process Crimp, solder, press-fit or other manufacturer-approved method

For a complete PCB header, wire housing and terminal combination, compare the available Wire to Board Connectors and verify every component against the same product series.

Choose the Contact Construction and Packaging

Contact form Selection focus
Stamped and formed Wire and insulation range, open-barrel geometry, reel format and specified crimp die
Machined or solid Contact size, conductor range, electrical load and dedicated tooling
Loose-piece packaging Prototype, service or manual assembly requirements
Reel or strip packaging Applicator compatibility, feed direction, carrier pitch and production quantity

Match the Wire, Finish and Electrical Load

  1. Confirm the complete conductor range in AWG or square millimetres.
  2. Check conductor stranding and the permitted insulation outside diameter.
  3. Compare contact material, tin or gold finish, and any specified plating thickness.
  4. Verify current rating under the stated wire, contact and temperature conditions.
  5. Check operating temperature, mating durability, vibration and environmental exposure.
Contact finish should be evaluated as part of the complete mating pair. Confirm that both sides use finishes approved by the connector manufacturer for the required environment and mating life.

Include Tooling in the Contact Selection

For crimp contacts, identify the manufacturer-specified hand tool or applicator, locator, die set, strip length and crimp-height requirements. Production inspection may also include conductor position, insulation support, bellmouth, pull force and contact deformation.

After termination, insert the contact in the specified direction until its retention feature locks into the housing. Use the approved extraction tool when removal is required. The guide to connector pins, crimping, soldering and IDC provides additional guidance on termination methods and crimp inspection.

Create a Contact Procurement Record

Record the housing series and part number, contact part number, pin or socket type, wire range, insulation diameter, termination, plating, packaging and required tooling. This provides a more reliable basis for replacement and production sourcing than appearance or wire size alone.

If the required interface or connector family has not yet been determined, return to the broader Rectangular Connectors range before selecting individual contacts.

Read More
Rectangular Connector ContactsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Marked Crimp Terminal, 2.03μm Tin, 16-20 AWG, Press-Fit
Pre-order
12,000,000
Factory Lead Time:15 weeks
24,000+$0.0662
- +
Ext. Price(USD):$1,588.80
MOQ:24,000
Mult:24,000
SPQ:12,000
Amphenol
ECAD Model:
Connector Headers/Receptacles Crimp 1.02μm Gold 28-32 AWG Press-Fit
Available Stock
21,184
Estimated Ship Time:6-12 working days
25+$0.6525
50+$0.6525
1,000+$0.5638
2,500+$0.5638
- +
Ext. Price(USD):$24.14
MOQ:37
Mult:1
Amphenol
ECAD Model:
HC Terminal Contact, 20-22AWG
Available Stock
289
Estimated Ship Time:3-5 working days
26+
1+$0.2476
6,000+$0.1858
12,000+$0.1238
- +
Ext. Price(USD):$0.24
MOQ:1
Mult:1
SPQ:12,000
Contacts, Headers & Wire Housings Crimp 760nm Gold 20-24 AWG
Pre-order
20,000,000
Factory Lead Time:13 weeks
40,000+$0.1114
- +
Ext. Price(USD):$4,456.00
MOQ:40,000
Mult:40,000
SPQ:40,000
Amphenol
ECAD Model:
Connector Headers & PCB Receptacles Crimp 22-26 AWG Gold Plated 1.9μm Press-In
Pre-order
20,000,000
Factory Lead Time:12 weeks
40,000+$0.2002
- +
Ext. Price(USD):$8,008.00
MOQ:40,000
Mult:10,000
SPQ:10,000
Amphenol
ECAD Model:
Amphenol Connector
Available Stock
4
Estimated Ship Time:3-5 working days
26+
1+$0.165
1,500+$0.1238
3,000+$0.0826
- +
Ext. Price(USD):$0.16
MOQ:1
Mult:1
SPQ:3,000
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles Crimp 1.02μm Gold 28-32 AWG Press-In 11.68mm L × 2.92mm H
Pre-order
500,000
Factory Lead Time:12 weeks
1,000+$0.4109
- +
Ext. Price(USD):$821.80
MOQ:2,000
Mult:1,000
SPQ:1,000
Amphenol
ECAD Model:
Connector Terminal, Crimp, Gold Plated (1.02μm), 18-20 AWG, Press-In, 11.68mm L × 3.53mm H
Pre-order
20,000,000
Factory Lead Time:12 weeks
40,000+$0.2298
- +
Ext. Price(USD):$9,192.00
MOQ:40,000
Mult:10,000
SPQ:10,000
Connector Header/Receptacle, Crimp, 760nm, Gold Plated, 26-30 AWG, Press-Fit, 5.9mm L × 1.9mm H
Pre-order
200,000
Factory Lead Time:10-16 weeks
24+
20,000+$0.0749
40,000+$0.0729
- +
Ext. Price(USD):$1,498.00
MOQ:20,000
Mult:20,000
SPQ:20,000
Amphenol
ECAD Model:
Connector Headers & PCB Receptacles, Crimp, Gold, 28-32 AWG, Press-In, 11.56mm L × 1.3mm H
Pre-order
300,000
Factory Lead Time:10-16 weeks
24+
30,000+$0.0917
45,000+$0.0893
- +
Ext. Price(USD):$2,751.00
MOQ:30,000
Mult:15,000
SPQ:15,000
Connector Headers & PCB Receptacles, Crimp, Tin-Plated, 16-22 AWG, Push-In, 16.8mm L × 3.7mm H
Pre-order
12,000,000
Factory Lead Time:15 weeks
24,000+$0.0261
- +
Ext. Price(USD):$1,252.80
MOQ:48,000
Mult:24,000
SPQ:12,000
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles, Crimp, 1μm Gold, 22-26 AWG, Press-In, 11.68mm L × 1.7mm H
Pre-order
5,000,000
Factory Lead Time:12 weeks
10,000+$0.2472
- +
Ext. Price(USD):$2,472.00
MOQ:10,000
Mult:1,000
SPQ:1,000
Power Connector, Crimp, Gold, 16-22 AWG, Push-In
Pre-order
12,000,000
Factory Lead Time:15 weeks
24,000+$0.0731
- +
Ext. Price(USD):$1,754.40
MOQ:24,000
Mult:24,000
SPQ:12,000
Connector Headers and PCB Receptacles, Crimp, 203nm Gold, 26-30 AWG, Press-Fit
Pre-order
200,000
Factory Lead Time:10-16 weeks
24+
20,000+$0.0488
40,000+$0.0476
- +
Ext. Price(USD):$976.00
MOQ:20,000
Mult:20,000
SPQ:20,000
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles, Crimp, 380nm, Gold, 18-20 AWG, Press-Fit
Pre-order
5,000,000
Factory Lead Time:12 weeks
10,000+$0.3273
- +
Ext. Price(USD):$3,273.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Terminal Crimp Gold Plated 16-20 AWG Push-In
Pre-order
12,000,000
Factory Lead Time:15 weeks
24,000+$0.0992
- +
Ext. Price(USD):$2,380.80
MOQ:24,000
Mult:24,000
SPQ:12,000
Amphenol
ECAD Model:
Amphenol Communications Solutions Mini-PV Series Gold Plated Crimp Terminal Female Contact
Available Stock
63
Estimated Ship Time:4-6 working days
1+$0.3415
- +
Ext. Price(USD):$0.34
MOQ:1
Mult:1
SPQ:1
Amphenol
ECAD Model:
PCB Receptacle, Crimp, 760nm, Gold Plated, 22-26 AWG, Press-In
Pre-order
100,000
Factory Lead Time:10-16 weeks
24+
10,000+$0.2658
20,000+$0.2588
- +
Ext. Price(USD):$2,658.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Power Connector, Crimp, Gold, 16-22 AWG, Push-In
Pre-order
12,000,000
Factory Lead Time:15 weeks
24,000+$0.0574
- +
Ext. Price(USD):$1,377.60
MOQ:24,000
Mult:24,000
SPQ:12,000
Amphenol
ECAD Model:
Connector Terminal, Crimp, Gold Plated (1.02μm), 18-20 AWG, Press-In, 11.68mm L × 3.53mm H
Pre-order
20,000,000
Factory Lead Time:12 weeks
40,000+$0.1602
- +
Ext. Price(USD):$6,408.00
MOQ:40,000
Mult:10,000
SPQ:10,000
Terminal Crimp Gold Plated 16-20 AWG Push-In
Pre-order
6,000,000
Factory Lead Time:15 weeks
12,000+$0.0905
- +
Ext. Price(USD):$1,086.00
MOQ:12,000
Mult:12,000
SPQ:12,000
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles Crimp 2.54μm Tin 28-32 AWG Press-Fit 11.68mm(L) × 2.92mm(H)
Pre-order
12,500,000
Factory Lead Time:12 weeks
25,000+$0.2054
- +
Ext. Price(USD):$5,135.00
MOQ:25,000
Mult:1,000
SPQ:1,000
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles Crimp 2.54μm Tin 28-32 AWG Wire Mount 2.92mm H
Pre-order
32,000,000
Factory Lead Time:14 weeks
64,000+$0.0731
- +
Ext. Price(USD):$4,678.40
MOQ:64,000
Mult:8,000
SPQ:8,000
Power Connector, Crimp, Gold Plated, 24-28 AWG, Push-In
Pre-order
15,000,000
Factory Lead Time:15 weeks
30,000+$0.0731
- +
Ext. Price(USD):$2,193.00
MOQ:30,000
Mult:30,000
SPQ:15,000
Amphenol
ECAD Model:
Gold Plated
Available Stock
17,510
Estimated Ship Time:9-18 working days
250+$1.079
500+$1.079
1,000+$1.027
- +
Ext. Price(USD):$350.67
MOQ:325
Mult:25
SPQ:25
25 / PageGoto