Rectangular Connector Contacts

Results:

Rectangular connector contacts include separately ordered pins, sockets and crimp terminals for compatible connector housings. Begin with the manufacturer series and housing part number, then match the cavity, contact gender, wire range, termination, plating and application tooling. Similar appearance or wire size alone does not establish compatibility.

Lock the Housing Series Before Selecting a Contact

The housing determines which contact family and retention geometry can be used. Follow the approved compatibility path instead of selecting a terminal from its shape alone.

Manufacturer series → Housing part number → Cavity and contact size → Pin or socket → Approved contact

Use the housing datasheet or application specification to find the compatible contact part number. The same connector series may use different contacts for conductor size, insulation diameter, plating, sealing or production packaging. If the housing has not been selected, start with Rectangular Connector Housings.

Match Both Ends of the Contact

Each contact must fit the mating interface, lock into the correct housing cavity and accept the intended wire. Record all three interfaces before comparing stock or pricing.

Contact section What must match Fields to verify
Mating end The opposite conductive contact Pin, socket or non-gendered type; contact size and finish
Housing interface The cavity and retention system Series, cavity size, locking lance and insertion direction
Wire end The conductor and insulation AWG or cross-sectional area, conductor type and insulation diameter
Termination area The specified assembly process Crimp, solder, press-fit or other manufacturer-approved method

For a complete PCB header, wire housing and terminal combination, compare the available Wire to Board Connectors and verify every component against the same product series.

Choose the Contact Construction and Packaging

Contact form Selection focus
Stamped and formed Wire and insulation range, open-barrel geometry, reel format and specified crimp die
Machined or solid Contact size, conductor range, electrical load and dedicated tooling
Loose-piece packaging Prototype, service or manual assembly requirements
Reel or strip packaging Applicator compatibility, feed direction, carrier pitch and production quantity

Match the Wire, Finish and Electrical Load

  1. Confirm the complete conductor range in AWG or square millimetres.
  2. Check conductor stranding and the permitted insulation outside diameter.
  3. Compare contact material, tin or gold finish, and any specified plating thickness.
  4. Verify current rating under the stated wire, contact and temperature conditions.
  5. Check operating temperature, mating durability, vibration and environmental exposure.
Contact finish should be evaluated as part of the complete mating pair. Confirm that both sides use finishes approved by the connector manufacturer for the required environment and mating life.

Include Tooling in the Contact Selection

For crimp contacts, identify the manufacturer-specified hand tool or applicator, locator, die set, strip length and crimp-height requirements. Production inspection may also include conductor position, insulation support, bellmouth, pull force and contact deformation.

After termination, insert the contact in the specified direction until its retention feature locks into the housing. Use the approved extraction tool when removal is required. The guide to connector pins, crimping, soldering and IDC provides additional guidance on termination methods and crimp inspection.

Create a Contact Procurement Record

Record the housing series and part number, contact part number, pin or socket type, wire range, insulation diameter, termination, plating, packaging and required tooling. This provides a more reliable basis for replacement and production sourcing than appearance or wire size alone.

If the required interface or connector family has not yet been determined, return to the broader Rectangular Connectors range before selecting individual contacts.

Read More
Rectangular Connector ContactsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Amphenol
ECAD Model:
Amphenol Communications Solutions Gold Plated Crimp Terminal, Female, Minitek Series
In Stock240,185
2607+
100+$0.068
1,000+$0.0532
3,000+$0.0458
- +
Ext. Price(USD):$6.80
MOQ:100
Mult:10
SPQ:20,000
Amphenol
ECAD Model:
HC Terminal Contact, 20-22AWG
In Stock2,080
2430+
1+$0.2401
10+$0.1965
100+$0.1662
500+$0.1544
1,000+$0.1441
- +
Ext. Price(USD):$0.24
MOQ:1
Mult:1
SPQ:3,000
Crimp Terminal, 16-22 AWG
In Stock7,344
2639+
1+$0.1303
10+$0.0995
100+$0.0805
500+$0.0735
1,000+$0.0676
- +
Ext. Price(USD):$0.13
MOQ:1
Mult:1
SPQ:4,000
Amphenol
ECAD Model:
Amphenol Communications Solutions Gold Plated Crimp Terminal, Female, Minitek Series
In Stock120,302
2635+
1+$0.1373
10+$0.107
1,000+$0.0644
5,000+$0.0602
- +
Ext. Price(USD):$0.13
MOQ:1
Mult:1
SPQ:20,000
Crimp, 22-24 AWG
In Stock680
2614+
1+$0.4479
10+$0.3629
500+$0.2423
1,000+$0.2297
- +
Ext. Price(USD):$0.44
MOQ:1
Mult:1
SPQ:500
Crimp, 22-24 AWG
In Stock782
2614+
1+$1.0963
10+$0.9047
500+$0.5607
1,000+$0.541
- +
Ext. Price(USD):$1.09
MOQ:1
Mult:1
SPQ:1,000
AUTOMOTIVE CONTACT, SKT, CRIMP, 22-16AWG; Product Range:A Series; Contact Gender:Socket; Contact Termination Type:Crimp; Wire Size AWG Max:16AWG; Wire Size AWG Min:22AWG; Contact Material:Copper Alloy 44AM5252
Available Stock
9
Estimated Ship Time:6-12 working days
1+$24.0128
10+$23.584
250+$23.1552
500+$23.1552
- +
Ext. Price(USD):$24.01
MOQ:1
Mult:1
Amphenol
ECAD Model:
PCB Receptacle, Crimp, 760nm, Gold Plated, 22-26 AWG, Press-In
Available Stock
9,994
Estimated Ship Time:3-5 working days
18+
200+$0.1505
300+$0.1455
500+$0.1418
- +
Ext. Price(USD):$30.10
MOQ:200
Mult:1
SPQ:300
Crimp, Tin Plated, 800nm, 22 AWG
Available Stock
14,256
Estimated Ship Time:6-12 working days
100+$0.0713
1,000+$0.0638
10,000+$0.0627
20,000+$0.0627
- +
Ext. Price(USD):$28.52
MOQ:400
Mult:100
Standard Card Edge Connectors
Pre-order
720,000
Factory Lead Time:12 weeks
1,440+$11.5058
- +
Ext. Price(USD):$16,568.35
MOQ:1,440
Mult:360
SPQ:360
Crimp, 10-12 AWG
Available Stock
2,457
Estimated Ship Time:4-6 working days
1+$0.7803
200+$0.6491
- +
Ext. Price(USD):$0.78
MOQ:1
Mult:1
Amphenol
ECAD Model:
Connector Headers/Receptacles Crimp 760nm Gold 28-32 AWG Press-Fit 11.68mm L × 2.92mm H
Available Stock
80
Estimated Ship Time:4-6 working days
1+$0.2558
100+$0.2387
- +
Ext. Price(USD):$0.25
MOQ:1
Mult:1
SPQ:1
Power Connector, Crimp, Gold, 16-22 AWG, Push-In
Pre-order
12,000,000
Factory Lead Time:15 weeks
24,000+$0.0522
- +
Ext. Price(USD):$1,252.80
MOQ:24,000
Mult:24,000
SPQ:12,000
Amphenol
ECAD Model:
Circular Connector, Crimp, Silver, 10-12 AWG, Wire Mount
Available Stock
292
Estimated Ship Time:6-12 working days
10+$1.75
25+$1.68
500+$1.512
2,500+$1.512
- +
Ext. Price(USD):$24.50
MOQ:14
Mult:1
Crimp, 16-18 AWG
Available Stock
4,500
Estimated Ship Time:4-6 working days
1+$0.2905
50+$0.2481
- +
Ext. Price(USD):$0.29
MOQ:1
Mult:1
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles, Crimp, 1μm Gold Plated, 22-26 AWG, Press-Fit
Pre-order
100,000
Factory Lead Time:10-16 weeks
24+
10,000+$0.7469
20,000+$0.7274
- +
Ext. Price(USD):$7,469.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Crimp, 10-12 AWG
Available Stock
2,647
Estimated Ship Time:4-6 working days
1+$0.3487
300+$0.3004
- +
Ext. Price(USD):$0.34
MOQ:1
Mult:1
Power Connector, Crimp, Tin-Plated, 16-22 AWG, Push-In
Pre-order
12,000,000
Factory Lead Time:15 weeks
24,000+$0.0349
- +
Ext. Price(USD):$837.60
MOQ:24,000
Mult:24,000
SPQ:12,000
Terminal Crimp Gold Plated 16-20 AWG Push-In
Pre-order
6,000,000
Factory Lead Time:15 weeks
12,000+$0.0871
- +
Ext. Price(USD):$1,045.20
MOQ:12,000
Mult:12,000
SPQ:12,000
Amphenol
ECAD Model:
Available Stock
159
Estimated Ship Time:3-5 working days
1+$0.1928
500+$0.1446
4,000+$0.0965
- +
Ext. Price(USD):$0.19
MOQ:1
Mult:1
SPQ:4,000
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles Crimp, 760nm, Gold, 28-32 AWG, Press-In, 11.17mm(L) × 1.7mm(H)
Pre-order
100,000
Factory Lead Time:10-16 weeks
24+
10,000+$0.2123
20,000+$0.2067
- +
Ext. Price(USD):$2,123.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Amphenol
ECAD Model:
Crimp 1.02μm Gold 18-20AWG Press-In
Pre-order
10,000,000
Factory Lead Time:13 weeks
20,000+$0.4073
- +
Ext. Price(USD):$8,146.00
MOQ:20,000
Mult:10,000
SPQ:10,000
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles, Crimp, 1.02μm Gold, 18-20 AWG, Press-Fit
Pre-order
5,000,000
Factory Lead Time:12 weeks
10,000+$0.3342
- +
Ext. Price(USD):$3,342.00
MOQ:10,000
Mult:10,000
SPQ:10,000
MTK MICROSPACE TERM LM FEMALE CTW FS TIN 26 30
Pre-order
3,000,000
Factory Lead Time:20-24 weeks
10,000+$0.0621
30,000+$0.0573
- +
Ext. Price(USD):$621.00
MOQ:10,000
Mult:10,000
Amphenol
ECAD Model:
Crimp Terminal, 1.02μm Gold, Crimp
Pre-order
10,000,000
Factory Lead Time:10 weeks
20,000+$0.2194
- +
Ext. Price(USD):$4,388.00
MOQ:20,000
Mult:20,000
SPQ:20,000
25 / PageGoto