Rectangular Connector Contacts

Results:

Rectangular connector contacts include separately ordered pins, sockets and crimp terminals for compatible connector housings. Begin with the manufacturer series and housing part number, then match the cavity, contact gender, wire range, termination, plating and application tooling. Similar appearance or wire size alone does not establish compatibility.

Lock the Housing Series Before Selecting a Contact

The housing determines which contact family and retention geometry can be used. Follow the approved compatibility path instead of selecting a terminal from its shape alone.

Manufacturer series → Housing part number → Cavity and contact size → Pin or socket → Approved contact

Use the housing datasheet or application specification to find the compatible contact part number. The same connector series may use different contacts for conductor size, insulation diameter, plating, sealing or production packaging. If the housing has not been selected, start with Rectangular Connector Housings.

Match Both Ends of the Contact

Each contact must fit the mating interface, lock into the correct housing cavity and accept the intended wire. Record all three interfaces before comparing stock or pricing.

Contact section What must match Fields to verify
Mating end The opposite conductive contact Pin, socket or non-gendered type; contact size and finish
Housing interface The cavity and retention system Series, cavity size, locking lance and insertion direction
Wire end The conductor and insulation AWG or cross-sectional area, conductor type and insulation diameter
Termination area The specified assembly process Crimp, solder, press-fit or other manufacturer-approved method

For a complete PCB header, wire housing and terminal combination, compare the available Wire to Board Connectors and verify every component against the same product series.

Choose the Contact Construction and Packaging

Contact form Selection focus
Stamped and formed Wire and insulation range, open-barrel geometry, reel format and specified crimp die
Machined or solid Contact size, conductor range, electrical load and dedicated tooling
Loose-piece packaging Prototype, service or manual assembly requirements
Reel or strip packaging Applicator compatibility, feed direction, carrier pitch and production quantity

Match the Wire, Finish and Electrical Load

  1. Confirm the complete conductor range in AWG or square millimetres.
  2. Check conductor stranding and the permitted insulation outside diameter.
  3. Compare contact material, tin or gold finish, and any specified plating thickness.
  4. Verify current rating under the stated wire, contact and temperature conditions.
  5. Check operating temperature, mating durability, vibration and environmental exposure.
Contact finish should be evaluated as part of the complete mating pair. Confirm that both sides use finishes approved by the connector manufacturer for the required environment and mating life.

Include Tooling in the Contact Selection

For crimp contacts, identify the manufacturer-specified hand tool or applicator, locator, die set, strip length and crimp-height requirements. Production inspection may also include conductor position, insulation support, bellmouth, pull force and contact deformation.

After termination, insert the contact in the specified direction until its retention feature locks into the housing. Use the approved extraction tool when removal is required. The guide to connector pins, crimping, soldering and IDC provides additional guidance on termination methods and crimp inspection.

Create a Contact Procurement Record

Record the housing series and part number, contact part number, pin or socket type, wire range, insulation diameter, termination, plating, packaging and required tooling. This provides a more reliable basis for replacement and production sourcing than appearance or wire size alone.

If the required interface or connector family has not yet been determined, return to the broader Rectangular Connectors range before selecting individual contacts.

Read More
Rectangular Connector ContactsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Terminal, Crimp 380nm Gold 20-24 AWG
Available Stock
40,000
Estimated Ship Time:7-10 working days
24+
10,000+$0.0605
20,000+$0.0605
40,000+$0.0528
- +
Ext. Price(USD):$605.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Amphenol
ECAD Model:
PCB Receptacle, Crimp, 760nm, Gold Plated, 22-26 AWG, Press-In
Available Stock
98,811
Estimated Ship Time:6-13 working days
25+$0.3232
100+$0.2937
5,000+$0.2182
10,000+$0.2074
- +
Ext. Price(USD):$14.22
MOQ:44
Mult:1
SPQ:1
Tin-Plated
Available Stock
113,566
Estimated Ship Time:6-13 working days
250+$0.0196
1,000+$0.0184
2,500+$0.0165
10,000+$0.0151
- +
Ext. Price(USD):$14.01
MOQ:715
Mult:1
SPQ:1
Amphenol
ECAD Model:
FCI Crimp Receptacle Contact, Female Terminal
Available Stock
65
Estimated Ship Time:9-14 working days
25+$0.7132
50+$0.6791
1,000+$0.5496
3,000+$0.5086
- +
Ext. Price(USD):$26.38
MOQ:37
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles, Crimp, Gold, 22-26 AWG, Press-Fit
Available Stock
39,300
Estimated Ship Time:5-12 working days
2,500+$0.1046
5,000+$0.1026
100,000+$0.0961
150,000+$0.0959
- +
Ext. Price(USD):$261.50
MOQ:2,500
Mult:1
SPQ:10,000
Amphenol
ECAD Model:
Connector Headers/Receptacles Crimp 1.02μm Gold 28-32 AWG Press-Fit
Available Stock
18,970
Estimated Ship Time:9-14 working days
25+$0.6575
50+$0.6262
1,000+$0.5067
3,000+$0.4689
- +
Ext. Price(USD):$26.30
MOQ:40
Mult:1
SPQ:1
Circular Connector, Crimp, Silver Plated, 6-8 AWG, Wire Mount
Available Stock
42
Estimated Ship Time:9-14 working days
1+$13.5432
10+$11.5128
600+$8.6248
1,000+$8.3199
- +
Ext. Price(USD):$27.08
MOQ:2
Mult:1
SPQ:1
Ferrite Bead, Gold Plated, 760nm, 24 AWG, Crimp
Available Stock
98,063
Estimated Ship Time:6-13 working days
25+$0.1484
100+$0.1415
5,000+$0.1015
10,000+$0.0929
- +
Ext. Price(USD):$14.09
MOQ:95
Mult:1
SPQ:1
Marked, Crimp, 2.54μm Tin, 12 AWG, Push-In
Available Stock
9,000
Estimated Ship Time:7-9 working days
19+
926+$0.1188
4,200+$0.1133
8,400+$0.1089
- +
Ext. Price(USD):$110.00
MOQ:926
Mult:1
SPQ:1
Amphenol
ECAD Model:
Amphenol Communications Solutions Mini-PV Series Gold Plated Crimp Terminal Female Contact
Available Stock
29,131
Estimated Ship Time:7-10 working days
10+
397+$0.2772
30,000+$0.2772
- +
Ext. Price(USD):$110.04
MOQ:397
Mult:1
SPQ:1
Connector Power Crimp Gold 20-24 AWG Press-In
Available Stock
30,000
Estimated Ship Time:7-10 working days
24+
10,000+$0.0528
20,000+$0.0528
30,000+$0.0462
- +
Ext. Price(USD):$528.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles, Crimp, Gold, 22-26 AWG, Press-Fit
Available Stock
25,994
Estimated Ship Time:6-13 working days
25+$0.3738
100+$0.3399
5,000+$0.2549
10,000+$0.2506
- +
Ext. Price(USD):$14.20
MOQ:38
Mult:1
SPQ:1
Power Connector, Crimp, Gold Plated, 24-28 AWG, Push-In
Available Stock
11,100
Estimated Ship Time:6-13 working days
100+$0.1254
250+$0.1081
5,000+$0.0745
10,000+$0.0713
- +
Ext. Price(USD):$14.04
MOQ:112
Mult:1
SPQ:1
Amphenol Crimp Terminal, Female Contact, FLH Series
Available Stock
42,910
Estimated Ship Time:6-13 working days
100+$0.0702
250+$0.0633
5,000+$0.0486
10,000+$0.0464
- +
Ext. Price(USD):$14.04
MOQ:200
Mult:1
SPQ:1
Amphenol Communications Solutions Gold Plated Crimp Terminal, Female Contact, Minitek Series, Solder
Available Stock
4,200
Estimated Ship Time:5-10 working days
50+$0.0767
500+$0.0755
1,250+$0.0737
2,500+$0.0716
5,000+$0.0699
- +
Ext. Price(USD):$7.67
MOQ:100
Mult:50
Amphenol
ECAD Model:
Gold Plated
Available Stock
187
Estimated Ship Time:9-14 working days
10+$2.1103
25+$1.9781
1,000+$1.5246
2,500+$1.4292
- +
Ext. Price(USD):$27.43
MOQ:13
Mult:1
SPQ:1
Crimp, 2.03μm Tin Plated, 20-30 AWG
Available Stock
1,980
Estimated Ship Time:6-13 working days
250+$0.0506
1,000+$0.044
2,500+$0.0407
5,000+$0.0378
10,000+$0.0324
- +
Ext. Price(USD):$14.01
MOQ:277
Mult:1
SPQ:1
Available Stock
4,060
Estimated Ship Time:6-13 working days
25+$0.1656
100+$0.1576
5,000+$0.1102
10,000+$0.1048
- +
Ext. Price(USD):$14.07
MOQ:85
Mult:1
SPQ:1
Available Stock
20,500
Estimated Ship Time:6-13 working days
25+$0.2714
100+$0.2588
5,000+$0.1696
10,000+$0.162
- +
Ext. Price(USD):$14.11
MOQ:52
Mult:1
SPQ:1
Available Stock
8,330
Estimated Ship Time:6-13 working days
100+$0.138
250+$0.1177
5,000+$0.0983
10,000+$0.0929
- +
Ext. Price(USD):$14.07
MOQ:102
Mult:1
SPQ:1
Available Stock
29,509
Estimated Ship Time:6-13 working days
100+$0.1104
250+$0.0989
5,000+$0.0724
10,000+$0.0691
- +
Ext. Price(USD):$14.02
MOQ:127
Mult:1
SPQ:1
Available Stock
39,458
Estimated Ship Time:6-13 working days
250+$0.0368
1,000+$0.0319
2,500+$0.0297
5,000+$0.0281
10,000+$0.027
- +
Ext. Price(USD):$14.02
MOQ:381
Mult:1
SPQ:1
25 / PageGoto