Rectangular Connector Contacts

Results:

Rectangular connector contacts include separately ordered pins, sockets and crimp terminals for compatible connector housings. Begin with the manufacturer series and housing part number, then match the cavity, contact gender, wire range, termination, plating and application tooling. Similar appearance or wire size alone does not establish compatibility.

Lock the Housing Series Before Selecting a Contact

The housing determines which contact family and retention geometry can be used. Follow the approved compatibility path instead of selecting a terminal from its shape alone.

Manufacturer series → Housing part number → Cavity and contact size → Pin or socket → Approved contact

Use the housing datasheet or application specification to find the compatible contact part number. The same connector series may use different contacts for conductor size, insulation diameter, plating, sealing or production packaging. If the housing has not been selected, start with Rectangular Connector Housings.

Match Both Ends of the Contact

Each contact must fit the mating interface, lock into the correct housing cavity and accept the intended wire. Record all three interfaces before comparing stock or pricing.

Contact section What must match Fields to verify
Mating end The opposite conductive contact Pin, socket or non-gendered type; contact size and finish
Housing interface The cavity and retention system Series, cavity size, locking lance and insertion direction
Wire end The conductor and insulation AWG or cross-sectional area, conductor type and insulation diameter
Termination area The specified assembly process Crimp, solder, press-fit or other manufacturer-approved method

For a complete PCB header, wire housing and terminal combination, compare the available Wire to Board Connectors and verify every component against the same product series.

Choose the Contact Construction and Packaging

Contact form Selection focus
Stamped and formed Wire and insulation range, open-barrel geometry, reel format and specified crimp die
Machined or solid Contact size, conductor range, electrical load and dedicated tooling
Loose-piece packaging Prototype, service or manual assembly requirements
Reel or strip packaging Applicator compatibility, feed direction, carrier pitch and production quantity

Match the Wire, Finish and Electrical Load

  1. Confirm the complete conductor range in AWG or square millimetres.
  2. Check conductor stranding and the permitted insulation outside diameter.
  3. Compare contact material, tin or gold finish, and any specified plating thickness.
  4. Verify current rating under the stated wire, contact and temperature conditions.
  5. Check operating temperature, mating durability, vibration and environmental exposure.
Contact finish should be evaluated as part of the complete mating pair. Confirm that both sides use finishes approved by the connector manufacturer for the required environment and mating life.

Include Tooling in the Contact Selection

For crimp contacts, identify the manufacturer-specified hand tool or applicator, locator, die set, strip length and crimp-height requirements. Production inspection may also include conductor position, insulation support, bellmouth, pull force and contact deformation.

After termination, insert the contact in the specified direction until its retention feature locks into the housing. Use the approved extraction tool when removal is required. The guide to connector pins, crimping, soldering and IDC provides additional guidance on termination methods and crimp inspection.

Create a Contact Procurement Record

Record the housing series and part number, contact part number, pin or socket type, wire range, insulation diameter, termination, plating, packaging and required tooling. This provides a more reliable basis for replacement and production sourcing than appearance or wire size alone.

If the required interface or connector family has not yet been determined, return to the broader Rectangular Connectors range before selecting individual contacts.

Read More
Rectangular Connector ContactsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Amphenol
ECAD Model:
CONN SOCKET 8.0MM RADSOK ASSY
Available Stock
25
Estimated Ship Time:9-14 working days
1+$43.8264
10+$37.2503
100+$31.6669
250+$29.687
- +
Ext. Price(USD):$43.82
MOQ:1
Mult:1
SPQ:1
Lug Terminals, Crimp, 2μm Tin, 22-28 AWG, 14.54mm L × 2.9mm W
Available Stock
8,000
Estimated Ship Time:7-9 working days
21+
8,000+$0.0154
- +
Ext. Price(USD):$123.20
MOQ:8,000
Mult:8,000
SPQ:8,000
Minitek® 3.0 Connector System, Wire-to-Board Receptacle Crimp Terminal, Pre-Plated
Available Stock
15,197
Estimated Ship Time:6-13 working days
10+$0.9534
25+$0.8717
5,000+$0.499
10,000+$0.4255
- +
Ext. Price(USD):$14.30
MOQ:15
Mult:1
SPQ:1
Amphenol Communications Solutions Crimp Terminal, Female, ComboLock Series, SMD
Available Stock
180,000
Estimated Ship Time:7-9 working days
23+
60,000+$0.0286
- +
Ext. Price(USD):$1,716.00
MOQ:60,000
Mult:60,000
SPQ:60,000
Connector Headers PCB Receptacles Crimp 3μm Tin Plated 24 AWG Wire Mount 12.85mm L × 1.7mm H
Available Stock
74,980
Estimated Ship Time:6-13 working days
100+$0.1231
250+$0.1093
5,000+$0.0821
10,000+$0.0778
- +
Ext. Price(USD):$14.03
MOQ:114
Mult:1
SPQ:1
Connector Headers/PCB Receptacles, Crimp, 760nm, Gold, 26-28 AWG, Wire Mount, 12.85mm L × 1.6mm H
Available Stock
7,784
Estimated Ship Time:6-13 working days
100+$0.1265
250+$0.1104
5,000+$0.0842
10,000+$0.0756
- +
Ext. Price(USD):$14.04
MOQ:111
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers & PCB Receptacles, Crimp, Gold, 26-30 AWG, Press-Fit
Available Stock
60,000
Estimated Ship Time:5-12 working days
5,000+$0.0419
7,500+$0.0417
160,000+$0.0385
260,000+$0.0382
- +
Ext. Price(USD):$209.50
MOQ:5,000
Mult:1
SPQ:20,000
Marked, Crimp, Gold, 18-20 AWG, Press-Fit
Available Stock
5,558
Estimated Ship Time:9-14 working days
10+$2.2572
25+$2.1159
500+$1.7125
1,000+$1.6359
- +
Ext. Price(USD):$27.08
MOQ:12
Mult:1
SPQ:1
Crimp Terminal, 14-16 AWG
Available Stock
46,685
Estimated Ship Time:6-13 working days
25+$0.2438
100+$0.2312
5,000+$0.1598
12,000+$0.1555
- +
Ext. Price(USD):$14.14
MOQ:58
Mult:1
SPQ:1
Power Connector, Crimp, Tin-Plated, 24-28 AWG, Press-Fit, 14.5mm L × 3.2mm H
Available Stock
7,620
Estimated Ship Time:6-13 working days
250+$0.0506
1,000+$0.0462
2,500+$0.044
5,000+$0.0421
- +
Ext. Price(USD):$14.01
MOQ:277
Mult:1
SPQ:1
Power to the Board Crimp Terminal, Tin Plated, 24-28 AWG, Push-In
Available Stock
10,000
Estimated Ship Time:7-9 working days
21+
5,000+$0.0495
10,000+$0.0429
- +
Ext. Price(USD):$247.50
MOQ:5,000
Mult:5,000
SPQ:5,000
Amphenol
ECAD Model:
Connector Headers/PCB Receptacles, Crimp, 760nm, Gold Plated, 28-32 AWG, Press-Fit
Available Stock
10,000
Estimated Ship Time:7-9 working days
20+
10,000+$0.1463
- +
Ext. Price(USD):$1,463.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Lug Terminals Crimp 2μm Tin 16 AWG 14.54mm L × 2.9mm W
Available Stock
8,149
Estimated Ship Time:6-13 working days
250+$0.0495
1,000+$0.0429
2,500+$0.0407
5,000+$0.0378
10,000+$0.0335
- +
Ext. Price(USD):$14.00
MOQ:283
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers/Receptacles, Crimp, Tin-Plated, 22-26 AWG, Press-Fit
Available Stock
15,225
Estimated Ship Time:6-13 working days
25+$0.4278
100+$0.3905
3,000+$0.3002
10,000+$0.2927
- +
Ext. Price(USD):$14.11
MOQ:33
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers & PCB Receptacles, Crimp, 5μm Tin Plated, 28-32 AWG, Press-Fit
Available Stock
15,000
Estimated Ship Time:7-9 working days
22+
15,000+$0.0913
90,000+$0.0913
- +
Ext. Price(USD):$1,369.50
MOQ:15,000
Mult:15,000
SPQ:15,000
Lug Terminal, Gold Plated, 24 AWG, 14.54mm L × 2.9mm W
Available Stock
14,442
Estimated Ship Time:6-13 working days
25+$0.3186
100+$0.276
5,000+$0.1706
10,000+$0.1652
- +
Ext. Price(USD):$14.01
MOQ:44
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers/PCB Receptacles, Crimp, 760nm, Gold Plated, 28-32 AWG, Press-Fit
Available Stock
20,425
Estimated Ship Time:6-13 working days
25+$0.4002
100+$0.3696
5,000+$0.2678
10,000+$0.2614
- +
Ext. Price(USD):$14.00
MOQ:35
Mult:1
SPQ:1
Available Stock
78,550
Estimated Ship Time:6-13 working days
250+$0.038
1,000+$0.0341
2,500+$0.0319
10,000+$0.027
- +
Ext. Price(USD):$14.02
MOQ:369
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers/PCB Receptacles Crimp 1.02μm Gold 22-26 AWG Press-Fit
Available Stock
24,011
Estimated Ship Time:6-13 working days
10+$0.6659
1,000+$0.5951
2,000+$0.5497
- +
Ext. Price(USD):$14.64
MOQ:22
Mult:1
SPQ:1
PCB Connector Accessory Crimp 22 AWG
Available Stock
9,850
Estimated Ship Time:5-10 working days
50+$0.1445
500+$0.1303
1,250+$0.1183
2,500+$0.1086
5,000+$0.1002
- +
Ext. Price(USD):$7.22
MOQ:50
Mult:50
Amphenol Communications Solutions Crimp Terminal, Male Contact, Minitek 1.80 Series
Available Stock
255,040
Estimated Ship Time:5-12 working days
10,000+$0.0508
30,000+$0.0487
360,000+$0.0458
480,000+$0.0452
- +
Ext. Price(USD):$508.00
MOQ:10,000
Mult:10,000
SPQ:1
Amphenol
ECAD Model:
Amphenol Communications Solutions Mini-PV Series Gold Plated Crimp Terminal Female Contact
Available Stock
19,550
Estimated Ship Time:7-10 working days
24+
200+$0.297
1,000+$0.2618
2,000+$0.2552
3,900+$0.2497
- +
Ext. Price(USD):$59.40
MOQ:200
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles, Crimp, 760nm, Gold, 22-26 AWG, Press-Fit, 11.68mm L × 3.53mm H
Available Stock
38,800
Estimated Ship Time:7-9 working days
26+
10,000+$0.1694
- +
Ext. Price(USD):$1,694.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Amphenol
ECAD Model:
Connector Headers/PCB Receptacles Crimp 1.02μm Gold 22-26 AWG Press-Fit
Available Stock
2,000
Estimated Ship Time:7-9 working days
24+
385+$0.286
25,000+$0.286
- +
Ext. Price(USD):$110.11
MOQ:385
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles, Crimp, 760nm, Gold, 22-26 AWG, Press-Fit, 11.68mm L × 3.53mm H
Available Stock
10,048
Estimated Ship Time:9-14 working days
50+$0.3359
100+$0.3199
1,000+$0.2718
2,500+$0.2548
- +
Ext. Price(USD):$26.20
MOQ:78
Mult:1
SPQ:1
25 / PageGoto