Rectangular Connector Contacts

Results:

Rectangular connector contacts include separately ordered pins, sockets and crimp terminals for compatible connector housings. Begin with the manufacturer series and housing part number, then match the cavity, contact gender, wire range, termination, plating and application tooling. Similar appearance or wire size alone does not establish compatibility.

Lock the Housing Series Before Selecting a Contact

The housing determines which contact family and retention geometry can be used. Follow the approved compatibility path instead of selecting a terminal from its shape alone.

Manufacturer series → Housing part number → Cavity and contact size → Pin or socket → Approved contact

Use the housing datasheet or application specification to find the compatible contact part number. The same connector series may use different contacts for conductor size, insulation diameter, plating, sealing or production packaging. If the housing has not been selected, start with Rectangular Connector Housings.

Match Both Ends of the Contact

Each contact must fit the mating interface, lock into the correct housing cavity and accept the intended wire. Record all three interfaces before comparing stock or pricing.

Contact section What must match Fields to verify
Mating end The opposite conductive contact Pin, socket or non-gendered type; contact size and finish
Housing interface The cavity and retention system Series, cavity size, locking lance and insertion direction
Wire end The conductor and insulation AWG or cross-sectional area, conductor type and insulation diameter
Termination area The specified assembly process Crimp, solder, press-fit or other manufacturer-approved method

For a complete PCB header, wire housing and terminal combination, compare the available Wire to Board Connectors and verify every component against the same product series.

Choose the Contact Construction and Packaging

Contact form Selection focus
Stamped and formed Wire and insulation range, open-barrel geometry, reel format and specified crimp die
Machined or solid Contact size, conductor range, electrical load and dedicated tooling
Loose-piece packaging Prototype, service or manual assembly requirements
Reel or strip packaging Applicator compatibility, feed direction, carrier pitch and production quantity

Match the Wire, Finish and Electrical Load

  1. Confirm the complete conductor range in AWG or square millimetres.
  2. Check conductor stranding and the permitted insulation outside diameter.
  3. Compare contact material, tin or gold finish, and any specified plating thickness.
  4. Verify current rating under the stated wire, contact and temperature conditions.
  5. Check operating temperature, mating durability, vibration and environmental exposure.
Contact finish should be evaluated as part of the complete mating pair. Confirm that both sides use finishes approved by the connector manufacturer for the required environment and mating life.

Include Tooling in the Contact Selection

For crimp contacts, identify the manufacturer-specified hand tool or applicator, locator, die set, strip length and crimp-height requirements. Production inspection may also include conductor position, insulation support, bellmouth, pull force and contact deformation.

After termination, insert the contact in the specified direction until its retention feature locks into the housing. Use the approved extraction tool when removal is required. The guide to connector pins, crimping, soldering and IDC provides additional guidance on termination methods and crimp inspection.

Create a Contact Procurement Record

Record the housing series and part number, contact part number, pin or socket type, wire range, insulation diameter, termination, plating, packaging and required tooling. This provides a more reliable basis for replacement and production sourcing than appearance or wire size alone.

If the required interface or connector family has not yet been determined, return to the broader Rectangular Connectors range before selecting individual contacts.

Read More
Rectangular Connector ContactsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Power Connector Crimp Tin 24-28 AWG Press-In
Available Stock
14,340
Estimated Ship Time:6-13 working days
25+$0.0552
- +
Ext. Price(USD):$14.02
MOQ:254
Mult:1
SPQ:1
Connector Headers and PCB Receptacles Crimp Tin-Plated 24-26 AWG Wire Mount
Available Stock
18,418
Estimated Ship Time:6-13 working days
250+$0.0276
1,000+$0.0253
2,500+$0.0231
10,000+$0.0194
- +
Ext. Price(USD):$14.02
MOQ:508
Mult:1
SPQ:1
Amphenol Communications Solutions Crimp Terminal, Female Contact, Minitek Series
Available Stock
35,240
Estimated Ship Time:6-13 working days
250+$0.0299
1,000+$0.0275
2,500+$0.0231
5,000+$0.022
- +
Ext. Price(USD):$14.02
MOQ:469
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers/Receptacles Crimp 760nm Gold 28-32 AWG Press-Fit 11.68mm L × 2.92mm H
Available Stock
1,967
Estimated Ship Time:7-9 working days
23+
250+$0.2409
1,200+$0.2376
- +
Ext. Price(USD):$60.22
MOQ:250
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles, Crimp, Gold, 18-20 AWG, Press-In, 11.68mm L × 3.53mm H
Available Stock
3,623
Estimated Ship Time:6-13 working days
25+$0.3404
100+$0.2882
5,000+$0.1901
10,000+$0.175
- +
Ext. Price(USD):$14.29
MOQ:42
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles, Crimp, Gold, 18-20 AWG, Press-In, 11.68mm L × 3.53mm H
Available Stock
3,860
Estimated Ship Time:6-13 working days
25+$0.3002
100+$0.2864
2,500+$0.2128
10,000+$0.2117
- +
Ext. Price(USD):$14.10
MOQ:47
Mult:1
SPQ:1
Connector Headers and PCB Receptacles, Copper/Tin Wire Mount 16.8mm L × 2.9mm H
Available Stock
16,000
Estimated Ship Time:7-9 working days
23+
4,000+$0.0189
16,000+$0.0154
- +
Ext. Price(USD):$75.60
MOQ:4,000
Mult:4,000
SPQ:4,000
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles Crimp 1.27μm Gold 22-26 AWG Press-Fit 3.53mm H
Available Stock
9,288
Estimated Ship Time:6-13 working days
10+$0.9706
25+$0.8878
5,000+$0.5087
8,000+$0.4428
- +
Ext. Price(USD):$14.55
MOQ:15
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles Crimp 1.02μm Gold 28-32 AWG Press-In 11.68mm L × 2.92mm H
Available Stock
7,430
Estimated Ship Time:6-13 working days
25+$0.4163
100+$0.352
5,000+$0.2311
10,000+$0.2138
- +
Ext. Price(USD):$14.15
MOQ:34
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles Crimp 1.02μm Gold 22-26 AWG Press-In 11.68mm L × 3.53mm H
Available Stock
1,806
Estimated Ship Time:7-9 working days
24+
445+$0.2475
30,000+$0.2475
- +
Ext. Price(USD):$110.13
MOQ:445
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers/PCB Receptacles, Crimp, 760nm, Gold Plated, 28-32 AWG, Press-Fit
Available Stock
18,336
Estimated Ship Time:6-13 working days
25+$0.2289
100+$0.2185
3,000+$0.1609
10,000+$0.1598
- +
Ext. Price(USD):$14.19
MOQ:62
Mult:1
SPQ:1
Amphenol
ECAD Model:
Circular Connector Crimp Silver 8-10 AWG Wire Mount
Available Stock
6
Estimated Ship Time:9-17 working days
1+$5.5985
10+$4.8508
500+$3.6743
1,000+$3.6538
- +
Ext. Price(USD):$33.59
MOQ:6
Mult:1
Crimp, Gold Plated, 16-22 AWG
Available Stock
15,494
Estimated Ship Time:6-13 working days
10+$0.6279
25+$0.5612
2,500+$0.3866
5,000+$0.3683
- +
Ext. Price(USD):$14.44
MOQ:23
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers/Receptacles Crimp 760nm Gold 28-32 AWG Press-Fit 11.68mm L × 2.92mm H
Available Stock
37,930
Estimated Ship Time:9-14 working days
50+$0.3797
100+$0.3615
1,000+$0.3072
2,500+$0.288
- +
Ext. Price(USD):$26.19
MOQ:69
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers and PCB Receptacles Crimp 760nm Gold 28-32 AWG Press-In 18.2mm L × 2.92mm H
Available Stock
71,464
Estimated Ship Time:6-13 working days
10+$0.9488
25+$0.8464
2,500+$0.5854
5,000+$0.5562
- +
Ext. Price(USD):$14.23
MOQ:15
Mult:1
SPQ:1
Power Connector, Crimp, Tin-Plated, 24-28 AWG, Press-Fit, 14.5mm L × 3.2mm H
Available Stock
25,148
Estimated Ship Time:7-9 working days
18+
2,565+$0.0429
11,738+$0.0407
23,475+$0.0396
- +
Ext. Price(USD):$110.03
MOQ:2,565
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers/PCB Receptacles Crimp 1.02μm Gold 22-26 AWG Press-Fit
Available Stock
25,707
Estimated Ship Time:6-13 working days
25+$0.4566
100+$0.4158
5,000+$0.3208
10,000+$0.2948
- +
Ext. Price(USD):$14.15
MOQ:31
Mult:1
SPQ:1
Power Connector Crimp, Gold, 12 AWG, Wire Mount
Available Stock
3,000
Estimated Ship Time:7-9 working days
20+
176+$0.627
790+$0.605
1,579+$0.583
- +
Ext. Price(USD):$110.35
MOQ:176
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers & PCB Receptacles, Crimp, Gold Plated, 22-26 AWG, Press-In, 11.68mm L × 3.53mm H
Available Stock
31,167
Estimated Ship Time:9-14 working days
50+$0.2995
100+$0.2371
1,000+$0.2014
2,500+$0.1888
- +
Ext. Price(USD):$26.08
MOQ:110
Mult:1
SPQ:1
Connectors Headers & Wire Housings
Available Stock
5,550
Estimated Ship Time:7-9 working days
10+
2,000+$0.055
- +
Ext. Price(USD):$110.00
MOQ:2,000
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector Headers/Receptacles, Crimp, Tin-Plated, 22-26 AWG, Press-Fit
Available Stock
15,945
Estimated Ship Time:6-13 working days
25+$0.1898
100+$0.1806
5,000+$0.1285
8,000+$0.1177
- +
Ext. Price(USD):$14.04
MOQ:74
Mult:1
SPQ:1
Amphenol
ECAD Model:
8.0MM PIN CONTACT ASM 25MM2
Available Stock
4
Estimated Ship Time:9-14 working days
1+$24.7428
10+$21.0287
250+$16.7572
500+$15.9586
- +
Ext. Price(USD):$49.48
MOQ:2
Mult:1
SPQ:1
Power Connector, Crimp, Gold Plated, 24-28 AWG, Push-In
Available Stock
30,000
Estimated Ship Time:7-10 working days
24+
5,000+$0.055
15,000+$0.055
30,000+$0.0495
- +
Ext. Price(USD):$275.00
MOQ:5,000
Mult:5,000
SPQ:5,000
Amphenol
ECAD Model:
Circular Connector, Crimp, Gold Plated, 10-12 AWG, Wire Mount
Available Stock
687
Estimated Ship Time:6-13 working days
1+$3.611
10+$3.124
1,000+$2.2032
2,600+$2.0628
- +
Ext. Price(USD):$14.44
MOQ:4
Mult:1
SPQ:1
Amphenol
ECAD Model:
PCB Receptacle, Crimp, 760nm, Gold Plated, 22-26 AWG, Press-In
Available Stock
14,365
Estimated Ship Time:6-13 working days
10+$0.8855
25+$0.7912
2,000+$0.5476
5,000+$0.5195
- +
Ext. Price(USD):$14.16
MOQ:16
Mult:1
SPQ:1
25 / PageGoto