Rectangular Connector Contacts

Results:

Rectangular connector contacts include separately ordered pins, sockets and crimp terminals for compatible connector housings. Begin with the manufacturer series and housing part number, then match the cavity, contact gender, wire range, termination, plating and application tooling. Similar appearance or wire size alone does not establish compatibility.

Lock the Housing Series Before Selecting a Contact

The housing determines which contact family and retention geometry can be used. Follow the approved compatibility path instead of selecting a terminal from its shape alone.

Manufacturer series → Housing part number → Cavity and contact size → Pin or socket → Approved contact

Use the housing datasheet or application specification to find the compatible contact part number. The same connector series may use different contacts for conductor size, insulation diameter, plating, sealing or production packaging. If the housing has not been selected, start with Rectangular Connector Housings.

Match Both Ends of the Contact

Each contact must fit the mating interface, lock into the correct housing cavity and accept the intended wire. Record all three interfaces before comparing stock or pricing.

Contact section What must match Fields to verify
Mating end The opposite conductive contact Pin, socket or non-gendered type; contact size and finish
Housing interface The cavity and retention system Series, cavity size, locking lance and insertion direction
Wire end The conductor and insulation AWG or cross-sectional area, conductor type and insulation diameter
Termination area The specified assembly process Crimp, solder, press-fit or other manufacturer-approved method

For a complete PCB header, wire housing and terminal combination, compare the available Wire to Board Connectors and verify every component against the same product series.

Choose the Contact Construction and Packaging

Contact form Selection focus
Stamped and formed Wire and insulation range, open-barrel geometry, reel format and specified crimp die
Machined or solid Contact size, conductor range, electrical load and dedicated tooling
Loose-piece packaging Prototype, service or manual assembly requirements
Reel or strip packaging Applicator compatibility, feed direction, carrier pitch and production quantity

Match the Wire, Finish and Electrical Load

  1. Confirm the complete conductor range in AWG or square millimetres.
  2. Check conductor stranding and the permitted insulation outside diameter.
  3. Compare contact material, tin or gold finish, and any specified plating thickness.
  4. Verify current rating under the stated wire, contact and temperature conditions.
  5. Check operating temperature, mating durability, vibration and environmental exposure.
Contact finish should be evaluated as part of the complete mating pair. Confirm that both sides use finishes approved by the connector manufacturer for the required environment and mating life.

Include Tooling in the Contact Selection

For crimp contacts, identify the manufacturer-specified hand tool or applicator, locator, die set, strip length and crimp-height requirements. Production inspection may also include conductor position, insulation support, bellmouth, pull force and contact deformation.

After termination, insert the contact in the specified direction until its retention feature locks into the housing. Use the approved extraction tool when removal is required. The guide to connector pins, crimping, soldering and IDC provides additional guidance on termination methods and crimp inspection.

Create a Contact Procurement Record

Record the housing series and part number, contact part number, pin or socket type, wire range, insulation diameter, termination, plating, packaging and required tooling. This provides a more reliable basis for replacement and production sourcing than appearance or wire size alone.

If the required interface or connector family has not yet been determined, return to the broader Rectangular Connectors range before selecting individual contacts.

Read More
Rectangular Connector ContactsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
CONTACT, 10 TO 12 AWG
Available Stock
483
Estimated Ship Time:9-14 working days
1+$4.1688
10+$3.5413
100+$3.0096
250+$2.8211
- +
Ext. Price(USD):$29.18
MOQ:7
Mult:1
SPQ:1
Available Stock
15,007
Estimated Ship Time:6-13 working days
100+$0.1093
250+$0.0978
1,000+$0.0891
2,500+$0.0821
7,000+$0.0756
- +
Ext. Price(USD):$14.09
MOQ:129
Mult:1
SPQ:1
Crimp Terminal 203nm Gold Plated 14-16 AWG
Available Stock
8,795
Estimated Ship Time:6-13 working days
10+$1.05
25+$0.9373
2,500+$0.6815
5,000+$0.6415
- +
Ext. Price(USD):$14.70
MOQ:14
Mult:1
SPQ:1
Available Stock
31,098
Estimated Ship Time:6-13 working days
100+$0.1093
250+$0.0978
5,000+$0.0832
10,000+$0.0767
- +
Ext. Price(USD):$14.09
MOQ:129
Mult:1
SPQ:1
Connector Headers and PCB Receptacles, Crimp, Tin, 18-22 AWG, Press-Fit
Available Stock
2,053
Estimated Ship Time:6-13 working days
25+$0.1656
100+$0.1645
5,000+$0.1112
10,000+$0.1037
- +
Ext. Price(USD):$14.07
MOQ:85
Mult:1
SPQ:1
Automotive Connectors, Housings
Available Stock
1,641
Estimated Ship Time:9-14 working days
100+$0.1923
250+$0.1803
500+$0.1717
1,000+$0.1635
2,500+$0.1532
- +
Ext. Price(USD):$26.15
MOQ:136
Mult:1
SPQ:1
Connector Headers and PCB Receptacles, Crimp, Gold, 22-26 AWG, Push-In
Available Stock
490
Estimated Ship Time:6-13 working days
10+$0.9775
25+$0.8729
2,500+$0.6199
5,000+$0.6059
- +
Ext. Price(USD):$14.66
MOQ:15
Mult:1
SPQ:1
Connector Headers and PCB Receptacles, Crimp, Tin, 26-30 AWG, Press-Fit
Available Stock
8,929
Estimated Ship Time:9-14 working days
100+$0.2574
250+$0.2413
500+$0.2297
1,000+$0.2187
2,500+$0.205
- +
Ext. Price(USD):$26.25
MOQ:102
Mult:1
SPQ:1
Automotive Connectors
Available Stock
6,476
Estimated Ship Time:6-13 working days
25+$0.3542
100+$0.3003
5,000+$0.1804
10,000+$0.1782
- +
Ext. Price(USD):$14.16
MOQ:40
Mult:1
SPQ:1
Hirose Gold Plated Crimp Terminal Female Contact, DF11 Series, Max 0.05mm²
Available Stock
300
Estimated Ship Time:5-10 working days
100+$0.2014
500+$0.1963
1,000+$0.1932
- +
Ext. Price(USD):$20.14
MOQ:100
Mult:100
Connector Headers and PCB Receptacles Crimp Gold Plated 26-30 AWG Press-In
Available Stock
1,058
Estimated Ship Time:6-13 working days
10+$0.9775
25+$0.8729
2,500+$0.6199
5,000+$0.6059
- +
Ext. Price(USD):$14.66
MOQ:15
Mult:1
SPQ:1
Marked Rectangular Connector Terminal Crimp 1μm Tin 30 AWG Press-Fit
Available Stock
5,298
Estimated Ship Time:6-13 working days
100+$0.084
250+$0.0748
5,000+$0.0605
10,000+$0.0572
- +
Ext. Price(USD):$14.02
MOQ:167
Mult:1
SPQ:1
Hirose Tin-Plated Crimp Terminal, Male Contact, DF62W Series, Max 0.3mm²
Available Stock
20,798
Estimated Ship Time:6-13 working days
25+$0.1909
100+$0.1461
5,000+$0.1026
10,000+$0.0972
- +
Ext. Price(USD):$14.12
MOQ:74
Mult:1
SPQ:1
Hirose Tin-Plated Crimp Terminal, Female Contact, DF11 Series, Max 0.2mm²
Available Stock
300
Estimated Ship Time:5-10 working days
100+$0.1773
500+$0.1728
1,000+$0.1703
- +
Ext. Price(USD):$17.73
MOQ:100
Mult:100
Automotive Connectors, Crimp, Tin, Press-In
Available Stock
900
Estimated Ship Time:9-14 working days
25+$0.7322
50+$0.697
100+$0.6637
250+$0.6221
500+$0.5923
- +
Ext. Price(USD):$26.35
MOQ:36
Mult:1
SPQ:1
Crimp, 203nm, Gold Plated, 24-28 AWG
Available Stock
13,175
Estimated Ship Time:6-13 working days
25+$0.383
100+$0.3487
5,000+$0.2473
10,000+$0.2214
- +
Ext. Price(USD):$14.17
MOQ:37
Mult:1
SPQ:1
Power to the Board Crimp Terminal, 203nm, Gold, 10-12 AWG
Available Stock
1,887
Estimated Ship Time:6-13 working days
1+$2.622
10+$2.231
2,500+$1.4148
5,000+$1.404
- +
Ext. Price(USD):$15.73
MOQ:6
Mult:1
SPQ:1
Header, SMD
Available Stock
487
Estimated Ship Time:6-13 working days
1+$2.1965
10+$1.8745
900+$1.1988
2,400+$1.1664
- +
Ext. Price(USD):$15.37
MOQ:7
Mult:1
SPQ:1
Connector Headers and PCB Receptacles, Crimp, Tin-Plated, 22-26 AWG, Push-In
Available Stock
100
Estimated Ship Time:5-10 working days
100+$0.1563
500+$0.1407
- +
Ext. Price(USD):$15.63
MOQ:100
Mult:100
Rectangular Connector Contact, Crimp, 200nm Gold Plated, 30 AWG, Push-In
Available Stock
300
Estimated Ship Time:9-14 working days
100+$0.1703
300+$0.1576
500+$0.152
1,000+$0.1447
2,500+$0.1356
- +
Ext. Price(USD):$26.05
MOQ:153
Mult:1
SPQ:1
Hirose Heavy Duty Power Connector Contact, PQ50 Series, Crimp Terminal, Receptacle, 18.9mm × 3mm × 4.55mm
Available Stock
220
Estimated Ship Time:6-13 working days
1+$2.2195
10+$1.8975
2,500+$1.188
5,000+$1.1772
- +
Ext. Price(USD):$15.53
MOQ:7
Mult:1
SPQ:1
Connector Headers and PCB Receptacles, Crimp, Tin, 30 AWG, Press-Fit
Available Stock
9,400
Estimated Ship Time:6-13 working days
25+$0.1748
100+$0.1518
5,000+$0.095
10,000+$0.0875
- +
Ext. Price(USD):$14.15
MOQ:81
Mult:1
SPQ:1
Hirose Tin-Plated Crimp Terminal, Female Contact, DF62 Series, Max 0.3mm²
Available Stock
8,319
Estimated Ship Time:6-13 working days
25+$0.2438
100+$0.1622
300+$0.1419
1,000+$0.1253
- +
Ext. Price(USD):$14.14
MOQ:58
Mult:1
SPQ:1
Crimp, Gold, 16-18 AWG
Available Stock
14,729
Estimated Ship Time:6-13 working days
10+$0.7774
25+$0.7107
1,000+$0.4558
2,500+$0.4277
- +
Ext. Price(USD):$14.77
MOQ:19
Mult:1
SPQ:1
Crimp, Gold, 14-16 AWG
Available Stock
771
Estimated Ship Time:6-13 working days
10+$1.311
25+$1.122
2,500+$0.8327
5,000+$0.8132
- +
Ext. Price(USD):$14.42
MOQ:11
Mult:1
SPQ:1
25 / PageGoto