Rectangular Connector Contacts

Results:

Rectangular connector contacts include separately ordered pins, sockets and crimp terminals for compatible connector housings. Begin with the manufacturer series and housing part number, then match the cavity, contact gender, wire range, termination, plating and application tooling. Similar appearance or wire size alone does not establish compatibility.

Lock the Housing Series Before Selecting a Contact

The housing determines which contact family and retention geometry can be used. Follow the approved compatibility path instead of selecting a terminal from its shape alone.

Manufacturer series → Housing part number → Cavity and contact size → Pin or socket → Approved contact

Use the housing datasheet or application specification to find the compatible contact part number. The same connector series may use different contacts for conductor size, insulation diameter, plating, sealing or production packaging. If the housing has not been selected, start with Rectangular Connector Housings.

Match Both Ends of the Contact

Each contact must fit the mating interface, lock into the correct housing cavity and accept the intended wire. Record all three interfaces before comparing stock or pricing.

Contact section What must match Fields to verify
Mating end The opposite conductive contact Pin, socket or non-gendered type; contact size and finish
Housing interface The cavity and retention system Series, cavity size, locking lance and insertion direction
Wire end The conductor and insulation AWG or cross-sectional area, conductor type and insulation diameter
Termination area The specified assembly process Crimp, solder, press-fit or other manufacturer-approved method

For a complete PCB header, wire housing and terminal combination, compare the available Wire to Board Connectors and verify every component against the same product series.

Choose the Contact Construction and Packaging

Contact form Selection focus
Stamped and formed Wire and insulation range, open-barrel geometry, reel format and specified crimp die
Machined or solid Contact size, conductor range, electrical load and dedicated tooling
Loose-piece packaging Prototype, service or manual assembly requirements
Reel or strip packaging Applicator compatibility, feed direction, carrier pitch and production quantity

Match the Wire, Finish and Electrical Load

  1. Confirm the complete conductor range in AWG or square millimetres.
  2. Check conductor stranding and the permitted insulation outside diameter.
  3. Compare contact material, tin or gold finish, and any specified plating thickness.
  4. Verify current rating under the stated wire, contact and temperature conditions.
  5. Check operating temperature, mating durability, vibration and environmental exposure.
Contact finish should be evaluated as part of the complete mating pair. Confirm that both sides use finishes approved by the connector manufacturer for the required environment and mating life.

Include Tooling in the Contact Selection

For crimp contacts, identify the manufacturer-specified hand tool or applicator, locator, die set, strip length and crimp-height requirements. Production inspection may also include conductor position, insulation support, bellmouth, pull force and contact deformation.

After termination, insert the contact in the specified direction until its retention feature locks into the housing. Use the approved extraction tool when removal is required. The guide to connector pins, crimping, soldering and IDC provides additional guidance on termination methods and crimp inspection.

Create a Contact Procurement Record

Record the housing series and part number, contact part number, pin or socket type, wire range, insulation diameter, termination, plating, packaging and required tooling. This provides a more reliable basis for replacement and production sourcing than appearance or wire size alone.

If the required interface or connector family has not yet been determined, return to the broader Rectangular Connectors range before selecting individual contacts.

Read More
Rectangular Connector ContactsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Hirose Tin-Plated Crimp Terminal, Female Contact, DF33 Series, Max 0.5mm²
Available Stock
218
Estimated Ship Time:4-6 working days
1+$0.0733
- +
Ext. Price(USD):$0.07
MOQ:1
Mult:1
SPQ:1
Connector Headers and PCB Receptacles, Crimp, Gold Plated, 20-22 AWG, Press-Fit
Available Stock
300
Estimated Ship Time:6-7 working days
19+
100+$0.1295
- +
Ext. Price(USD):$12.95
MOQ:100
Mult:100
Connector Headers and PCB Receptacles, Crimp, 203nm Gold, 26-30 AWG, Press-Fit
Available Stock
1,378
Estimated Ship Time:14-17 working days
300+$0.1315
500+$0.1151
10,000+$0.0746
30,000+$0.0746
- +
Ext. Price(USD):$50.10
MOQ:381
Mult:1
SPQ:1
Automotive Connectors Terminals 22 AWG to 20 AWG
Available Stock
2,389
Estimated Ship Time:6-7 working days
20+$0.1144
- +
Ext. Price(USD):$2.28
MOQ:20
Mult:20
Connector Headers and PCB Receptacles IDC Gold Plated 24 AWG Wire Mount
Available Stock
16
Estimated Ship Time:4-6 working days
1+$0.203
- +
Ext. Price(USD):$0.20
MOQ:1
Mult:1
SPQ:1
Connector Headers and PCB Receptacles, Crimp, Gold, 30 AWG, Press-Fit
Pre-order
10,000
Factory Lead Time:14-26 weeks
10,000+$0.0869
- +
Ext. Price(USD):$869.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Connector Headers and PCB Receptacles Crimp Gold 28-30 AWG Press-Fit
Available Stock
60,000
Estimated Ship Time:3-5 working days
25+
20,000+$0.021
40,000+$0.0205
60,000+$0.0198
- +
Ext. Price(USD):$420.00
MOQ:20,000
Mult:20,000
SPQ:20,000
Automotive Connectors Female Terminals Crimp Tin 20-24 AWG Press-In
Available Stock
50
Estimated Ship Time:4-6 working days
1+$0.205
- +
Ext. Price(USD):$0.20
MOQ:1
Mult:1
SPQ:1
Connector Headers and PCB Receptacles Crimp Gold Plated 26-30 AWG Press-In
Available Stock
6,210
Estimated Ship Time:3-5 working days
25+
2,000+$0.022
4,000+$0.0212
8,000+$0.0207
- +
Ext. Price(USD):$44.00
MOQ:2,000
Mult:1
SPQ:4,000
Rectangular Connector, Crimp, Gold Plated, 24-28 AWG, Press-Fit
Available Stock
20
Estimated Ship Time:4-6 working days
1+$0.313
- +
Ext. Price(USD):$0.31
MOQ:1
Mult:1
SPQ:1
Connector Headers & PCB Receptacles, Crimp, 203nm Gold, 24-28 AWG, Press-Fit, 8.15mm L
Available Stock
350
Estimated Ship Time:5-7 working days
25+
1+$0.0712
100+$0.0596
1,000+$0.0522
- +
Ext. Price(USD):$0.07
MOQ:1
Mult:1
SPQ:15,000
Rectangular Connector, Crimp, Silver Plated, 24-28 AWG, Push-In
Available Stock
50
Estimated Ship Time:4-6 working days
1+$0.1126
- +
Ext. Price(USD):$0.11
MOQ:1
Mult:1
SPQ:1
Crimp Terminal, Gold, 22-26 AWG, Press-Fit
Pre-order
10,000
Factory Lead Time:14-26 weeks
10,000+$0.0909
- +
Ext. Price(USD):$909.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Hirose Gold Plated Crimp Terminal, Female Contact, HIF3 Series, Max 0.12mm²
Available Stock
615
Estimated Ship Time:4-6 working days
1+$0.083
- +
Ext. Price(USD):$0.08
MOQ:1
Mult:1
SPQ:1
Contacts Crimp 203nm Gold 28-30 AWG Press-Fit
Available Stock
850
Estimated Ship Time:6-7 working days
20+$0.0657
- +
Ext. Price(USD):$1.31
MOQ:20
Mult:20
Available Stock
5,965
Estimated Ship Time:6-13 working days
10+$0.6831
25+$0.6107
6,000+$0.4093
12,000+$0.3888
- +
Ext. Price(USD):$14.34
MOQ:21
Mult:1
SPQ:1
Crimp, Gold, 24-28 AWG, Press-In
Available Stock
3,947
Estimated Ship Time:6-13 working days
25+$0.1656
100+$0.1576
5,000+$0.1166
10,000+$0.1058
- +
Ext. Price(USD):$14.07
MOQ:85
Mult:1
SPQ:1
Marked Rectangular Connector Terminal Crimp 1μm Tin 30 AWG Press-Fit
Available Stock
2,289
Estimated Ship Time:6-13 working days
100+$0.1323
1,000+$0.1102
2,500+$0.0972
5,000+$0.0918
10,000+$0.0896
- +
Ext. Price(USD):$14.02
MOQ:106
Mult:1
SPQ:1
Connector Headers and PCB Receptacles, Crimp, Tin-Plated, 16-18 AWG, Press-Fit
Available Stock
8,115
Estimated Ship Time:6-13 working days
25+$0.2162
100+$0.2059
5,000+$0.1458
10,000+$0.1382
- +
Ext. Price(USD):$14.05
MOQ:65
Mult:1
SPQ:1
Connector Headers and PCB Receptacles, Crimp, Gold, 30 AWG, Press-Fit
Available Stock
9,355
Estimated Ship Time:6-13 working days
25+$0.2162
100+$0.2059
5,000+$0.1523
10,000+$0.1382
- +
Ext. Price(USD):$14.05
MOQ:65
Mult:1
SPQ:1
Power to the Board Crimp Terminal, Gold Plated, 203nm, 8 AWG
Available Stock
4,954
Estimated Ship Time:6-13 working days
1+$2.622
10+$2.231
25+$1.903
100+$1.4904
300+$1.3068
- +
Ext. Price(USD):$15.73
MOQ:6
Mult:1
SPQ:1
Power to Board Connector, Crimp, 250nm, Gold Plated, 24-28 AWG, Wire Mount
Available Stock
182,643
Estimated Ship Time:6-13 working days
25+$0.1909
100+$0.1817
5,000+$0.1285
10,000+$0.1069
- +
Ext. Price(USD):$14.12
MOQ:74
Mult:1
SPQ:1
Hirose Gold Plated Crimp Terminal, Female Contact, HIF3B Series, Max 0.2mm²
Available Stock
3,030
Estimated Ship Time:6-13 working days
10+$0.6337
25+$0.5658
5,000+$0.3812
10,000+$0.3748
- +
Ext. Price(USD):$14.57
MOQ:23
Mult:1
SPQ:1
Available Stock
10,627
Estimated Ship Time:5-12 working days
300+$0.1991
2,500+$0.1626
100,000+$0.1247
150,000+$0.1243
- +
Ext. Price(USD):$59.73
MOQ:300
Mult:100
SPQ:100
Hirose Tin-Plated Crimp Terminal, Female Contact, DF62 Series, Max 0.05mm²
Available Stock
300
Estimated Ship Time:5-10 working days
100+$0.2071
500+$0.2009
1,000+$0.1946
5,000+$0.1922
10,000+$0.1869
- +
Ext. Price(USD):$20.71
MOQ:100
Mult:100
25 / PageGoto