Rectangular Connector Contacts

Results:

Rectangular connector contacts include separately ordered pins, sockets and crimp terminals for compatible connector housings. Begin with the manufacturer series and housing part number, then match the cavity, contact gender, wire range, termination, plating and application tooling. Similar appearance or wire size alone does not establish compatibility.

Lock the Housing Series Before Selecting a Contact

The housing determines which contact family and retention geometry can be used. Follow the approved compatibility path instead of selecting a terminal from its shape alone.

Manufacturer series → Housing part number → Cavity and contact size → Pin or socket → Approved contact

Use the housing datasheet or application specification to find the compatible contact part number. The same connector series may use different contacts for conductor size, insulation diameter, plating, sealing or production packaging. If the housing has not been selected, start with Rectangular Connector Housings.

Match Both Ends of the Contact

Each contact must fit the mating interface, lock into the correct housing cavity and accept the intended wire. Record all three interfaces before comparing stock or pricing.

Contact section What must match Fields to verify
Mating end The opposite conductive contact Pin, socket or non-gendered type; contact size and finish
Housing interface The cavity and retention system Series, cavity size, locking lance and insertion direction
Wire end The conductor and insulation AWG or cross-sectional area, conductor type and insulation diameter
Termination area The specified assembly process Crimp, solder, press-fit or other manufacturer-approved method

For a complete PCB header, wire housing and terminal combination, compare the available Wire to Board Connectors and verify every component against the same product series.

Choose the Contact Construction and Packaging

Contact form Selection focus
Stamped and formed Wire and insulation range, open-barrel geometry, reel format and specified crimp die
Machined or solid Contact size, conductor range, electrical load and dedicated tooling
Loose-piece packaging Prototype, service or manual assembly requirements
Reel or strip packaging Applicator compatibility, feed direction, carrier pitch and production quantity

Match the Wire, Finish and Electrical Load

  1. Confirm the complete conductor range in AWG or square millimetres.
  2. Check conductor stranding and the permitted insulation outside diameter.
  3. Compare contact material, tin or gold finish, and any specified plating thickness.
  4. Verify current rating under the stated wire, contact and temperature conditions.
  5. Check operating temperature, mating durability, vibration and environmental exposure.
Contact finish should be evaluated as part of the complete mating pair. Confirm that both sides use finishes approved by the connector manufacturer for the required environment and mating life.

Include Tooling in the Contact Selection

For crimp contacts, identify the manufacturer-specified hand tool or applicator, locator, die set, strip length and crimp-height requirements. Production inspection may also include conductor position, insulation support, bellmouth, pull force and contact deformation.

After termination, insert the contact in the specified direction until its retention feature locks into the housing. Use the approved extraction tool when removal is required. The guide to connector pins, crimping, soldering and IDC provides additional guidance on termination methods and crimp inspection.

Create a Contact Procurement Record

Record the housing series and part number, contact part number, pin or socket type, wire range, insulation diameter, termination, plating, packaging and required tooling. This provides a more reliable basis for replacement and production sourcing than appearance or wire size alone.

If the required interface or connector family has not yet been determined, return to the broader Rectangular Connectors range before selecting individual contacts.

Read More
Rectangular Connector ContactsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Connector Headers and PCB Receptacles Crimp Tin 18-22 AWG Press-In 18.1mm L × 2.8mm H
Available Stock
198
Estimated Ship Time:4-6 working days
1+$0.1318
- +
Ext. Price(USD):$0.13
MOQ:1
Mult:1
SPQ:1
Hirose Gold Plated Crimp Terminal, HIF3B Series, Max 0.3mm²
Pre-order
2,000
Factory Lead Time:14-26 weeks
2,000+$0.1849
- +
Ext. Price(USD):$369.80
MOQ:2,000
Mult:100
SPQ:100
Marked Crimp Terminal, Gold Plated, 203nm, 18-22 AWG, Press-In
Pre-order
6,000
Factory Lead Time:14-26 weeks
6,000+$0.1896
- +
Ext. Price(USD):$1,137.60
MOQ:6,000
Mult:6,000
SPQ:6,000
Power Connector, Crimp, Tin-Plated, 20-22 AWG, Press-Fit
Available Stock
9,940
Estimated Ship Time:5-9 working days
22+
10+$0.095
50+$0.0734
150+$0.0721
- +
Ext. Price(USD):$0.95
MOQ:10
Mult:5
SPQ:10,000
Rectangular Connector, Crimp, Gold Plated, 24-28 AWG, Press-Fit
Available Stock
2,550
Estimated Ship Time:14-17 working days
100+$0.3494
300+$0.263
5,000+$0.1831
10,000+$0.1831
- +
Ext. Price(USD):$50.31
MOQ:144
Mult:1
SPQ:1
Connector Headers and PCB Receptacles, Crimp, Tin, 24-28 AWG, Press-Fit
Available Stock
30
Estimated Ship Time:4-6 working days
1+$0.0901
1,000+$0.0828
- +
Ext. Price(USD):$0.09
MOQ:1
Mult:1
SPQ:1
Connector Headers & PCB Receptacles, Crimp, 16-18 AWG, Press-Fit
Available Stock
20
Estimated Ship Time:6-7 working days
20+$0.4446
- +
Ext. Price(USD):$8.89
MOQ:20
Mult:20
Connector Headers and PCB Receptacles IDC Tin-Plated 24 AWG Wire Mount 10.5mm L × 1.95mm H
Available Stock
1,620
Estimated Ship Time:14-17 working days
1,000+$0.0397
4,000+$0.0288
5,000+$0.0267
10,000+$0.0244
30,000+$0.0244
- +
Ext. Price(USD):$50.02
MOQ:1,260
Mult:1
SPQ:1
Marked Crimp Terminal, Gold Plated, 203nm, 18-22 AWG, Press-In
Available Stock
10
Estimated Ship Time:4-6 working days
1+$1.3979
- +
Ext. Price(USD):$1.39
MOQ:1
Mult:1
SPQ:1
Connector Headers and PCB Receptacles, IDC, Tin-Plated, 28 AWG, Wire Mount
Available Stock
5,410
Estimated Ship Time:6-7 working days
20+$0.0298
- +
Ext. Price(USD):$0.59
MOQ:20
Mult:20
Hirose Tin-Plated Crimp Terminal Male Contact DF3 Series Max 0.2mm²
Available Stock
824
Estimated Ship Time:14-17 working days
500+$0.074
1,000+$0.0572
10,000+$0.0421
30,000+$0.0421
- +
Ext. Price(USD):$50.02
MOQ:676
Mult:1
SPQ:1
Rectangular Connector, Crimp, Gold Plated, 24-28 AWG, Press-Fit
Available Stock
400
Estimated Ship Time:14-17 working days
100+$0.3699
300+$0.2836
5,000+$0.2023
10,000+$0.2
- +
Ext. Price(USD):$50.30
MOQ:136
Mult:1
SPQ:1
I/O Connectors
Pre-order
1,000
Factory Lead Time:14-26 weeks
1,000+$0.5004
- +
Ext. Price(USD):$500.40
MOQ:1,000
Mult:100
SPQ:100
Automotive Connectors, Female Terminals, Crimp, Tin-Plated, 24-28 AWG, Push-In
Available Stock
20,000
Estimated Ship Time:3-5 working days
10,000+$0.0233
30,000+$0.0229
50,000+$0.0223
- +
Ext. Price(USD):$233.00
MOQ:10,000
Mult:10,000
Connector Headers and PCB Receptacles, IDC, Tin-Plated, 24 AWG, Wire Mount
Available Stock
9,890
Estimated Ship Time:6-7 working days
22+
20+$0.0901
100+$0.0467
- +
Ext. Price(USD):$1.80
MOQ:20
Mult:20
Connector Headers and PCB Receptacles, Crimp, Tin, 26-30 AWG, Press-Fit
Available Stock
4,500
Estimated Ship Time:5-7 working days
1+$0.0331
- +
Ext. Price(USD):$0.03
MOQ:1
Mult:1
SPQ:10,000
Connector Headers & PCB Receptacles, Crimp, Gold Plated, 22-26 AWG, Insertion
Available Stock
360
Estimated Ship Time:4-6 working days
1+$0.1245
- +
Ext. Price(USD):$0.12
MOQ:1
Mult:1
SPQ:1
Hirose DF63 Series Receptacle, Plug, For DF63 Connector
Available Stock
9
Estimated Ship Time:4-6 working days
1+$0.0979
- +
Ext. Price(USD):$0.09
MOQ:1
Mult:1
SPQ:1
Automotive Connector, Male Terminal, Crimp, Tin Plated, 24-28 AWG, Push-In
Available Stock
20,000
Estimated Ship Time:4-6 working days
24+
10,000+$0.0878
- +
Ext. Price(USD):$878.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Connector Headers and PCB Receptacles, Crimp, Tin, 24-28 AWG, Press-Fit
Available Stock
1
Estimated Ship Time:4-6 working days
1+$0.0267
- +
Ext. Price(USD):$0.02
MOQ:1
Mult:1
SPQ:1
Hirose Gold Plated Crimp Terminal, Male Contact, DF3 Series, Max 0.2mm²
Available Stock
13
Estimated Ship Time:4-6 working days
1+$0.1601
- +
Ext. Price(USD):$0.16
MOQ:1
Mult:1
SPQ:1
Marked Rectangular Connector Contact, Crimp, 200nm Gold Plated, 22 AWG, Press-Fit
Available Stock
10
Estimated Ship Time:4-6 working days
1+$0.2148
- +
Ext. Price(USD):$0.21
MOQ:1
Mult:1
SPQ:1
Hirose Tin-Plated Crimp Terminal, Male Contact, DF1E Series, Max 0.2mm²
Available Stock
25
Estimated Ship Time:4-6 working days
1+$0.1112
- +
Ext. Price(USD):$0.11
MOQ:1
Mult:1
SPQ:1
Hirose DF1E Series Receptacle Connector for DF1E Series
Available Stock
48
Estimated Ship Time:4-6 working days
1+$0.0536
- +
Ext. Price(USD):$0.05
MOQ:1
Mult:1
SPQ:1
Hirose Tin-Plated Crimp Terminal Male Contact DF1B Series Max 0.5mm²
Available Stock
12,212
Estimated Ship Time:4-6 working days
1+$0.0379
- +
Ext. Price(USD):$0.03
MOQ:1
Mult:1
SPQ:1
25 / PageGoto