Rectangular Connector Contacts

Results:

Rectangular connector contacts include separately ordered pins, sockets and crimp terminals for compatible connector housings. Begin with the manufacturer series and housing part number, then match the cavity, contact gender, wire range, termination, plating and application tooling. Similar appearance or wire size alone does not establish compatibility.

Lock the Housing Series Before Selecting a Contact

The housing determines which contact family and retention geometry can be used. Follow the approved compatibility path instead of selecting a terminal from its shape alone.

Manufacturer series → Housing part number → Cavity and contact size → Pin or socket → Approved contact

Use the housing datasheet or application specification to find the compatible contact part number. The same connector series may use different contacts for conductor size, insulation diameter, plating, sealing or production packaging. If the housing has not been selected, start with Rectangular Connector Housings.

Match Both Ends of the Contact

Each contact must fit the mating interface, lock into the correct housing cavity and accept the intended wire. Record all three interfaces before comparing stock or pricing.

Contact section What must match Fields to verify
Mating end The opposite conductive contact Pin, socket or non-gendered type; contact size and finish
Housing interface The cavity and retention system Series, cavity size, locking lance and insertion direction
Wire end The conductor and insulation AWG or cross-sectional area, conductor type and insulation diameter
Termination area The specified assembly process Crimp, solder, press-fit or other manufacturer-approved method

For a complete PCB header, wire housing and terminal combination, compare the available Wire to Board Connectors and verify every component against the same product series.

Choose the Contact Construction and Packaging

Contact form Selection focus
Stamped and formed Wire and insulation range, open-barrel geometry, reel format and specified crimp die
Machined or solid Contact size, conductor range, electrical load and dedicated tooling
Loose-piece packaging Prototype, service or manual assembly requirements
Reel or strip packaging Applicator compatibility, feed direction, carrier pitch and production quantity

Match the Wire, Finish and Electrical Load

  1. Confirm the complete conductor range in AWG or square millimetres.
  2. Check conductor stranding and the permitted insulation outside diameter.
  3. Compare contact material, tin or gold finish, and any specified plating thickness.
  4. Verify current rating under the stated wire, contact and temperature conditions.
  5. Check operating temperature, mating durability, vibration and environmental exposure.
Contact finish should be evaluated as part of the complete mating pair. Confirm that both sides use finishes approved by the connector manufacturer for the required environment and mating life.

Include Tooling in the Contact Selection

For crimp contacts, identify the manufacturer-specified hand tool or applicator, locator, die set, strip length and crimp-height requirements. Production inspection may also include conductor position, insulation support, bellmouth, pull force and contact deformation.

After termination, insert the contact in the specified direction until its retention feature locks into the housing. Use the approved extraction tool when removal is required. The guide to connector pins, crimping, soldering and IDC provides additional guidance on termination methods and crimp inspection.

Create a Contact Procurement Record

Record the housing series and part number, contact part number, pin or socket type, wire range, insulation diameter, termination, plating, packaging and required tooling. This provides a more reliable basis for replacement and production sourcing than appearance or wire size alone.

If the required interface or connector family has not yet been determined, return to the broader Rectangular Connectors range before selecting individual contacts.

Read More
Rectangular Connector ContactsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Connector Headers and PCB Receptacles Crimp Gold Plated 22 AWG Press-In
Available Stock
5,300
Estimated Ship Time:5-7 working days
1+$0.0622
- +
Ext. Price(USD):$0.06
MOQ:1
Mult:1
SPQ:100
Crimp 26-28 AWG
Pre-order
100,000
Factory Lead Time:14-26 weeks
10,000+$0.1259
- +
Ext. Price(USD):$1,259.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Connector Headers and PCB Receptacles, IDC, Tin-Plated, 24 AWG, Wire Mount
Available Stock
7,630
Estimated Ship Time:6-7 working days
20+$0.0387
- +
Ext. Price(USD):$0.77
MOQ:20
Mult:20
Board to Board & Mezzanine Connectors Crimp, Tin, 20-22 AWG Push-In
Available Stock
10
Estimated Ship Time:4-6 working days
1+$0.0712
- +
Ext. Price(USD):$0.07
MOQ:1
Mult:1
SPQ:1
Connector Headers and PCB Receptacles, Crimp, Gold Plated, 20-22 AWG, Press-Fit
Available Stock
57
Estimated Ship Time:4-6 working days
1+$0.102
- +
Ext. Price(USD):$0.10
MOQ:1
Mult:1
SPQ:1
Contacts, Crimp, Tin, 26-30 AWG, Push-In
Available Stock
300
Estimated Ship Time:4-6 working days
1+$0.0111
- +
Ext. Price(USD):$0.01
MOQ:1
Mult:1
SPQ:1
Crimp, Gold, 14-16 AWG
Available Stock
4,000
Estimated Ship Time:4-6 working days
1+$0.5395
- +
Ext. Price(USD):$0.53
MOQ:1
Mult:1
SPQ:1
Contacts, Crimp, Gold, 22-26 AWG, Press-In
Available Stock
10,000
Estimated Ship Time:5-7 working days
26+
1+$0.1944
- +
Ext. Price(USD):$0.19
MOQ:1
Mult:1
SPQ:10,000
Hirose Gold Plated Crimp Terminal, Female Contact, A3B Series, Max 0.03mm²
Available Stock
10,000
Estimated Ship Time:14-17 working days
1,000+$0.0493
4,000+$0.0411
5,000+$0.0368
10,000+$0.0339
30,000+$0.0316
- +
Ext. Price(USD):$50.03
MOQ:1,015
Mult:1
SPQ:1
Automotive Connectors, Female Terminals, Crimp, Tin-Plated, 24-28 AWG, Push-In
Available Stock
4,100
Estimated Ship Time:4-6 working days
21+
1+$0.0267
- +
Ext. Price(USD):$0.02
MOQ:1
Mult:1
SPQ:1
Hirose RP34 Series Receptacle Contact, Crimp Terminal for Small I/O Connectors
Available Stock
5,000
Estimated Ship Time:5-7 working days
1+$0.1556
- +
Ext. Price(USD):$0.15
MOQ:1
Mult:1
SPQ:8,000
Rectangular Connector, Crimp, Silver Plated, 24-28 AWG, Push-In
Available Stock
1,900
Estimated Ship Time:14-17 working days
1+$0.2206
300+$0.1767
10,000+$0.1119
30,000+$0.1119
- +
Ext. Price(USD):$50.07
MOQ:227
Mult:1
SPQ:1
Power to the Board Crimp 760nm Gold 16-18 AWG
Available Stock
1,677
Estimated Ship Time:5-9 working days
22+
5+$0.5873
15+$0.445
30+$0.4376
- +
Ext. Price(USD):$2.93
MOQ:5
Mult:1
SPQ:3,000
Hirose DF11 Series Tin-Plated Crimp Terminal, Female Contact, Max 0.05mm²
Available Stock
10
Estimated Ship Time:4-6 working days
22+
1+$0.1176
500+$0.1081
- +
Ext. Price(USD):$0.11
MOQ:1
Mult:1
SPQ:1
Connector Headers and PCB Receptacles, Crimp, Gold, 24-28 AWG, Press-In
Available Stock
268
Estimated Ship Time:6-7 working days
22+
20+$0.1819
100+$0.0941
- +
Ext. Price(USD):$3.63
MOQ:20
Mult:20
Connector Headers and PCB Receptacles IDC Tin-Plated 26 AWG Wire Mount
Available Stock
70
Estimated Ship Time:4-6 working days
1+$0.0516
- +
Ext. Price(USD):$0.05
MOQ:1
Mult:1
SPQ:1
Automotive Connectors, Female Terminals, Crimp, Tin-Plated, 20-22 AWG, Push-In
Available Stock
658
Estimated Ship Time:5-9 working days
22+
20+$0.0512
150+$0.0398
300+$0.0391
- +
Ext. Price(USD):$1.02
MOQ:20
Mult:10
SPQ:10,000
Connector Headers & PCB Receptacles, Crimp, Gold, 30 AWG, Press-Fit, 13.9mm L
Available Stock
1,000
Estimated Ship Time:6-7 working days
22+
100+$0.1583
- +
Ext. Price(USD):$15.83
MOQ:100
Mult:100
Connector Headers & PCB Receptacles, Crimp, Gold Plated, 22-26 AWG, Insertion
Available Stock
3,000
Estimated Ship Time:14-17 working days
300+$0.1466
500+$0.1302
10,000+$0.087
30,000+$0.087
- +
Ext. Price(USD):$50.13
MOQ:342
Mult:1
SPQ:1
Rectangular Connector, Crimp, Silver Plated, 24-28 AWG, Push-In
Available Stock
9,600
Estimated Ship Time:14-17 working days
300+$0.1466
500+$0.1274
10,000+$0.0848
30,000+$0.0848
- +
Ext. Price(USD):$50.13
MOQ:342
Mult:1
SPQ:1
I/O Connectors
Pre-order
900
Factory Lead Time:14-26 weeks
90+$57.7551
- +
Ext. Price(USD):$5,197.95
MOQ:90
Mult:18
SPQ:18
Connector Headers and PCB Receptacles, IDC, Tin-Plated, 28 AWG, Wire Mount
Available Stock
9,580
Estimated Ship Time:14-17 working days
1,000+$0.0397
4,000+$0.0288
5,000+$0.0267
10,000+$0.0244
30,000+$0.0244
- +
Ext. Price(USD):$50.02
MOQ:1,260
Mult:1
SPQ:1
Connector Headers and PCB Receptacles, Crimp, Gold Plated, 30-32 AWG, Push-In
Pre-order
20,000
Factory Lead Time:14-26 weeks
20,000+$0.0247
- +
Ext. Price(USD):$494.00
MOQ:20,000
Mult:20,000
SPQ:20,000
Headers & Wire Housings
Available Stock
6,467
Estimated Ship Time:14-17 working days
500+$0.0795
1,000+$0.066
10,000+$0.0538
30,000+$0.0527
- +
Ext. Price(USD):$50.00
MOQ:629
Mult:1
SPQ:1
Connector Headers and PCB Receptacles, Crimp, Tin-Plated, 20-22 AWG, Press-Fit
Available Stock
3,050
Estimated Ship Time:5-7 working days
1+$0.1322
- +
Ext. Price(USD):$0.13
MOQ:1
Mult:1
SPQ:5,000
25 / PageGoto