Rectangular Connector Contacts

Results:

Rectangular connector contacts include separately ordered pins, sockets and crimp terminals for compatible connector housings. Begin with the manufacturer series and housing part number, then match the cavity, contact gender, wire range, termination, plating and application tooling. Similar appearance or wire size alone does not establish compatibility.

Lock the Housing Series Before Selecting a Contact

The housing determines which contact family and retention geometry can be used. Follow the approved compatibility path instead of selecting a terminal from its shape alone.

Manufacturer series → Housing part number → Cavity and contact size → Pin or socket → Approved contact

Use the housing datasheet or application specification to find the compatible contact part number. The same connector series may use different contacts for conductor size, insulation diameter, plating, sealing or production packaging. If the housing has not been selected, start with Rectangular Connector Housings.

Match Both Ends of the Contact

Each contact must fit the mating interface, lock into the correct housing cavity and accept the intended wire. Record all three interfaces before comparing stock or pricing.

Contact section What must match Fields to verify
Mating end The opposite conductive contact Pin, socket or non-gendered type; contact size and finish
Housing interface The cavity and retention system Series, cavity size, locking lance and insertion direction
Wire end The conductor and insulation AWG or cross-sectional area, conductor type and insulation diameter
Termination area The specified assembly process Crimp, solder, press-fit or other manufacturer-approved method

For a complete PCB header, wire housing and terminal combination, compare the available Wire to Board Connectors and verify every component against the same product series.

Choose the Contact Construction and Packaging

Contact form Selection focus
Stamped and formed Wire and insulation range, open-barrel geometry, reel format and specified crimp die
Machined or solid Contact size, conductor range, electrical load and dedicated tooling
Loose-piece packaging Prototype, service or manual assembly requirements
Reel or strip packaging Applicator compatibility, feed direction, carrier pitch and production quantity

Match the Wire, Finish and Electrical Load

  1. Confirm the complete conductor range in AWG or square millimetres.
  2. Check conductor stranding and the permitted insulation outside diameter.
  3. Compare contact material, tin or gold finish, and any specified plating thickness.
  4. Verify current rating under the stated wire, contact and temperature conditions.
  5. Check operating temperature, mating durability, vibration and environmental exposure.
Contact finish should be evaluated as part of the complete mating pair. Confirm that both sides use finishes approved by the connector manufacturer for the required environment and mating life.

Include Tooling in the Contact Selection

For crimp contacts, identify the manufacturer-specified hand tool or applicator, locator, die set, strip length and crimp-height requirements. Production inspection may also include conductor position, insulation support, bellmouth, pull force and contact deformation.

After termination, insert the contact in the specified direction until its retention feature locks into the housing. Use the approved extraction tool when removal is required. The guide to connector pins, crimping, soldering and IDC provides additional guidance on termination methods and crimp inspection.

Create a Contact Procurement Record

Record the housing series and part number, contact part number, pin or socket type, wire range, insulation diameter, termination, plating, packaging and required tooling. This provides a more reliable basis for replacement and production sourcing than appearance or wire size alone.

If the required interface or connector family has not yet been determined, return to the broader Rectangular Connectors range before selecting individual contacts.

Read More
Rectangular Connector ContactsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Rectangular Connector, Crimp, Silver Plated, 24-28 AWG, Push-In
Available Stock
4,016
Estimated Ship Time:14-17 working days
300+$0.1562
500+$0.1397
10,000+$0.0949
30,000+$0.0949
- +
Ext. Price(USD):$50.14
MOQ:321
Mult:1
SPQ:1
Connector Headers & PCB Receptacles, Crimp, Gold Plated, 24-28 AWG, Press-Fit, 12mm L × 2mm H
Available Stock
11,805
Estimated Ship Time:5-7 working days
1+$0.2819
- +
Ext. Price(USD):$0.28
MOQ:1
Mult:1
SPQ:10,000
Crimp, Gold Plated, 30-32 AWG, Push-In
Available Stock
60,000
Estimated Ship Time:5-7 working days
25+
1+$0.0466
- +
Ext. Price(USD):$0.04
MOQ:1
Mult:1
SPQ:30,000
Hirose Heavy Duty Power Connector Contact, PQ50 Series, Crimp Terminal, Plug, 28.35mm x 3mm x 4.55mm
Pre-order
3,500
Factory Lead Time:14-26 weeks
3,500+$0.4288
- +
Ext. Price(USD):$1,500.80
MOQ:3,500
Mult:3,500
SPQ:3,500
Connector Headers & PCB Receptacles, Crimp, Gold Plated, 22-26 AWG, Insertion
Available Stock
2,490
Estimated Ship Time:14-17 working days
500+$0.0603
1,000+$0.0603
2,000+$0.0559
4,000+$0.0559
- +
Ext. Price(USD):$50.04
MOQ:830
Mult:1
SPQ:1
Connector Headers and PCB Receptacles Crimp Tin 20-22 AWG Press-Fit 13.9mm L
Available Stock
99
Estimated Ship Time:3-5 working days
20+
1+$0.0494
5,000+$0.0439
10,000+$0.0379
- +
Ext. Price(USD):$0.04
MOQ:1
Mult:1
SPQ:1
Connector Headers and PCB Receptacles, Crimp, Tin, 24-28 AWG, Press-Fit
Available Stock
14
Estimated Ship Time:4-6 working days
1+$0.0125
- +
Ext. Price(USD):$0.01
MOQ:1
Mult:1
SPQ:1
Connector Headers and PCB Receptacles, Crimp, Tin, 30 AWG, Press-Fit
Available Stock
80
Estimated Ship Time:3-5 working days
21+
10+$0.0182
50+$0.0178
100+$0.0171
- +
Ext. Price(USD):$0.18
MOQ:10
Mult:10
SPQ:10
Automotive Connector Crimp Terminal, Tin Plated, 20 AWG, 22 AWG, 22-20 AWG Wire Mount, 6.2mm × 1.5mm × 1.7mm
Available Stock
20,000
Estimated Ship Time:3-5 working days
10+$0.1458
3,000+$0.1222
- +
Ext. Price(USD):$1.45
MOQ:10
Mult:1
Hirose Gold Plated Crimp Terminal Female Contact, DF11 Series, Max 0.3mm²
Available Stock
2
Estimated Ship Time:4-6 working days
1+$0.0956
1,000+$0.0881
- +
Ext. Price(USD):$0.09
MOQ:1
Mult:1
SPQ:1
Connector Headers and PCB Receptacles, Crimp, Gold, 22-26 AWG, Push-In
Pre-order
10,000
Factory Lead Time:14-26 weeks
10,000+$0.2487
- +
Ext. Price(USD):$2,487.00
MOQ:10,000
Mult:10,000
SPQ:10,000
FFC-FPC Connector Crimp Gold 28-30 AWG Press-In
Available Stock
20
Estimated Ship Time:6-7 working days
20+$0.1388
- +
Ext. Price(USD):$2.77
MOQ:20
Mult:20
Connector Headers and PCB Receptacles, Crimp, 203nm Gold, 26-30 AWG, Press-Fit
Available Stock
2,155
Estimated Ship Time:14-17 working days
300+$0.1425
500+$0.1233
10,000+$0.0836
30,000+$0.0814
- +
Ext. Price(USD):$50.01
MOQ:351
Mult:1
SPQ:1
Connector Headers and PCB Receptacles, Crimp, Tin, 26-30 AWG, Press-Fit
Available Stock
100
Estimated Ship Time:4-6 working days
1+$0.1285
500+$0.1182
- +
Ext. Price(USD):$0.12
MOQ:1
Mult:1
SPQ:1
Hirose Gold Plated Crimp Terminal, Female Contact, A3B Series, Max 0.12mm²
Available Stock
6
Estimated Ship Time:4-6 working days
1+$0.0494
- +
Ext. Price(USD):$0.04
MOQ:1
Mult:1
SPQ:1
Connector Headers & PCB Receptacles, Crimp, 203nm Gold, 24-28 AWG, Press-In, 12mm L × 2mm H
Available Stock
50,000
Estimated Ship Time:4-6 working days
20+
10,000+$0.0796
20,000+$0.0783
40,000+$0.0764
- +
Ext. Price(USD):$796.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Connector Headers and PCB Receptacles, Crimp, Gold Plated, 30-32 AWG, Push-In
Available Stock
2,750
Estimated Ship Time:3-5 working days
19+
1+$0.0303
10,000+$0.0266
20,000+$0.0227
- +
Ext. Price(USD):$0.03
MOQ:1
Mult:1
SPQ:20,000
Connector Headers & PCB Receptacles, Crimp, Gold, 26-30 AWG, Press-Fit, 5.8mm H
Available Stock
50,000
Estimated Ship Time:4-6 working days
20+
10,000+$0.0255
20,000+$0.025
40,000+$0.0244
- +
Ext. Price(USD):$255.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Hirose Gold Plated Crimp Terminal, Female Contact, DF62 Series, Max 0.3mm²
Available Stock
13,878
Estimated Ship Time:14-17 working days
300+$0.1206
500+$0.1096
5,000+$0.083
10,000+$0.0817
- +
Ext. Price(USD):$50.04
MOQ:415
Mult:1
SPQ:1
Terminals, 22 AWG
Available Stock
14,980
Estimated Ship Time:5-7 working days
24+
1+$0.1069
- +
Ext. Price(USD):$0.10
MOQ:1
Mult:1
SPQ:10,000
Crimp Contact, Tin Plated, 24-28 AWG, Push-In
Available Stock
30,000
Estimated Ship Time:5-7 working days
22+
1+$0.0234
- +
Ext. Price(USD):$0.02
MOQ:1
Mult:1
SPQ:10,000
Automotive Connector, Female Terminal, Crimp, Tin-Plated, 26-30 AWG
Pre-order
10,000
Factory Lead Time:14-26 weeks
10,000+$0.0271
- +
Ext. Price(USD):$271.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Hirose Gold Plated Crimp Terminal, Female Contact, HIF3 Series, Max 0.5mm²
Available Stock
7
Estimated Ship Time:4-6 working days
1+$0.2965
- +
Ext. Price(USD):$0.29
MOQ:1
Mult:1
SPQ:1
Connector Headers and PCB Receptacles, Crimp, Gold, 30 AWG, Press-Fit
Available Stock
10,000
Estimated Ship Time:5-7 working days
25+
1+$0.1653
- +
Ext. Price(USD):$0.16
MOQ:1
Mult:1
SPQ:10,000
Connector Headers and PCB Receptacles, Crimp, Gold Plated, 26-28 AWG, Press-Fit
Available Stock
50
Estimated Ship Time:4-6 working days
1+$0.2272
- +
Ext. Price(USD):$0.22
MOQ:1
Mult:1
SPQ:1
25 / PageGoto