Rectangular Connector Contacts

Results:

Rectangular connector contacts include separately ordered pins, sockets and crimp terminals for compatible connector housings. Begin with the manufacturer series and housing part number, then match the cavity, contact gender, wire range, termination, plating and application tooling. Similar appearance or wire size alone does not establish compatibility.

Lock the Housing Series Before Selecting a Contact

The housing determines which contact family and retention geometry can be used. Follow the approved compatibility path instead of selecting a terminal from its shape alone.

Manufacturer series → Housing part number → Cavity and contact size → Pin or socket → Approved contact

Use the housing datasheet or application specification to find the compatible contact part number. The same connector series may use different contacts for conductor size, insulation diameter, plating, sealing or production packaging. If the housing has not been selected, start with Rectangular Connector Housings.

Match Both Ends of the Contact

Each contact must fit the mating interface, lock into the correct housing cavity and accept the intended wire. Record all three interfaces before comparing stock or pricing.

Contact section What must match Fields to verify
Mating end The opposite conductive contact Pin, socket or non-gendered type; contact size and finish
Housing interface The cavity and retention system Series, cavity size, locking lance and insertion direction
Wire end The conductor and insulation AWG or cross-sectional area, conductor type and insulation diameter
Termination area The specified assembly process Crimp, solder, press-fit or other manufacturer-approved method

For a complete PCB header, wire housing and terminal combination, compare the available Wire to Board Connectors and verify every component against the same product series.

Choose the Contact Construction and Packaging

Contact form Selection focus
Stamped and formed Wire and insulation range, open-barrel geometry, reel format and specified crimp die
Machined or solid Contact size, conductor range, electrical load and dedicated tooling
Loose-piece packaging Prototype, service or manual assembly requirements
Reel or strip packaging Applicator compatibility, feed direction, carrier pitch and production quantity

Match the Wire, Finish and Electrical Load

  1. Confirm the complete conductor range in AWG or square millimetres.
  2. Check conductor stranding and the permitted insulation outside diameter.
  3. Compare contact material, tin or gold finish, and any specified plating thickness.
  4. Verify current rating under the stated wire, contact and temperature conditions.
  5. Check operating temperature, mating durability, vibration and environmental exposure.
Contact finish should be evaluated as part of the complete mating pair. Confirm that both sides use finishes approved by the connector manufacturer for the required environment and mating life.

Include Tooling in the Contact Selection

For crimp contacts, identify the manufacturer-specified hand tool or applicator, locator, die set, strip length and crimp-height requirements. Production inspection may also include conductor position, insulation support, bellmouth, pull force and contact deformation.

After termination, insert the contact in the specified direction until its retention feature locks into the housing. Use the approved extraction tool when removal is required. The guide to connector pins, crimping, soldering and IDC provides additional guidance on termination methods and crimp inspection.

Create a Contact Procurement Record

Record the housing series and part number, contact part number, pin or socket type, wire range, insulation diameter, termination, plating, packaging and required tooling. This provides a more reliable basis for replacement and production sourcing than appearance or wire size alone.

If the required interface or connector family has not yet been determined, return to the broader Rectangular Connectors range before selecting individual contacts.

Read More
Rectangular Connector ContactsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Connector Headers and PCB Receptacles Crimp 1μm Tin 26-28 AWG Press-Fit 3.1mm L
In Stock6,474
2552+
10+$0.0375
100+$0.0281
5,000+$0.0112
10,000+$0.0102
- +
Ext. Price(USD):$0.37
MOQ:10
Mult:10
SPQ:35,000
Connector Headers and PCB Receptacles, Crimp, Tin-Plated, 20-22 AWG, Press-Fit
In Stock6
2544+
1+$0.0438
10+$0.0358
100+$0.0329
500+$0.0303
1,000+$0.0282
- +
Ext. Price(USD):$0.04
MOQ:1
Mult:1
SPQ:10,000
Connector Headers & PCB Receptacles, Crimp, Gold Plated, 28-30 AWG, Press-Fit, 5.1mm L
In Stock12,036
2609+
1+$0.0422
10+$0.0324
100+$0.029
500+$0.0263
1,000+$0.024
- +
Ext. Price(USD):$0.04
MOQ:1
Mult:1
SPQ:20,000
Crimp, Gold, 16-18 AWG
In Stock3,274
2630+
1+$0.6987
10+$0.5435
100+$0.4891
500+$0.4446
1,000+$0.4076
- +
Ext. Price(USD):$0.69
MOQ:1
Mult:1
SPQ:4,000
Connector Headers and PCB Receptacles, Crimp, Tin, 24-28 AWG, Press-Fit
In Stock1,136
2617+
1+$0.0469
10+$0.0384
100+$0.0352
500+$0.0325
1,000+$0.0302
- +
Ext. Price(USD):$0.04
MOQ:1
Mult:1
SPQ:10,000
Hirose DF11 Series Gold Plated Crimp Terminal, Female Contact
In Stock7,058
2616+
1+$0.1215
10+$0.0972
100+$0.0884
500+$0.081
1,000+$0.0748
- +
Ext. Price(USD):$0.12
MOQ:1
Mult:1
SPQ:10,000
Hirose Gold Plated Crimp Terminal, Female Contact, DF11 Series, Max 0.2mm²
In Stock157,494
2632+
1+$0.1017
10+$0.0625
100+$0.0452
500+$0.0397
1,000+$0.0354
- +
Ext. Price(USD):$0.10
MOQ:1
Mult:1
SPQ:10,000
CONN SOCKET, 22AWG, CRIMP, TIN
In Stock12,900
2604+
1+$0.0474
10+$0.0392
1,000+$0.0312
10,000+$0.0292
- +
Ext. Price(USD):$0.04
MOQ:1
Mult:1
SPQ:13,000
Connector Headers and PCB Receptacles Crimp Gold 22 AWG Press-In 6.2mm L
In Stock5,386
2608+
5+$0.0871
50+$0.0678
2,500+$0.0454
5,000+$0.0425
- +
Ext. Price(USD):$0.43
MOQ:5
Mult:1
SPQ:10,000
Connector Headers and PCB Receptacles, Crimp, Gold, 24-28 AWG, Press-In
In Stock4,968
2601+
1+$0.0931
10+$0.0755
100+$0.0635
500+$0.0588
1,000+$0.0548
- +
Ext. Price(USD):$0.09
MOQ:1
Mult:1
SPQ:10,000
Connector Headers & PCB Receptacles, Crimp, Gold Plated, 30 AWG, Press-Fit, 6.2mm L
In Stock9,398
2545+
1+$0.1057
10+$0.0864
100+$0.0792
500+$0.0731
1,000+$0.0679
- +
Ext. Price(USD):$0.10
MOQ:1
Mult:1
SPQ:10,000
Hirose Gold Plated Crimp Terminal, Female Contact, A3B Series, Max 0.12mm²
In Stock52
2509+
10+$0.058
100+$0.0462
5,000+$0.0309
10,000+$0.0292
- +
Ext. Price(USD):$0.58
MOQ:10
Mult:1
SPQ:10,000
Automotive Connector, Male Terminal, Crimp, Tin-Plated, 20-22 AWG, Press-Fit
In Stock9,896
2436+
1+$0.1392
10+$0.1111
10,000+$0.0758
20,000+$0.0729
- +
Ext. Price(USD):$0.13
MOQ:1
Mult:1
SPQ:10,000
Automotive Connector, Female Terminal, Crimp, Gold Plated, 24-28 AWG, Press-Fit
In Stock9,235
2221+
1+$0.1253
10+$0.0999
10,000+$0.0682
20,000+$0.0656
- +
Ext. Price(USD):$0.12
MOQ:1
Mult:1
SPQ:10,000
Connector Headers and PCB Receptacles, Crimp, Tin-Plated, 24-28 AWG, Press-Fit, 5.9mm L
In Stock9,627
2335+
1+$0.0367
10+$0.0293
10,000+$0.02
20,000+$0.0192
- +
Ext. Price(USD):$0.03
MOQ:1
Mult:1
SPQ:10,000
Connector Headers & PCB Receptacles, Crimp, Tin, 14-16 AWG, Press-Fit, 17mm L
In Stock68,290
2219+
1+$0.0696
10+$0.0556
2,500+$0.0379
5,000+$0.0365
- +
Ext. Price(USD):$0.06
MOQ:1
Mult:1
SPQ:2,500
Connector Headers and PCB Receptacles, Crimp, Tin, 30 AWG, Press-Fit
In Stock6,856
2408+
1+$0.0238
10,000+$0.0194
- +
Ext. Price(USD):$0.02
MOQ:1
Mult:1
SPQ:10,000
Hirose DF4 Series Receptacle Terminal, Male Contact, For DF4 Connectors
In Stock6,594
2435+
20+$0.0244
200+$0.0192
10,000+$0.0131
20,000+$0.0124
- +
Ext. Price(USD):$0.48
MOQ:20
Mult:1
SPQ:10,000
Automotive Connector Crimp Contact Tin Plated 1μm 12-14 AWG Wire Mount 25.6mm × 5.4mm × 5.6mm
In Stock600
24+
10+$0.4905
100+$0.4017
200+$0.3719
- +
Ext. Price(USD):$4.90
MOQ:10
Mult:1
SPQ:200
Connector Headers and PCB Receptacles, Crimp, Tin, 30 AWG, Press-Fit
Available Stock
2,960
Estimated Ship Time:4-6 working days
1+$0.0306
- +
Ext. Price(USD):$0.03
MOQ:1
Mult:1
SPQ:1
Hirose DF11 Series Receptacle Terminal, Male Plug, For DF11 Series Connector
Available Stock
1
Estimated Ship Time:4-6 working days
1+$0.083
- +
Ext. Price(USD):$0.08
MOQ:1
Mult:1
SPQ:1
Crimp, Gold Plated, 26-28 AWG
Pre-order
10,000
Factory Lead Time:14-26 weeks
10,000+$0.1227
- +
Ext. Price(USD):$1,227.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Hirose Tin-Plated Crimp Terminal, Male, DF62 Series, Max 0.2mm²
Available Stock
564
Estimated Ship Time:5-9 working days
22+
10+$0.1071
50+$0.1019
150+$0.1003
- +
Ext. Price(USD):$1.07
MOQ:10
Mult:5
SPQ:100
Connector Headers and PCB Receptacles, Crimp, Tin, 18-22 AWG, Press-Fit
Available Stock
45
Estimated Ship Time:4-6 working days
1+$0.0281
- +
Ext. Price(USD):$0.02
MOQ:1
Mult:1
SPQ:1
Power to the Board Crimp Terminal, 203nm, Gold, 10-12 AWG
Available Stock
600
Estimated Ship Time:5-7 working days
1+$0.9917
- +
Ext. Price(USD):$0.99
MOQ:1
Mult:1
SPQ:900
25 / PageGoto