Rectangular Connector Contacts

Results:

Rectangular connector contacts include separately ordered pins, sockets and crimp terminals for compatible connector housings. Begin with the manufacturer series and housing part number, then match the cavity, contact gender, wire range, termination, plating and application tooling. Similar appearance or wire size alone does not establish compatibility.

Lock the Housing Series Before Selecting a Contact

The housing determines which contact family and retention geometry can be used. Follow the approved compatibility path instead of selecting a terminal from its shape alone.

Manufacturer series → Housing part number → Cavity and contact size → Pin or socket → Approved contact

Use the housing datasheet or application specification to find the compatible contact part number. The same connector series may use different contacts for conductor size, insulation diameter, plating, sealing or production packaging. If the housing has not been selected, start with Rectangular Connector Housings.

Match Both Ends of the Contact

Each contact must fit the mating interface, lock into the correct housing cavity and accept the intended wire. Record all three interfaces before comparing stock or pricing.

Contact section What must match Fields to verify
Mating end The opposite conductive contact Pin, socket or non-gendered type; contact size and finish
Housing interface The cavity and retention system Series, cavity size, locking lance and insertion direction
Wire end The conductor and insulation AWG or cross-sectional area, conductor type and insulation diameter
Termination area The specified assembly process Crimp, solder, press-fit or other manufacturer-approved method

For a complete PCB header, wire housing and terminal combination, compare the available Wire to Board Connectors and verify every component against the same product series.

Choose the Contact Construction and Packaging

Contact form Selection focus
Stamped and formed Wire and insulation range, open-barrel geometry, reel format and specified crimp die
Machined or solid Contact size, conductor range, electrical load and dedicated tooling
Loose-piece packaging Prototype, service or manual assembly requirements
Reel or strip packaging Applicator compatibility, feed direction, carrier pitch and production quantity

Match the Wire, Finish and Electrical Load

  1. Confirm the complete conductor range in AWG or square millimetres.
  2. Check conductor stranding and the permitted insulation outside diameter.
  3. Compare contact material, tin or gold finish, and any specified plating thickness.
  4. Verify current rating under the stated wire, contact and temperature conditions.
  5. Check operating temperature, mating durability, vibration and environmental exposure.
Contact finish should be evaluated as part of the complete mating pair. Confirm that both sides use finishes approved by the connector manufacturer for the required environment and mating life.

Include Tooling in the Contact Selection

For crimp contacts, identify the manufacturer-specified hand tool or applicator, locator, die set, strip length and crimp-height requirements. Production inspection may also include conductor position, insulation support, bellmouth, pull force and contact deformation.

After termination, insert the contact in the specified direction until its retention feature locks into the housing. Use the approved extraction tool when removal is required. The guide to connector pins, crimping, soldering and IDC provides additional guidance on termination methods and crimp inspection.

Create a Contact Procurement Record

Record the housing series and part number, contact part number, pin or socket type, wire range, insulation diameter, termination, plating, packaging and required tooling. This provides a more reliable basis for replacement and production sourcing than appearance or wire size alone.

If the required interface or connector family has not yet been determined, return to the broader Rectangular Connectors range before selecting individual contacts.

Read More
Rectangular Connector ContactsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Hirose Gold Plated Crimp Terminal, Female Contact, DF62 Series, Max 0.3mm²
In Stock14,141
2617+
1+$0.1087
10+$0.0869
100+$0.0725
500+$0.0669
1,000+$0.0621
- +
Ext. Price(USD):$0.10
MOQ:1
Mult:1
SPQ:15,000
Crimp Terminal, Gold Plated 200nm, 28-30 AWG
In Stock144,543
2631+
1+$0.0728
10+$0.052
100+$0.0455
500+$0.0405
1,000+$0.0365
- +
Ext. Price(USD):$0.07
MOQ:1
Mult:1
SPQ:20,000
Automotive Connector Terminal, Female, Crimp, Gold Plated, 20-22 AWG, Push-In
In Stock5,235
2425+
1+$0.1841
10+$0.1473
100+$0.1339
500+$0.1228
1,000+$0.1133
- +
Ext. Price(USD):$0.18
MOQ:1
Mult:1
SPQ:10,000
Crimp Contact, Tin Plated, 32 AWG
In Stock159,780
2637+
10+$0.0455
100+$0.0342
5,000+$0.0195
10,000+$0.0171
- +
Ext. Price(USD):$0.45
MOQ:10
Mult:10
SPQ:40,000
Hirose Gold Plated Crimp Terminal, Female Contact, HIF3 Series, Max 0.3mm²
In Stock25
2438+
1+$0.3002
10+$0.2456
100+$0.2251
500+$0.2078
1,000+$0.193
- +
Ext. Price(USD):$0.30
MOQ:1
Mult:1
SPQ:10,000
Connector Headers and PCB Receptacles Crimp Gold 203nm 22 AWG Press-Fit 14.45mm L
In Stock9,681
2604+
1+$0.1346
10+$0.1047
1,000+$0.0785
5,000+$0.0724
- +
Ext. Price(USD):$0.13
MOQ:1
Mult:1
SPQ:15,000
Crimp, 203nm, Gold, 20-22 AWG
In Stock14,498
2612+
1+$0.2374
10+$0.1578
100+$0.1352
500+$0.1182
1,000+$0.1051
- +
Ext. Price(USD):$0.23
MOQ:1
Mult:1
SPQ:15,000
Hirose Gold Plated Crimp Terminal, Female Contact, DF3 Series, Max 0.2mm²
In Stock400
2608+
5+$0.0968
50+$0.0946
200+$0.0932
- +
Ext. Price(USD):$0.48
MOQ:5
Mult:1
SPQ:100
Hirose Tin-Plated Crimp Terminal, Female Contact, DF11 Series, Max 0.2mm²
In Stock32,658
2615+
50+$0.0187
500+$0.0147
20,000+$0.0096
50,000+$0.009
- +
Ext. Price(USD):$0.93
MOQ:50
Mult:10
SPQ:10,000
Hirose Tin-Plated Crimp Terminal, Female Contact, DF3 Series, Max 0.3mm²
In Stock152
2446+
10+$0.045
100+$0.0386
5,000+$0.0208
10,000+$0.0193
- +
Ext. Price(USD):$0.45
MOQ:10
Mult:10
SPQ:10,000
Hirose Gold Plated Crimp Terminal, Female Contact, DF19 Series, Max 0.08mm²
In Stock107,084
2602+
100+$0.0489
1,000+$0.0411
3,000+$0.0372
10,000+$0.0311
- +
Ext. Price(USD):$4.89
MOQ:100
Mult:10
SPQ:10,000
Hirose DF20 Series Gold Plated Crimp Terminal, Female Contact, Max 0.08mm²
In Stock261,270
2635+
100+$0.0429
1,000+$0.034
3,000+$0.0295
10,000+$0.0262
- +
Ext. Price(USD):$4.29
MOQ:100
Mult:1
SPQ:10,000
Connector Headers and PCB Receptacles, Crimp, Gold Plated, 24-28 AWG, Press-Fit, 13.9mm L
In Stock14,853
2601+
1+$0.165
10+$0.1267
100+$0.1135
500+$0.1027
1,000+$0.0939
- +
Ext. Price(USD):$0.16
MOQ:1
Mult:1
SPQ:10,000
Hirose Tin-Plated Crimp Terminal, Female Contact, DF62 Series, Max 0.3mm²
In Stock67,248
2639+
10+$0.0324
100+$0.0243
1,000+$0.0194
5,000+$0.0176
10,000+$0.0162
- +
Ext. Price(USD):$0.32
MOQ:10
Mult:10
SPQ:15,000
Contacts Headers & Wire Housings Socket Crimp 200nm Gold 16-18 AWG Wire Mount
In Stock500
2629+
5+$0.3475
50+$0.2777
150+$0.2478
500+$0.2105
3,000+$0.1939
- +
Ext. Price(USD):$1.73
MOQ:5
Mult:1
SPQ:3,000
Contacts Crimp 1μm Tin Plated 22-26 AWG Push-In
In Stock41,632
2621+
10+$0.0408
100+$0.0357
5,000+$0.0204
10,000+$0.019
- +
Ext. Price(USD):$0.40
MOQ:10
Mult:1
SPQ:15,000
Rectangular Connector Contact, Crimp, 200nm Gold Plated, 22 AWG, Push-In, 62mm L
In Stock6,089
2543+
1+$0.1063
10+$0.0851
100+$0.0709
500+$0.0654
1,000+$0.0608
- +
Ext. Price(USD):$0.10
MOQ:1
Mult:1
SPQ:10,000
Latch Lock Plug, Crimp, Wire Mount, Free Hanging, TH
In Stock210
2550+
1+$1.0867
10+$0.8929
49+$0.7899
- +
Ext. Price(USD):$1.08
MOQ:1
Mult:1
SPQ:245
Marked Rectangular Connector Contact, Crimp, 1μm Tin, 22 AWG, Press-Fit
In Stock452,071
2626+
10+$0.0312
100+$0.026
5,000+$0.0202
10,000+$0.0187
- +
Ext. Price(USD):$0.31
MOQ:10
Mult:10
SPQ:10,000
Connector Headers and PCB Receptacles, Crimp, Gold Plated, 14-16 AWG, Press-Fit
In Stock3,711
2628+
1+$0.4119
10+$0.3265
500+$0.225
1,000+$0.2118
- +
Ext. Price(USD):$0.41
MOQ:1
Mult:1
SPQ:2,000
Hirose Electric
Package:-
ECAD Model:
Hirose Tin-Plated Crimp Terminal, Female Contact, DF3 Series, Max 0.2mm²
In Stock361
2417+
1+$0.0446
10+$0.0365
50+$0.0309
100+$0.0287
- +
Ext. Price(USD):$0.04
MOQ:1
Mult:1
SPQ:100
Hirose Tin-Plated Crimp Terminal, Female Contact, DF62 Series, Max 0.05mm²
In Stock15,000
2605+
5+$0.0969
50+$0.0946
150+$0.0931
- +
Ext. Price(USD):$0.48
MOQ:5
Mult:1
SPQ:15,000
Hirose Gold Plated Crimp Terminal, Female Contact, DF50 Series, Max 0.08mm²
In Stock75,436
2548+
10+$0.0439
100+$0.0351
5,000+$0.016
10,000+$0.0146
- +
Ext. Price(USD):$0.43
MOQ:10
Mult:10
SPQ:30,000
Hirose Tin-Plated Crimp Terminal, Female Contact, DF1B Series, Max 0.2mm²
In Stock346
2623+
1+$0.0558
10+$0.0456
100+$0.0418
500+$0.0386
1,000+$0.0358
- +
Ext. Price(USD):$0.05
MOQ:1
Mult:1
SPQ:100
Marked, Rectangular Connector Contact Crimp 1μm Tin 24-28 AWG Press-Fit
In Stock298,731
2634+
20+$0.0309
200+$0.0252
600+$0.0221
2,000+$0.0202
10,000+$0.0177
- +
Ext. Price(USD):$0.61
MOQ:20
Mult:10
SPQ:10,000
25 / PageGoto