Rectangular Connector Contacts

Results:

Rectangular connector contacts include separately ordered pins, sockets and crimp terminals for compatible connector housings. Begin with the manufacturer series and housing part number, then match the cavity, contact gender, wire range, termination, plating and application tooling. Similar appearance or wire size alone does not establish compatibility.

Lock the Housing Series Before Selecting a Contact

The housing determines which contact family and retention geometry can be used. Follow the approved compatibility path instead of selecting a terminal from its shape alone.

Manufacturer series → Housing part number → Cavity and contact size → Pin or socket → Approved contact

Use the housing datasheet or application specification to find the compatible contact part number. The same connector series may use different contacts for conductor size, insulation diameter, plating, sealing or production packaging. If the housing has not been selected, start with Rectangular Connector Housings.

Match Both Ends of the Contact

Each contact must fit the mating interface, lock into the correct housing cavity and accept the intended wire. Record all three interfaces before comparing stock or pricing.

Contact section What must match Fields to verify
Mating end The opposite conductive contact Pin, socket or non-gendered type; contact size and finish
Housing interface The cavity and retention system Series, cavity size, locking lance and insertion direction
Wire end The conductor and insulation AWG or cross-sectional area, conductor type and insulation diameter
Termination area The specified assembly process Crimp, solder, press-fit or other manufacturer-approved method

For a complete PCB header, wire housing and terminal combination, compare the available Wire to Board Connectors and verify every component against the same product series.

Choose the Contact Construction and Packaging

Contact form Selection focus
Stamped and formed Wire and insulation range, open-barrel geometry, reel format and specified crimp die
Machined or solid Contact size, conductor range, electrical load and dedicated tooling
Loose-piece packaging Prototype, service or manual assembly requirements
Reel or strip packaging Applicator compatibility, feed direction, carrier pitch and production quantity

Match the Wire, Finish and Electrical Load

  1. Confirm the complete conductor range in AWG or square millimetres.
  2. Check conductor stranding and the permitted insulation outside diameter.
  3. Compare contact material, tin or gold finish, and any specified plating thickness.
  4. Verify current rating under the stated wire, contact and temperature conditions.
  5. Check operating temperature, mating durability, vibration and environmental exposure.
Contact finish should be evaluated as part of the complete mating pair. Confirm that both sides use finishes approved by the connector manufacturer for the required environment and mating life.

Include Tooling in the Contact Selection

For crimp contacts, identify the manufacturer-specified hand tool or applicator, locator, die set, strip length and crimp-height requirements. Production inspection may also include conductor position, insulation support, bellmouth, pull force and contact deformation.

After termination, insert the contact in the specified direction until its retention feature locks into the housing. Use the approved extraction tool when removal is required. The guide to connector pins, crimping, soldering and IDC provides additional guidance on termination methods and crimp inspection.

Create a Contact Procurement Record

Record the housing series and part number, contact part number, pin or socket type, wire range, insulation diameter, termination, plating, packaging and required tooling. This provides a more reliable basis for replacement and production sourcing than appearance or wire size alone.

If the required interface or connector family has not yet been determined, return to the broader Rectangular Connectors range before selecting individual contacts.

Read More
Rectangular Connector ContactsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Power to the Board Crimp, Tin Plated, 16-18 AWG, Push-In
In Stock11,077
2631+
1+$0.1508
10+$0.1234
100+$0.1131
500+$0.1044
1,000+$0.0969
- +
Ext. Price(USD):$0.15
MOQ:1
Mult:1
SPQ:4,000
Hirose Tin-Plated Crimp Terminal, Female Contact, DF11 Series, Max 0.2mm²
In Stock1,054
2538+
5+$0.0918
50+$0.0732
150+$0.0638
- +
Ext. Price(USD):$0.45
MOQ:5
Mult:1
SPQ:100
Automotive Connectors Contacts Shield Contact Crimp 1μm Tin Wire Mount 7.8mm×8mm×6.66mm
In Stock2,596
2508+
1+$0.4607
10+$0.37
500+$0.2589
1,400+$0.2457
- +
Ext. Price(USD):$0.46
MOQ:1
Mult:1
SPQ:1,400
Connector Headers and PCB Receptacles, Crimp, Gold, 24-28 AWG, Press-In
In Stock83,986
2628+
1+$0.1003
10+$0.0752
100+$0.0602
500+$0.0547
1,000+$0.0501
- +
Ext. Price(USD):$0.10
MOQ:1
Mult:1
SPQ:10,000
Crimp Terminal, 1μm Tin Plated, 28-30 AWG, 1.4mm H
In Stock40,000
2514+
10+$0.0466
100+$0.0399
5,000+$0.0215
10,000+$0.02
- +
Ext. Price(USD):$0.46
MOQ:10
Mult:10
SPQ:40,000
Automotive Connector Contact, Crimp, 1μm Tin Plated, 12-14 AWG Wire Mount, 19.5mm × 5.4mm × 5.6mm
In Stock4,454
2536+
1+$0.4798
10+$0.4535
100+$0.4327
500+$0.4198
1,000+$0.407
- +
Ext. Price(USD):$0.47
MOQ:1
Mult:1
SPQ:1,700
Hirose DF13 Series Tin-Plated Crimp Terminal, Female Contact, Max 0.12mm²
In Stock1,886,916
2609+
50+$0.0217
500+$0.0172
20,000+$0.0119
50,000+$0.0112
- +
Ext. Price(USD):$1.08
MOQ:50
Mult:10
SPQ:10,000
Connector Terminal, Crimp, Gold Plated, 20-22 AWG, Press-In, 9.5mm L × 1.95mm H
In Stock12,169
2604+
5+$0.1125
50+$0.0897
2,500+$0.0632
5,000+$0.0598
- +
Ext. Price(USD):$0.56
MOQ:5
Mult:1
SPQ:10,000
Crimp, 1μm Tin Plated, 20-22 AWG
In Stock13,452
2606+
1+$0.1173
10+$0.0978
100+$0.0889
500+$0.0808
1,000+$0.0735
- +
Ext. Price(USD):$0.11
MOQ:1
Mult:1
SPQ:15,000
Tin-Plated
In Stock19,355
2635+
5+$0.0912
50+$0.0738
2,500+$0.0534
4,000+$0.0508
- +
Ext. Price(USD):$0.45
MOQ:5
Mult:1
SPQ:4,000
Crimp, 1μm Tin Plated, 20-22 AWG
In Stock76,221
2607+
1+$0.0534
10+$0.042
1,000+$0.0295
5,000+$0.0282
- +
Ext. Price(USD):$0.05
MOQ:1
Mult:1
SPQ:15,000
Automotive Connectors, Female Terminals, Crimp, Tin, 20-22 AWG, Push-In, 6.2mm(L) × 1.7mm(H)
In Stock28,646
2432+
10+$0.0448
100+$0.0372
5,000+$0.0284
10,000+$0.0272
- +
Ext. Price(USD):$0.44
MOQ:10
Mult:1
SPQ:10,000
Contacts, Crimp, 1μm Tin Plated, 26-28 AWG, Push-In
In Stock27,302
2608+
1+$0.0506
10+$0.0414
100+$0.038
500+$0.0351
1,000+$0.0326
- +
Ext. Price(USD):$0.05
MOQ:1
Mult:1
SPQ:100
Connector Headers & PCB Receptacles, Crimp, Gold Plated, 10-12 AWG, Press-Fit
In Stock20,290
2501+
1+$0.6869
10+$0.4414
100+$0.3253
500+$0.2875
1,000+$0.2576
- +
Ext. Price(USD):$0.68
MOQ:1
Mult:1
SPQ:2,000
Marked Crimp Terminal Tin Plated 28-30 AWG Press-Fit
In Stock112,654
2629+
20+$0.0314
200+$0.0248
10,000+$0.017
20,000+$0.0159
- +
Ext. Price(USD):$0.62
MOQ:20
Mult:10
SPQ:40,000
Hirose Electric
Package:-
ECAD Model:
Hirose Tin-Plated Crimp Terminal, Female Contact, DF3 Series, Max 0.3mm²
In Stock1,190
2341+
5+$0.1058
50+$0.0847
200+$0.0742
500+$0.0664
2,500+$0.0601
- +
Ext. Price(USD):$0.52
MOQ:5
Mult:1
SPQ:100
Connector Headers and PCB Receptacles Crimp Gold 28-36 AWG Press-In 5.95mm L
In Stock19,977
2413+
20+$0.0433
200+$0.0356
600+$0.0314
2,000+$0.0288
- +
Ext. Price(USD):$0.86
MOQ:20
Mult:10
SPQ:30,000
Connector Headers and PCB Receptacles, Crimp, Tin, 18-22 AWG, Press-Fit
In Stock1,158
2550+
1+$0.0525
10+$0.0446
100+$0.0389
1,000+$0.035
- +
Ext. Price(USD):$0.05
MOQ:1
Mult:1
SPQ:5,000
Crimp, 203nm Gold Plating, 22-26 AWG, Press-Fit
In Stock35,316
2552+
1+$0.2389
10+$0.1593
100+$0.1194
500+$0.1062
1,000+$0.0956
- +
Ext. Price(USD):$0.23
MOQ:1
Mult:1
SPQ:15,000
Crimp, 1μm Tin Plated, 20-22 AWG
In Stock29,171
2552+
10+$0.0388
100+$0.031
5,000+$0.0219
15,000+$0.0207
- +
Ext. Price(USD):$0.38
MOQ:10
Mult:1
SPQ:15,000
Connector Headers and PCB Receptacles, Crimp, Gold Plated, 20-22 AWG, Press-Fit
In Stock31,858
2519+
10+$0.1626
100+$0.1198
1,000+$0.0948
5,000+$0.0859
10,000+$0.0785
- +
Ext. Price(USD):$1.62
MOQ:10
Mult:10
SPQ:10,000
Hirose DF13 Series Receptacle Terminal for DF13 Connector
In Stock1,966
2604+
10+$0.0529
100+$0.0423
5,000+$0.0298
10,000+$0.0282
- +
Ext. Price(USD):$0.52
MOQ:10
Mult:10
SPQ:10,000
Connector Headers & PCB Receptacles, Crimp, Gold Plated, 20-22 AWG, Press-Fit, 11.5mm L × 2.2mm H
In Stock10,340
2606+
1+$0.581
10+$0.5074
100+$0.4698
500+$0.4474
1,000+$0.4261
- +
Ext. Price(USD):$0.58
MOQ:1
Mult:1
SPQ:10,000
Hirose Gold Plated Crimp Terminal Female Contact DF20 Series Max 0.05mm²
In Stock9,678
2447+
1+$0.0506
10+$0.0409
100+$0.0343
500+$0.0317
1,000+$0.0295
- +
Ext. Price(USD):$0.05
MOQ:1
Mult:1
SPQ:10,000
Hirose Tin-Plated Crimp Terminal, Female Contact, DF61 Series, Max 0.3mm²
In Stock89,898
2641+
1+$0.0391
50+$0.0298
5,000+$0.0219
10,000+$0.0202
- +
Ext. Price(USD):$0.03
MOQ:1
Mult:1
SPQ:18,000
25 / PageGoto