Rectangular Connector Contacts

Results:

Rectangular connector contacts include separately ordered pins, sockets and crimp terminals for compatible connector housings. Begin with the manufacturer series and housing part number, then match the cavity, contact gender, wire range, termination, plating and application tooling. Similar appearance or wire size alone does not establish compatibility.

Lock the Housing Series Before Selecting a Contact

The housing determines which contact family and retention geometry can be used. Follow the approved compatibility path instead of selecting a terminal from its shape alone.

Manufacturer series → Housing part number → Cavity and contact size → Pin or socket → Approved contact

Use the housing datasheet or application specification to find the compatible contact part number. The same connector series may use different contacts for conductor size, insulation diameter, plating, sealing or production packaging. If the housing has not been selected, start with Rectangular Connector Housings.

Match Both Ends of the Contact

Each contact must fit the mating interface, lock into the correct housing cavity and accept the intended wire. Record all three interfaces before comparing stock or pricing.

Contact section What must match Fields to verify
Mating end The opposite conductive contact Pin, socket or non-gendered type; contact size and finish
Housing interface The cavity and retention system Series, cavity size, locking lance and insertion direction
Wire end The conductor and insulation AWG or cross-sectional area, conductor type and insulation diameter
Termination area The specified assembly process Crimp, solder, press-fit or other manufacturer-approved method

For a complete PCB header, wire housing and terminal combination, compare the available Wire to Board Connectors and verify every component against the same product series.

Choose the Contact Construction and Packaging

Contact form Selection focus
Stamped and formed Wire and insulation range, open-barrel geometry, reel format and specified crimp die
Machined or solid Contact size, conductor range, electrical load and dedicated tooling
Loose-piece packaging Prototype, service or manual assembly requirements
Reel or strip packaging Applicator compatibility, feed direction, carrier pitch and production quantity

Match the Wire, Finish and Electrical Load

  1. Confirm the complete conductor range in AWG or square millimetres.
  2. Check conductor stranding and the permitted insulation outside diameter.
  3. Compare contact material, tin or gold finish, and any specified plating thickness.
  4. Verify current rating under the stated wire, contact and temperature conditions.
  5. Check operating temperature, mating durability, vibration and environmental exposure.
Contact finish should be evaluated as part of the complete mating pair. Confirm that both sides use finishes approved by the connector manufacturer for the required environment and mating life.

Include Tooling in the Contact Selection

For crimp contacts, identify the manufacturer-specified hand tool or applicator, locator, die set, strip length and crimp-height requirements. Production inspection may also include conductor position, insulation support, bellmouth, pull force and contact deformation.

After termination, insert the contact in the specified direction until its retention feature locks into the housing. Use the approved extraction tool when removal is required. The guide to connector pins, crimping, soldering and IDC provides additional guidance on termination methods and crimp inspection.

Create a Contact Procurement Record

Record the housing series and part number, contact part number, pin or socket type, wire range, insulation diameter, termination, plating, packaging and required tooling. This provides a more reliable basis for replacement and production sourcing than appearance or wire size alone.

If the required interface or connector family has not yet been determined, return to the broader Rectangular Connectors range before selecting individual contacts.

Read More
Rectangular Connector ContactsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Crimp Tin 16-18 AWG
Available Stock
20,620
Estimated Ship Time:6-13 working days
25+$0.1656
100+$0.1576
5,000+$0.1199
10,000+$0.1156
- +
Ext. Price(USD):$14.07
MOQ:85
Mult:1
SPQ:1
Connector Headers and PCB Receptacles, Crimp, Gold Plated, 20-22 AWG, Press-Fit
Available Stock
12,757
Estimated Ship Time:6-13 working days
25+$0.2404
100+$0.2277
5,000+$0.1696
10,000+$0.162
- +
Ext. Price(USD):$14.18
MOQ:59
Mult:1
SPQ:1
Connector Headers & PCB Receptacles, Crimp, 203nm Gold, 24-28 AWG, Press-Fit
Available Stock
3,625
Estimated Ship Time:6-13 working days
10+$0.7326
25+$0.6544
5,000+$0.4504
10,000+$0.4406
- +
Ext. Price(USD):$14.65
MOQ:20
Mult:1
SPQ:1
Crimp Tin 20-22 AWG
Available Stock
1,020
Estimated Ship Time:6-13 working days
25+$0.4508
100+$0.3806
5,000+$0.243
10,000+$0.2311
- +
Ext. Price(USD):$14.42
MOQ:32
Mult:1
SPQ:1
Power to the Board Crimp, 203nm Gold, 10-12 AWG, Press-In
Available Stock
5,530
Estimated Ship Time:6-13 working days
1+$2.3805
10+$2.024
1,000+$1.3716
2,500+$1.3176
- +
Ext. Price(USD):$14.28
MOQ:6
Mult:1
SPQ:1
Hirose DF1 Series Receptacle Connector
Available Stock
8,693
Estimated Ship Time:6-13 working days
25+$0.498
100+$0.396
2,500+$0.338
5,000+$0.3262
- +
Ext. Price(USD):$14.44
MOQ:29
Mult:1
SPQ:1
Heavy Duty Power Connector, Gold Plated, 14 AWG, 15 AWG, 15 AWG to 14 AWG
Available Stock
310
Estimated Ship Time:6-13 working days
1+$1.794
10+$1.564
2,500+$0.9353
5,000+$0.9223
- +
Ext. Price(USD):$14.35
MOQ:8
Mult:1
SPQ:1
Heavy Duty Power Connectors Crimp 200nm Gold 16-18 AWG Press-In
Available Stock
2,753
Estimated Ship Time:6-13 working days
1+$1.7135
10+$1.4605
3,500+$0.8813
7,000+$0.8575
- +
Ext. Price(USD):$15.42
MOQ:9
Mult:1
SPQ:1
Hirose Tin-Plated Crimp Terminal, Female Contact, DF62W Series, Max 0.5mm²
Available Stock
600
Estimated Ship Time:5-10 working days
100+$0.1563
200+$0.1514
500+$0.1471
1,000+$0.1434
2,500+$0.1417
- +
Ext. Price(USD):$15.63
MOQ:100
Mult:100
Marked Rectangular Connector Contact, Crimp, 1μm Tin, 22 AWG, Press-Fit
Available Stock
74,278
Estimated Ship Time:6-13 working days
100+$0.1323
300+$0.1133
5,000+$0.094
10,000+$0.0896
- +
Ext. Price(USD):$14.02
MOQ:106
Mult:1
SPQ:1
Hirose Heavy Duty Power Connector Contact, PQ50 Series, Crimp Contact, Plug, 24.35mm × 3mm × 3.65mm
Available Stock
290
Estimated Ship Time:6-13 working days
1+$2.323
10+$2.024
2,500+$1.188
5,000+$1.1664
- +
Ext. Price(USD):$16.26
MOQ:7
Mult:1
SPQ:1
Connector Headers and PCB Receptacles, Crimp, Tin, 18-22 AWG, Press-Fit
Available Stock
7,212
Estimated Ship Time:6-13 working days
25+$0.1909
100+$0.1806
2,500+$0.1404
10,000+$0.121
- +
Ext. Price(USD):$14.12
MOQ:74
Mult:1
SPQ:1
Contacts, Crimp, Gold Plated, 26-30 AWG, Press-Fit
Available Stock
5,739
Estimated Ship Time:9-14 working days
50+$0.3644
100+$0.347
1,000+$0.2948
2,500+$0.2764
- +
Ext. Price(USD):$26.23
MOQ:72
Mult:1
SPQ:1
Connector Headers and PCB Receptacles, Crimp, Gold Plated, 30-32 AWG, Push-In
Available Stock
18,330
Estimated Ship Time:9-14 working days
250+$0.0713
500+$0.0679
1,000+$0.0647
2,500+$0.0606
- +
Ext. Price(USD):$26.02
MOQ:365
Mult:1
SPQ:1
Available Stock
12,888
Estimated Ship Time:6-13 working days
25+$0.1656
100+$0.1576
1,000+$0.1296
2,500+$0.122
10,000+$0.1112
- +
Ext. Price(USD):$14.07
MOQ:85
Mult:1
SPQ:1
Connector Headers and PCB Receptacles Crimp Tin 20-22 AWG Press-Fit 16.3mm L
Available Stock
530
Estimated Ship Time:9-14 working days
100+$0.1923
300+$0.178
500+$0.1717
1,000+$0.1635
2,500+$0.1532
- +
Ext. Price(USD):$26.15
MOQ:136
Mult:1
SPQ:1
Connector Headers and PCB Receptacles Crimp Gold Plated 26-30 AWG Press-In
Available Stock
12,683
Estimated Ship Time:6-13 working days
25+$0.3117
100+$0.2838
2,500+$0.2052
10,000+$0.1652
- +
Ext. Price(USD):$14.02
MOQ:45
Mult:1
SPQ:1
Connector Headers and PCB Receptacles, Crimp, 203nm, Gold, 8 AWG, Press-Fit
Available Stock
3,071
Estimated Ship Time:9-14 working days
10+$2.0812
25+$1.9509
1,000+$1.5037
2,500+$1.4096
- +
Ext. Price(USD):$27.05
MOQ:13
Mult:1
SPQ:1
Heavy Duty Power Connector, Crimp, Gold Plated, 14-15 AWG, Press-Fit
Available Stock
400
Estimated Ship Time:6-13 working days
1+$2.07
10+$1.8055
2,500+$1.0552
5,000+$1.0433
- +
Ext. Price(USD):$14.49
MOQ:7
Mult:1
SPQ:1
Automotive Connectors, Crimp, Push-In
Available Stock
1,500
Estimated Ship Time:9-14 working days
25+$0.9871
50+$0.94
100+$0.8951
250+$0.839
500+$0.7989
- +
Ext. Price(USD):$26.65
MOQ:27
Mult:1
SPQ:1
Marked, Rectangular Connector Contact Crimp 1μm Tin 24-28 AWG Press-Fit
Available Stock
12,105
Estimated Ship Time:6-13 working days
100+$0.1323
300+$0.1133
5,000+$0.094
10,000+$0.0896
- +
Ext. Price(USD):$14.02
MOQ:106
Mult:1
SPQ:1
Available Stock
6,400
Estimated Ship Time:6-13 working days
100+$0.1334
250+$0.1144
1,000+$0.1067
2,500+$0.0983
5,000+$0.095
- +
Ext. Price(USD):$14.00
MOQ:105
Mult:1
SPQ:1
Connector Headers and PCB Receptacles, Crimp, Tin-Plated, 22-26 AWG, Push-In
Available Stock
10,096
Estimated Ship Time:6-13 working days
25+$0.1909
100+$0.1817
5,000+$0.1339
10,000+$0.122
- +
Ext. Price(USD):$14.12
MOQ:74
Mult:1
SPQ:1
Automotive Connectors, Female Terminals, Crimp, Tin-Plated, 20-22 AWG, Push-In
Available Stock
784
Estimated Ship Time:6-13 working days
10+$1.219
25+$1.0868
2,500+$0.7636
5,000+$0.7538
- +
Ext. Price(USD):$14.62
MOQ:12
Mult:1
SPQ:1
Rectangular Connector Contact, Crimp, 200nm Gold Plated, 30 AWG, Push-In
Available Stock
2
Estimated Ship Time:9-14 working days
100+$0.148
250+$0.1386
500+$0.132
1,000+$0.1257
2,500+$0.1178
- +
Ext. Price(USD):$26.04
MOQ:176
Mult:1
SPQ:1
25 / PageGoto