Rectangular Connector Contacts

Results:

Rectangular connector contacts include separately ordered pins, sockets and crimp terminals for compatible connector housings. Begin with the manufacturer series and housing part number, then match the cavity, contact gender, wire range, termination, plating and application tooling. Similar appearance or wire size alone does not establish compatibility.

Lock the Housing Series Before Selecting a Contact

The housing determines which contact family and retention geometry can be used. Follow the approved compatibility path instead of selecting a terminal from its shape alone.

Manufacturer series → Housing part number → Cavity and contact size → Pin or socket → Approved contact

Use the housing datasheet or application specification to find the compatible contact part number. The same connector series may use different contacts for conductor size, insulation diameter, plating, sealing or production packaging. If the housing has not been selected, start with Rectangular Connector Housings.

Match Both Ends of the Contact

Each contact must fit the mating interface, lock into the correct housing cavity and accept the intended wire. Record all three interfaces before comparing stock or pricing.

Contact section What must match Fields to verify
Mating end The opposite conductive contact Pin, socket or non-gendered type; contact size and finish
Housing interface The cavity and retention system Series, cavity size, locking lance and insertion direction
Wire end The conductor and insulation AWG or cross-sectional area, conductor type and insulation diameter
Termination area The specified assembly process Crimp, solder, press-fit or other manufacturer-approved method

For a complete PCB header, wire housing and terminal combination, compare the available Wire to Board Connectors and verify every component against the same product series.

Choose the Contact Construction and Packaging

Contact form Selection focus
Stamped and formed Wire and insulation range, open-barrel geometry, reel format and specified crimp die
Machined or solid Contact size, conductor range, electrical load and dedicated tooling
Loose-piece packaging Prototype, service or manual assembly requirements
Reel or strip packaging Applicator compatibility, feed direction, carrier pitch and production quantity

Match the Wire, Finish and Electrical Load

  1. Confirm the complete conductor range in AWG or square millimetres.
  2. Check conductor stranding and the permitted insulation outside diameter.
  3. Compare contact material, tin or gold finish, and any specified plating thickness.
  4. Verify current rating under the stated wire, contact and temperature conditions.
  5. Check operating temperature, mating durability, vibration and environmental exposure.
Contact finish should be evaluated as part of the complete mating pair. Confirm that both sides use finishes approved by the connector manufacturer for the required environment and mating life.

Include Tooling in the Contact Selection

For crimp contacts, identify the manufacturer-specified hand tool or applicator, locator, die set, strip length and crimp-height requirements. Production inspection may also include conductor position, insulation support, bellmouth, pull force and contact deformation.

After termination, insert the contact in the specified direction until its retention feature locks into the housing. Use the approved extraction tool when removal is required. The guide to connector pins, crimping, soldering and IDC provides additional guidance on termination methods and crimp inspection.

Create a Contact Procurement Record

Record the housing series and part number, contact part number, pin or socket type, wire range, insulation diameter, termination, plating, packaging and required tooling. This provides a more reliable basis for replacement and production sourcing than appearance or wire size alone.

If the required interface or connector family has not yet been determined, return to the broader Rectangular Connectors range before selecting individual contacts.

Read More
Rectangular Connector ContactsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Hirose Gold Plated Crimp Terminal, Male Contact, DF62 Series, Max 0.2mm²
In Stock11
2629+
1+$0.1914
10+$0.1566
100+$0.1435
500+$0.1325
1,000+$0.123
- +
Ext. Price(USD):$0.19
MOQ:1
Mult:1
SPQ:100
Hirose Tin-Plated Crimp Terminal, Male Contact, DF62 Series, Max 0.3mm²
In Stock2,049
2624+
20+$0.0368
200+$0.0289
600+$0.0245
2,000+$0.022
15,000+$0.0197
- +
Ext. Price(USD):$0.73
MOQ:20
Mult:1
SPQ:15,000
Hirose DF57 Tin-Plated Crimp Terminal, Female Contact, Max 0.03mm²
In Stock39,350
2524+
1+$0.0241
200+$0.0214
500+$0.0185
1,000+$0.0172
- +
Ext. Price(USD):$0.02
MOQ:1
Mult:1
SPQ:10
Connector Headers and PCB Receptacles, Crimp, Gold, 24-28 AWG, Press-In
In Stock1,248
2620+
5+$0.1348
50+$0.1076
150+$0.0941
- +
Ext. Price(USD):$0.67
MOQ:5
Mult:1
SPQ:100
Connector Headers and PCB Receptacles, Crimp, Tin Plated, 24-28 AWG, Push-In, 9.6mm L
In Stock942
2617+
20+$0.0288
200+$0.0225
600+$0.0189
2,000+$0.0168
10,000+$0.0139
- +
Ext. Price(USD):$0.57
MOQ:20
Mult:10
SPQ:10,000
Connector Headers PCB Receptacles Crimp Gold 203nm 30 AWG Press-In
In Stock36,999
2602+
1+$0.2052
10+$0.1172
100+$0.0966
500+$0.0821
1,000+$0.0714
- +
Ext. Price(USD):$0.20
MOQ:1
Mult:1
SPQ:15,000
Rectangular Connector Contact Crimp 200nm Gold 24-28 AWG Press-Fit
In Stock4,439
2637+
5+$0.0882
50+$0.07
2,500+$0.0492
5,000+$0.0466
- +
Ext. Price(USD):$0.44
MOQ:5
Mult:1
SPQ:10,000
Crimp Terminal, 1μm Tin Plated, 24-28 AWG, Push-In
In Stock65,465
2616+
20+$0.0407
200+$0.0329
15,000+$0.0238
30,000+$0.0226
- +
Ext. Price(USD):$0.81
MOQ:20
Mult:10
SPQ:15,000
Connector Headers and PCB Receptacles, Crimp, Tin, 30-32 AWG, Press-Fit, 4.9mm L
In Stock9,598
2621+
10+$0.038
100+$0.0326
5,000+$0.0175
10,000+$0.0163
- +
Ext. Price(USD):$0.38
MOQ:10
Mult:10
SPQ:10,000
Crimp, 203nm Gold Plating, 22-26 AWG, Press-Fit
In Stock21,131
2605+
1+$0.1767
10+$0.1356
100+$0.11
500+$0.1005
1,000+$0.0925
- +
Ext. Price(USD):$0.17
MOQ:1
Mult:1
SPQ:15,000
FFC-FPC Connector, Crimp, Gold Plated, 30-32 AWG, Press-Fit
In Stock14,890
2528+
1+$0.0636
10+$0.0495
100+$0.0445
500+$0.0405
1,000+$0.0371
- +
Ext. Price(USD):$0.06
MOQ:1
Mult:1
SPQ:10,000
Hirose Tin-Plated Crimp Terminal, Female Contact, DF11 Series, Max 0.3mm²
In Stock153
2550+
1+$0.0824
10+$0.0674
100+$0.057
500+$0.053
1,000+$0.0494
- +
Ext. Price(USD):$0.08
MOQ:1
Mult:1
SPQ:100
Connector Headers and PCB Receptacles Crimp Tin 20-22 AWG Press-Fit 13.9mm L
In Stock32,596
2613+
1+$0.0444
10+$0.0355
100+$0.0296
500+$0.0273
1,000+$0.0254
- +
Ext. Price(USD):$0.04
MOQ:1
Mult:1
SPQ:10,000
Power to the Board Crimp Terminal Tin Plated 20-22 AWG
In Stock1,220
2630+
1+$0.1519
10+$0.1243
100+$0.1139
500+$0.1052
1,000+$0.0976
- +
Ext. Price(USD):$0.15
MOQ:1
Mult:1
SPQ:4,000
Hirose Gold Plated Crimp Terminal, Female Contact, HIF3B Series, Max 0.3mm²
In Stock586
2619+
1+$0.4192
10+$0.343
100+$0.3144
500+$0.2902
1,000+$0.2695
- +
Ext. Price(USD):$0.41
MOQ:1
Mult:1
SPQ:100
Connector Header, PCB Receptacle, Crimp, 203nm, Gold, 8 AWG, Press-Fit, 27.2mm L × 7.4mm H
In Stock529
2616+
1+$1.4744
10+$1.18
100+$1.0724
500+$0.9833
1,000+$0.9075
- +
Ext. Price(USD):$1.47
MOQ:1
Mult:1
SPQ:700
Hirose DF52 Series FPC Connector, Plug, 0.8mm Pitch, Cable Mount, Crimp
In Stock1,900,296
2622+
100+$0.0178
1,000+$0.0143
40,000+$0.0085
80,000+$0.008
- +
Ext. Price(USD):$1.78
MOQ:100
Mult:10
SPQ:40,000
Connector Headers and PCB Receptacles, Crimp, Tin-Plated, 20-22 AWG, Press-Fit, 9.5mm L × 1.95mm H
In Stock75,693
2628+
20+$0.0413
200+$0.0338
10,000+$0.0242
20,000+$0.0231
- +
Ext. Price(USD):$0.82
MOQ:20
Mult:10
SPQ:10,000
Power to the Board Crimp, Tin Plated, 16-18 AWG, Push-In
In Stock6,590
2635+
1+$0.157
10+$0.1177
100+$0.0942
500+$0.0856
1,000+$0.0785
- +
Ext. Price(USD):$0.15
MOQ:1
Mult:1
SPQ:4,000
Hirose Tin-Plated Crimp Terminal, Female Contact, DF3 Series, Max 0.2mm²
In Stock213,744
2635+
10+$0.0405
100+$0.0304
5,000+$0.0122
10,000+$0.011
- +
Ext. Price(USD):$0.40
MOQ:10
Mult:10
SPQ:10,000
Hirose Gold Plated Crimp Terminal, Female Contact, DF14 Series, Max 0.05mm²
In Stock4,612
2613+
1+$0.0449
10+$0.0367
1,000+$0.0288
5,000+$0.0269
- +
Ext. Price(USD):$0.04
MOQ:1
Mult:1
SPQ:10,000
Connector Headers PCB Receptacles Crimp Gold 203nm 30 AWG Press-In
In Stock70
2518+
5+$0.0988
50+$0.0796
2,500+$0.0571
5,000+$0.0543
- +
Ext. Price(USD):$0.49
MOQ:5
Mult:1
SPQ:15,000
Connector Headers and PCB Receptacles, Crimp, 203nm, Gold, 14-16 AWG, Press-Fit
In Stock2,212
2616+
1+$1.3721
10+$1.0209
100+$0.8129
500+$0.7378
1,000+$0.6754
- +
Ext. Price(USD):$1.37
MOQ:1
Mult:1
SPQ:2,500
FFC-FPC Connector Crimp Gold 28-30 AWG Press-In
In Stock2,239
2605+
1+$0.0547
10+$0.0447
100+$0.041
500+$0.0379
1,000+$0.0351
- +
Ext. Price(USD):$0.05
MOQ:1
Mult:1
SPQ:10,000
Hirose Tin-Plated Crimp Terminal, Female Contact, DF1B Series, Max 0.5mm²
In Stock1,582
2640+
1+$0.0576
10+$0.0471
100+$0.0432
500+$0.0398
1,000+$0.037
- +
Ext. Price(USD):$0.05
MOQ:1
Mult:1
SPQ:100
25 / PageGoto