Power sleeve connectors provide a detachable DC supply connection through a barrel plug and matching jack. Their concentric contact geometry, mounting style and optional switch contacts define different product forms.
A concentric connection for DC power
In this barrel-connector category, the electrical interface is formed by inner and outer conductors rather than a row of separate pins. A cable plug connects an external supply lead to a compatible equipment jack. These parts serve the power inlet; they do not regulate the supply voltage or establish its polarity.
- Inner connection
- The mating pin and inner sleeve must have the corresponding dimensions. A shared outside barrel diameter alone does not establish a suitable contact fit.
- Outer barrel and engagement
- The outer diameter and engagement length describe different aspects of the interface. Panel depth can also affect how far a plug reaches into the jack.
From the cable to the enclosure or board
Cable-mounted plugs terminate the supply lead. Panel-mounted jacks attach to the enclosure, while PCB jacks connect directly to the circuit board. Horizontal and vertical PCB orientations accommodate different insertion directions; surface-mount and through-hole terminations describe the board attachment rather than the mating barrel.
Current rating, voltage rating and connection polarity remain separate product or circuit requirements. Center-positive wiring is not guaranteed merely because a plug fits. Corresponding caps or mounting hardware belong with Sleeve Connector Accessories, rather than changing the electrical role of the power connector.
What an extra jack terminal does
Some jacks include a switched contact that changes state when a plug is inserted. In a suitable circuit, this can provide insertion detection or source switching. That terminal is not simply another supply pole: the manufacturer's schematic identifies its relationship to the barrel contacts.