Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
CamdenBoss
ECAD Model:
PCB Mount Male Horizontal Connector, Closed End
Available Stock
316
Estimated Ship Time:6-12 working days
100+$0.2184
500+$0.2038
1,000+$0.2002
2,500+$0.2002
5,000+$0.2002
- +
Ext. Price(USD):$24.02
MOQ:110
Mult:10
Conn Shrouded Header (4 Sides) M 3 POS 3.5mm Solder RA Side Entry Thru-Hole
Available Stock
253
Estimated Ship Time:6-12 working days
100+$0.233
500+$0.233
1,000+$0.2288
2,500+$0.2288
5,000+$0.2288
- +
Ext. Price(USD):$25.63
MOQ:110
Mult:10
CamdenBoss
ECAD Model:
Wire to Board HDR 4 POS 3.81mm Solder ST Top Entry TH
Available Stock
388
Estimated Ship Time:6-12 working days
10+$1.1424
100+$1.0472
500+$1.0472
1,000+$1.0282
2,500+$1.0282
- +
Ext. Price(USD):$25.13
MOQ:22
Mult:1
CamdenBoss
ECAD Model:
Shrouded Header Connector, 2 Pos, 7.5mm Pitch, Solder, ST, Top Entry, TH
Available Stock
313
Estimated Ship Time:6-12 working days
10+$0.4863
100+$0.4357
2,500+$0.4201
5,000+$0.4201
- +
Ext. Price(USD):$24.31
MOQ:50
Mult:10
Conn Shrouded Header (4 Sides) M 3 POS 3.5mm Solder ST Top Entry TH
Available Stock
842
Estimated Ship Time:6-12 working days
10+$0.2925
100+$0.2621
2,500+$0.2574
5,000+$0.2574
- +
Ext. Price(USD):$26.32
MOQ:90
Mult:10
Conn Shrouded Header (4 Sides) M 3 POS 5.08mm Solder RA Side Entry Thru-Hole
Available Stock
620
Estimated Ship Time:6-12 working days
100+$0.233
500+$0.233
1,000+$0.2288
2,500+$0.2288
5,000+$0.2288
- +
Ext. Price(USD):$25.63
MOQ:110
Mult:10
CamdenBoss
ECAD Model:
HEADER, SIDE-ENTRY, 8WAY, 5.08MM; Pitch Spacing:5.08mm; No. of Positions:8Ways; Wire Size (AWG):-; Conductor Area CSA:-; Wire Connection Method:-; Rated Current:12A; Rated Voltage:320V; Product Range:CTB9358/A Series; SV
Available Stock
33
Estimated Ship Time:6-12 working days
10+$1.7472
100+$1.716
250+$1.716
500+$1.6848
1,000+$1.6848
- +
Ext. Price(USD):$24.46
MOQ:14
Mult:1
CamdenBoss
ECAD Model:
Wire-to-Board Connector HDR 2 Pos 3.81mm Solder RA Side Entry TH
Available Stock
230
Estimated Ship Time:6-12 working days
10+$0.745
100+$0.6675
1,000+$0.6437
2,500+$0.6437
- +
Ext. Price(USD):$29.80
MOQ:40
Mult:10
Conn Shrouded Header (4 Sides) M 2 POS 3.5mm Solder RA Side Entry Thru-Hole
Available Stock
717
Estimated Ship Time:6-12 working days
100+$0.2016
500+$0.1882
1,000+$0.1882
- +
Ext. Price(USD):$24.19
MOQ:120
Mult:10
CamdenBoss
ECAD Model:
Wire to Board Connector HDR 2 Pos 3.81mm Solder ST Top Entry Thru-Hole
Available Stock
304
Estimated Ship Time:6-12 working days
10+$0.5513
100+$0.4939
2,500+$0.4763
5,000+$0.4763
- +
Ext. Price(USD):$27.56
MOQ:50
Mult:10
Shrouded Header (4 Sides) HDR 12 Pos 5mm Solder RA Side Entry TH
Available Stock
38
Estimated Ship Time:6-12 working days
1+$2.875
10+$2.576
500+$2.484
1,000+$2.484
- +
Ext. Price(USD):$25.87
MOQ:9
Mult:1
CamdenBoss
ECAD Model:
Conn Shrouded Header HDR 3 POS 7.5mm Solder RA Thru-Hole
Available Stock
146
Estimated Ship Time:6-12 working days
10+$1.0752
100+$0.9856
500+$0.9856
- +
Ext. Price(USD):$24.72
MOQ:23
Mult:1
5.08mm Pitch Vertical Male Header Closed Ends 9-Pin
Available Stock
433
Estimated Ship Time:6-12 working days
10+$0.745
100+$0.6675
1,000+$0.6437
2,500+$0.6437
- +
Ext. Price(USD):$29.80
MOQ:40
Mult:10
Conn Shrouded Header (4 Sides) HDR 3 POS 5mm Solder RA Thru-Hole
Available Stock
2,516
Estimated Ship Time:6-12 working days
10+$0.7788
50+$0.7476
500+$0.6853
1,500+$0.6853
- +
Ext. Price(USD):$31.15
MOQ:40
Mult:10
Header, 5.08mm Pitch, Horizontal, Male, Closed Ends, 5 Pos
Available Stock
205
Estimated Ship Time:6-12 working days
10+$0.4563
100+$0.4088
2,500+$0.3942
5,000+$0.3942
- +
Ext. Price(USD):$27.37
MOQ:60
Mult:10
Conn Shrouded Header (4 Sides) M 2 POS 5mm Solder RA Side Entry Thru-Hole
Available Stock
608
Estimated Ship Time:6-12 working days
100+$0.21
500+$0.196
1,000+$0.196
- +
Ext. Price(USD):$25.20
MOQ:120
Mult:10
3.5mm PCB Male T-Block Vert (Closed Ends) 10 Pole
Available Stock
378
Estimated Ship Time:6-12 working days
10+$0.9444
100+$0.8657
500+$0.8657
1,000+$0.85
2,500+$0.85
- +
Ext. Price(USD):$24.55
MOQ:26
Mult:1
PCB Header 3.5mm Male T/BLOCK VERT(CLOSED ENDS) 4-Pole
Available Stock
785
Estimated Ship Time:6-12 working days
10+$0.3588
100+$0.3214
2,500+$0.31
5,000+$0.31
- +
Ext. Price(USD):$25.11
MOQ:70
Mult:10
CamdenBoss
ECAD Model:
Shrouded Header, 2 Pos, 7.5mm Pitch, Solder RA, Thru-Hole
Available Stock
667
Estimated Ship Time:6-12 working days
10+$0.6138
100+$0.5499
1,000+$0.5303
2,500+$0.5303
- +
Ext. Price(USD):$24.55
MOQ:40
Mult:10
CamdenBoss
ECAD Model:
PCB Mount Male Horizontal Closed Ended
Available Stock
403
Estimated Ship Time:6-12 working days
100+$0.2016
500+$0.1882
1,000+$0.1882
- +
Ext. Price(USD):$24.19
MOQ:120
Mult:10
3.81mm Male Closed Horizontal Header 3-Way
Available Stock
290
Estimated Ship Time:6-12 working days
100+$0.2184
500+$0.2038
1,000+$0.2002
2,500+$0.2002
5,000+$0.2002
- +
Ext. Price(USD):$24.02
MOQ:110
Mult:10
3.5mm PCB Male Terminal Block Vertical (Closed Ends) 6-Pole
Available Stock
45
Estimated Ship Time:6-12 working days
10+$0.6744
100+$0.5962
1,000+$0.4885
2,500+$0.4679
- +
Ext. Price(USD):$26.97
MOQ:40
Mult:10
CamdenBoss
ECAD Model:
Shrouded Header (4 Sides) HDR 2 POS 5.08mm Solder RA Thru-Hole
Available Stock
44
Estimated Ship Time:6-12 working days
10+$0.4863
100+$0.4357
2,500+$0.4201
5,000+$0.4201
- +
Ext. Price(USD):$24.31
MOQ:50
Mult:10
25 / PageGoto