Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
CamdenBoss
ECAD Model:
Shrouded Header (4 Sides) HDR 9 POS 5.08mm Solder RA Side Entry Thru-Hole
In Stock55
2201+
1+$6.1473
10+$5.2691
30+$4.6105
100+$3.8825
500+$3.6884
- +
Ext. Price(USD):$6.14
MOQ:1
Mult:1
SPQ:1
3.81mm PCB Male Terminal Block, Horizontal, Closed Ends, 4-Pole
Available Stock
291
Estimated Ship Time:6-12 working days
10+$0.3938
100+$0.3528
2,500+$0.3402
5,000+$0.3402
- +
Ext. Price(USD):$27.56
MOQ:70
Mult:10
Conn Shrouded Header (2 Sides) M 3 POS 5mm Solder RA Side Entry Thru-Hole
Available Stock
168
Estimated Ship Time:6-12 working days
100+$0.2206
500+$0.2206
1,000+$0.2167
2,500+$0.2167
5,000+$0.2167
- +
Ext. Price(USD):$24.26
MOQ:110
Mult:10
5.08mm Pitch Vertical Male Header Closed Ends 6-Pole
Available Stock
330
Estimated Ship Time:6-12 working days
10+$0.4563
100+$0.4088
2,500+$0.3942
5,000+$0.3942
- +
Ext. Price(USD):$27.37
MOQ:60
Mult:10
CamdenBoss
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 4 POS 5.08mm Solder ST Top Entry Thru-Hole
Available Stock
120
Estimated Ship Time:6-12 working days
10+$0.6475
100+$0.5802
1,000+$0.5594
2,500+$0.5594
- +
Ext. Price(USD):$25.90
MOQ:40
Mult:10
Conn Shrouded Header (4 Sides) M 3 POS 7.62mm Solder RA Side Entry Thru-Hole
Available Stock
530
Estimated Ship Time:6-12 working days
10+$0.33
100+$0.2957
2,500+$0.2851
5,000+$0.2851
- +
Ext. Price(USD):$26.40
MOQ:80
Mult:10
3.81mm Male Closed Horizontal Wire-to-Board Header
Available Stock
347
Estimated Ship Time:6-12 working days
100+$0.2184
500+$0.2038
1,000+$0.2002
2,500+$0.2002
5,000+$0.2002
- +
Ext. Price(USD):$24.02
MOQ:110
Mult:10
Conn Shrouded Header (4 Sides) M 3 POS 5mm Solder RA Side Entry Thru-Hole
Available Stock
198
Estimated Ship Time:6-12 working days
100+$0.233
500+$0.233
1,000+$0.2288
2,500+$0.2288
5,000+$0.2288
- +
Ext. Price(USD):$25.63
MOQ:110
Mult:10
CamdenBoss
ECAD Model:
Shrouded Header (4 Sides) HDR 8 Pos 5.08mm Solder ST Thru-Hole
Available Stock
105
Estimated Ship Time:6-12 working days
10+$1.1872
100+$1.166
500+$1.166
1,000+$1.1448
2,500+$1.1448
- +
Ext. Price(USD):$24.93
MOQ:21
Mult:1
Conn Shrouded Header (2 Sides) HDR 3 POS 5mm Solder RA Side Entry Thru-Hole
Available Stock
67
Estimated Ship Time:6-12 working days
10+$0.7788
50+$0.7476
500+$0.6853
1,500+$0.6853
- +
Ext. Price(USD):$31.15
MOQ:40
Mult:10
CamdenBoss
ECAD Model:
Wire-to-Board Connector HDR, 8 Pos, 3.81mm Pitch, Solder, RA Side Entry, Thru-Hole
Available Stock
72
Estimated Ship Time:6-12 working days
1+$2.725
10+$2.4416
500+$2.3544
1,000+$2.3544
- +
Ext. Price(USD):$24.52
MOQ:9
Mult:1
Conn Shrouded Header (4 Sides) M 2 POS 3.81mm Solder ST Top Entry Thru-Hole
Available Stock
1,526
Estimated Ship Time:6-12 working days
100+$0.21
500+$0.196
1,000+$0.196
- +
Ext. Price(USD):$25.20
MOQ:120
Mult:10
CamdenBoss
ECAD Model:
Shrouded Header (4 Sides), HDR, 3-Pos, 7.5mm Pitch, Solder, ST, Thru-Hole
Available Stock
1,063
Estimated Ship Time:6-12 working days
10+$0.745
100+$0.6675
1,000+$0.6437
2,500+$0.6437
- +
Ext. Price(USD):$29.80
MOQ:40
Mult:10
Shrouded Header (4 Sides) M 3 POS 3.81mm Solder RA Side Entry Thru-Hole
Available Stock
132
Estimated Ship Time:6-12 working days
10+$0.2925
100+$0.2621
2,500+$0.2574
5,000+$0.2574
- +
Ext. Price(USD):$26.32
MOQ:90
Mult:10
Conn Shrouded Header (4 Sides) HDR 8 POS 5mm Solder ST Top Entry Thru-Hole
Available Stock
138
Estimated Ship Time:6-12 working days
10+$1.1872
100+$1.166
500+$1.166
1,000+$1.1448
2,500+$1.1448
- +
Ext. Price(USD):$24.93
MOQ:21
Mult:1
CamdenBoss
ECAD Model:
Wire-to-Board Connector Header 3 Pos 3.81mm Solder Straight Top Entry Thru-Hole
Available Stock
165
Estimated Ship Time:6-12 working days
10+$1.086
100+$0.9955
500+$0.9955
- +
Ext. Price(USD):$24.97
MOQ:23
Mult:1
Wire-to-Board Connector, F, 2 Pos, 5.08mm Pitch, Solder, RA Side Entry, TH
Available Stock
219
Estimated Ship Time:6-12 working days
10+$0.4863
100+$0.4357
2,500+$0.4201
5,000+$0.4201
- +
Ext. Price(USD):$24.31
MOQ:50
Mult:10
CamdenBoss
ECAD Model:
Wire to Board Connector HDR 6-Pos 3.81mm Solder Straight Top Entry Thru-Hole
Available Stock
87
Estimated Ship Time:6-12 working days
10+$1.5344
100+$1.507
500+$1.4796
1,000+$1.4796
2,500+$1.4796
- +
Ext. Price(USD):$24.55
MOQ:16
Mult:1
Conn Shrouded Header (4 Sides) HDR 12 POS 5mm Solder ST Top Entry Thru-Hole
Available Stock
146
Estimated Ship Time:6-12 working days
10+$1.7696
100+$1.738
250+$1.738
500+$1.7064
1,000+$1.7064
- +
Ext. Price(USD):$24.77
MOQ:14
Mult:1
HEADER, VERTICAL, 3WAY; Pitch Spacing:5mm; No. of Positions:3Ways; Wire Size (AWG):30AWG to 12AWG; Conductor Area CSA:2.5mm²; Wire Connection Method:Screw; Rated Current:20A; Rated Voltage:320V; Product Range:CTB9300/AO
Available Stock
850
Estimated Ship Time:6-12 working days
10+$0.52
100+$0.4659
2,500+$0.4493
5,000+$0.4493
- +
Ext. Price(USD):$26.00
MOQ:50
Mult:10
Conn Shrouded Header (4 Sides) M 2 POS 3.81mm Solder RA Side Entry Thru-Hole
Available Stock
445
Estimated Ship Time:6-12 working days
100+$0.2016
500+$0.1882
1,000+$0.1882
- +
Ext. Price(USD):$24.19
MOQ:120
Mult:10
Shrouded Header HDR 3 POS 5mm Solder ST Thru-Hole
Available Stock
5,418
Estimated Ship Time:6-12 working days
10+$0.52
100+$0.4659
2,500+$0.4493
5,000+$0.4493
- +
Ext. Price(USD):$26.00
MOQ:50
Mult:10
CamdenBoss
ECAD Model:
Shrouded Header (4 Sides) HDR 6 POS 5.08mm Solder ST Thru-Hole
Available Stock
222
Estimated Ship Time:6-12 working days
10+$0.9336
100+$0.8558
500+$0.8558
1,000+$0.8402
2,500+$0.8402
- +
Ext. Price(USD):$24.27
MOQ:26
Mult:1
Conn Shrouded Header (4 Sides), HDR, 2 POS, 5mm, Solder RA, Thru-Hole
Available Stock
5,893
Estimated Ship Time:6-12 working days
10+$0.4863
100+$0.4357
2,500+$0.4201
5,000+$0.4201
- +
Ext. Price(USD):$24.31
MOQ:50
Mult:10
CamdenBoss
ECAD Model:
Wire-to-Board Connector HDR 5 POS 3.81mm Solder ST Top Entry TH
Available Stock
30
Estimated Ship Time:6-12 working days
10+$1.2768
100+$1.254
500+$1.254
1,000+$1.2312
2,500+$1.2312
- +
Ext. Price(USD):$24.25
MOQ:19
Mult:1
25 / PageGoto